C-Crimps Copper Compression Connector, Run: #6 Sol - #4 Str, Tap #6 Sol - #6 Str, Length 41/64 Inch, Height 3/4 Inch

C-Crimps Copper Compression Connector, Run: #6 Sol - #4 Str, Tap 8 Sol - 8 Str, Length 41/64 Inch, Height 9/16 Inches

AMT 6 Port Same Side PVC Connector, Ultraviolet Resistant, Wire Range 250 kcmil-6 Str, Length 6.0 Inches, Width 2.13 Inches, Height 2.13 Inches, Hex Size 5/16 Inch

AMT 8 Port Both Sides PVC Connector, Ultraviolet Resistant, Wire Range 750-250 kcmil, Length 11.44 Inches, Width 3.13 Inches, Height 2.38 Inches, Hex Size 3/8 Inch, Black Insulation

AMT 5 Multi-Port Both Sides PVC Connector, Ultraviolet Resistant, Wire Range 500 kcmil-4 Str, Length 6.53 Inches, Width 3.0 Inches, Height 2.75 Inches, Hex Size 3/8 Inch, Black Insulation

AMT 8 Multi-Port Both Sides PVC Connector, Ultraviolet Resistant, Wire Range 250 kcmil-6 Str, Length 7.95 Inches, Width 2.64 Inches, Height 2.13 Inches, Hex Size 5/16 Inch, Black Insulation

Two-Bolt Bronze Plated Tap Connector 1/0 Str - 2 Sol Two-bolt bronze plated tap connectors are made of high strength bronze for heavy duty connections. For use with copper, aluminum and steel conductors.

Insulation Piercing Connector 500 MCM - 4/0 AWG Insulation piercing connectors are made for use with copper-copper, copper to aluminum and aluminum to aluminum applications. They are safe to use and are completely insulated, no need to strip wire. They can be installed on energized conductors with no contact at any point. No spacer required between connections. Exclusive "turbo spacer" keeps tap side open while main conductor is being tightened. Watertight and corrosion-free.

Copper C Tap Grounding Connector for 3/0 to 1/0 AWG Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Copper C Tap Grounding Connector for 6 to 8 AWG Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Powertap Wedge With Shell - Medium Tap, Aluminum - Bare Finish, Wire Combinations 3/0-2/0, 4/0-1/0. Uses Shell PT-Blue.

Aluminum Multi-Tap Encapsulated Cable Blocks, One-Way Configuration, Wire Range 250 kcmil-6 Str, Hex Size 5/16 Inch, Length 6.0 Inches, Width 2.13 Inches, Height 2.13 Inches, Outlets 6, Clear Insulation