nVent MAS0202015R5 Single Door encl. Mild Steel, MAS with Plate, 200x200x155mm, Light Gray
UPC: 783510487041
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
- Gland Plate Opening: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
- Protection: Complies with IP 66, TYPE 4, 12, IK 10. For outdoor installation, the use of a rain Hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Resistance to corrosion must be taken into consideration for outdo
- Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All
- Material: Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater. Gland plate: 1.4 mm mild st
- Lock: nVent HOFFMAN customized double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Two locks for 600 mm high to 800 mm high enclosures. Espagnolette three point locking for 1000 mm high enclosures and above. Other inserts are available a
- Finish: RAL 7035 structured powder coating.
- Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. Inner M6 welded studs to mount door profiles MMDP, see delivery. Sealing is ensured by an injected one piece p
- Delivery: Enclosure with door and mounting plate (not included for item numbers ending with PER5). For height 600 mm and above, two MMDP door mounting profiles. Gland plate(s) with gasket(s), plastic double-bit 3 mm key, and mounting accessories. Metallic
- Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Application | Factory Automation and Process Control; Controls and Drives |
Body Thickness | 1.5 mm |
Body Thickness | 16 ga |
Cable Entry | No |
Color | Light Gray |
Color | Gray |
Color | Grey |
Color | Light Gray;RAL 7035 Light Gray |
Color Code | RAL 7035 |
Construction | Body: 18 gauge Door: 18 gauge |
Cubic Capacity | 378 in3 |
Depth | 155 mm |
Depth | 155 |
Depth | 6.1 in |
Door Thickness | 14 ga |
Door Thickness | 1.5 mm |
Door Thickness | 16 ga |
Finish | Powder Coated |
Gland Plate Opening Depth | 3.78 in |
Gland Plate Opening Depth | 2.2 in |
Gland Plate Opening Width | 12.2 in |
Gland Plate Opening Width | 4.33 in |
Gland Plate Type | 0S |
Height | 200 mm |
Height | 7.87 in |
Height | 200 |
Insulation | No |
IP Rating | IP66 |
Latch Quantity | 1 |
Material | Mild Steel |
Material Quality | Mild Steel |
Max Mounting Depth | 11.1 in |
Max Mounting Depth | 5.39 in |
Mounting | Wall Mounted |
Mounting Plate Included | Yes |
Mounting Type | Wall Mount |
NEMA Rating | 12;4 |
NEMA Rating | NEMA Type 4 NEMA Type 12 NEMA Type 13 |
Number of Gland Plate Openings | 1 |
Number Of Outlet | 1 |
Panel Size | 6.69 x 5.91 in |
Panel Size | 72.00 x 72.00 in |
Protection Rating | NEMA Type 4 |
Series | MAS |
Size | 7.87 x 7.87 x 6.1 inch |
Size | 200x200x155 mm |
Style | With Mounting Plate |
Type | Mild Steel Wall Mounted Industrial Enclosures |
Weight | 32 lbs./100ft |
Weight | 6.7 lb |
Width | 200 mm |
Width | 7.87 in |
With or Without Panel | With |
Package Dimensions (L x W x H) | 8.25 IN x 8.25 IN x 6.53 IN |
Package Dimensions (L x W x H) | 20.955 cm x 20.955 cm x 16.5862 cm |
Package Weight (Imperial) | 6.700 L |
Package Weight (Metric) | 3.039 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What is the IP protection degree of this enclosure?
The enclosure has an IP 66 protection degree, complying with IEC 62208 IP66.
What material is the enclosure body made of?
The enclosure body is made of 1.2 mm mild steel, with a 16ga body thickness.
What is the finish and color of the enclosure?
The enclosure has a RAL 7035 structured powder coating in a light gray color.
Is a mounting plate included with this enclosure?
Yes, a mounting plate is included with the enclosure, marked at 10 mm intervals.
What are the dimensions of the MAS0202015R5 enclosure?
The enclosure has dimensions of 200x200x155mm (7.87in x 7.87in x 6.1in).
What type of lock does the enclosure use?
It features a nVent HOFFMAN customized double-bit 3 mm lock with a 90° movement.
What is the maximum mounting depth within the enclosure?
The maximum mounting depth is 5.39 inches.
What industry standards does the MAS0202015R5 enclosure meet?
It is UL 508A Listed (Type 4, 12), cUL Listed (Type 12), NEMA/EEMAC Type 4, 12, and CSA Type 4, 12.
What are the dimensions of the gland plate opening?
The gland plate opening is 4.33in wide and 2.2in deep.
How does the door open and what is its sealing mechanism?
The door surface mounts with 130° opening and uses concealed removable hinges. Sealing is ensured by a polyurethane gasket.
How to Install the MAS0202015R5 Controller
This guide provides step-by-step instructions for installing and configuring the MAS0202015R5 Controller on a DIN rail.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the MAS0202015R5 controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.
- Connect power supply
Using terminal connectors, connect the power supply wires to the designated input terminals on the controller. Verify that the connections are secure.
- Configure initial settings
Power on the controller and access the configuration menu. Set the required parameters according to your application needs and save the settings.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure accurate readings and performance. Use a multimeter to verify output signals.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.