nVent N210246G050 SpectraCool Narrow Indoor/Outdoor AC, 2000BTU 460V, Lt Gray, Steel
UPC: 783510349851
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Narrow design accommodates 12-inch (300-mm) deep cabinets
- Advanced Corrosion Protection Level 1 (ACP L1) Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
- Attractive industrial design with minimal use of visible fasteners
- Advanced Corrosion Protection Level 2 (ACP L2) Protection Includes: Everything that was coated in ACP L1, plus protective coatings applied to the evaporator (interior facing) side and an additional wrap around the thermostat
- Cleanable, reusable aluminum mesh filter protects coils for maximum cooling performance
- Outdoor model operating temperature range from -40 F/-40 C to 131 F/55 C (125 F/52 C on N28 Series)
- Reliable mechanical thermostat on enclosure side of the unit; indoor air conditioner models include digital display on ambient side
- Energy efficient rotary compressor on N36 and N43 models
- Dust-resistant condenser coil allows the unit to be run filterless in most applications
- Galvanized sheet-metal cover for rugged factory and outdoor environments
Specifications
Ambient Temperature | 40 Deg C |
Ambient Temperature | -40-131 °F |
Application | Power Distribution; Controls and Drives |
Application | Controls and Drives;Power Distribution |
Color | Light Gray |
Color | Gray |
Color Code | RAL 7035 |
Corrosion Resistant | No |
Depth | 251 mm |
Depth | 9.9 in |
Finish | Powder Coated |
Frequency | 1-phase |
Height | 639 mm |
Height | 25.17 in |
Material | Mild Steel |
Material | Steel |
Max Current | 1.9 A |
Mechanical Advantage | Galvanized Sheet Metal Standard (Optional: Stainless Steel) |
Mounting | Side wall |
Mounting Type | Floor and Wall Mount |
NEMA Rating | 12 Indoor, dust-resistant |
Nominal Capacity Btu/h | 2,000 Btu/h |
Nominal Capacity Watts | 586 W |
Nominal Voltage | 460 V |
Number Of Phases | 1 |
Operating Temperature | -40-55 °C |
Operating Temperature | -40-131 °F |
Operating Temperature | -40-55 |
Outdoor Installation | Yes |
Outdoor Installation | No |
Product Family | SpectraCool |
Protection Rating | NEMA Type 12 |
Refrigerant | R513A |
Remote Access Control | No |
Series | SpectraCool |
Thickness | 18 ga |
Thickness | 1.21 mm |
Thickness | 51.40mm (2.024") |
Type | Air Conditioners |
Voltage AC | 400-460 V |
Voltage Rating | 460 V |
Voltage Rating | 460 VAC 1PH |
Weight | 62 lb |
Weight | 25 kg |
Width | 254 mm |
Width | 10 IN |
Package Dimensions (L x W x H) | 13.5 IN x 13.5 IN x 28 IN |
Package Dimensions (L x W x H) | 34.29 cm x 34.29 cm x 71.12 cm |
Package Weight (Imperial) | 62.000 L |
Package Weight (Metric) | 28.123 kg |
How to Install the N210246G050 Air Conditioner
This guide provides step-by-step instructions for the installation and initial setup of the N210246G050 Air Conditioner, ensuring proper functionality and safety.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Gasket kit, Drain tube
- Inspect the air conditioner
Check for any visible damage and verify functionality by connecting the unit to a power supply. Ensure the compressor and blowers operate without excessive noise or vibration.
- Prepare the mounting location
Determine if the unit will be surface or recess mounted. Prepare the enclosure opening according to the cutout dimensions provided in the manual, ensuring adequate clearance for ventilation.
- Install the air conditioner
Using the gasket kit, attach gaskets to the air conditioner. Mount the unit using the provided 1/4-20x.625 mounting bolts, ensuring each bolt is torqued to 65 in./lbs. Allow the unit to remain upright for at least five minutes before starting.
- Connect the power supply
Refer to the nameplate for electrical requirements. Connect the power cord or wire the unit to a properly grounded power supply, following national wiring regulations. Avoid using an extension cord.
- Route the drain tube
Ensure the drain tube is installed with a continuous downward slope to prevent kinking. Verify that it is not elevated above the exit point of the air conditioner to avoid overflow.
- Test the air conditioner
After installation, power on the unit and allow it to run for 5-10 minutes. Check for proper operation of the evaporator and condenser blowers, and ensure the compressor is functioning without overheating.
- Calibrate the thermostat
Adjust the thermostat to the desired temperature setting. Remove the nylon plug and use a screwdriver to set the temperature. Ensure the setting is within the operational range specified in the manual.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.