Showing 745-756 of 934 results

Panduit
FRT12X4W6YL
The FiberRunner 12x4 Horizontal Tee attaches to the 12x4 channel and/or fittings to create a 90 horizontal branch with a 6x4 exit from a straight horizontal run.
Contact for Pricing

Panduit
FRFWC12X4YL
The FiberRunner 4-Way Cross Channel Fitting is used in cable management to create a horizontal 4-way cross intersection with two 12 inch x 4 inch exits. It also attaches to 12x4 channels and/or fittings. The 4-way cross channel fitting accepts the optional split cover.
Contact for Pricing

Panduit
FR6RMBEIA
Used to support the 6x4 and 4x4 systems attaching to the top of an equipment rack. Contains hardware to mount to the top of EIA/TIA equipment racks. No threaded rod required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.
Contact for Pricing

Panduit
FR6CS58M
Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 16mm threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FR6ACB58
Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 5/8in threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FR6CS12
Used to support the 6x4 and 4x4 systems from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the top of cabinets, For 1/2in threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FR12BS-L
Self-tapping screws allow selected 24x4 and 12x4 fittings to be fastened directly to mounting brackets for additional support. Screws tap directly into those 24x4 and 12x4 fittings that have plastic bosses.
Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*

Panduit
FRUPS4X4YL
4x4 Up Spout. Allows cable to be directed upward out of the channel deployed directly below racks and cabinets in underfloor installations. Provides 2in (50.8mm) bend radius. Snaps directly onto the channel and can be positioned to allow cables to be laid in. A 1in (25.4mm) top bezel is included. Other fittings can be installed for specific applications including FTR4X4YLL and FIDT4X4BL. Yellow.
Contact for Pricing

Panduit
FRRMBNF58
Used to support the 6x4 and 4x4 systems attaching to the top of NetFrame or NetRack Rack. (Contains all necessary mounting hardware.) Bracket accepts 5/8" threaded rod.
Contact for Pricing

Panduit
FR6TB38
Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 3/8in threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FR6TB12
Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*

Panduit
FR6TB12M
Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver on slide clamps, For 12mm threaded rod.
Contact for Pricing
Minimum Qty: 20
Multiplier: 1
*Contact for lower quantities*