nVent MAD0608030PER5 Double Door Enclosure, MAD, 23.62x31.50x11.81, Lt Gray, Steel, LP
UPC: 783510486488
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.
- Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
- Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Inner M6 welded studs to mount door profiles MMDP. Two removable mounting profiles on the right hand door and two on the left hand door. Sealing is ensured by an injecte
- Lock: Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.
- Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All
- Gland Plate Opening: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
- Protection: IP 55, TYPE 12, IK 10. For outdoor installation, the use of a rain hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Resistance to corrosion must be taken into consideration for outdoor and indoor app
- Finish: RAL 7035 structured powder coating.
- Delivery: Enclosure with doors and mounting plate (not included for item numbers ending with PER5). Two door mounting profiles on each door. Gland plate(s) with gasket(s), metallic double-bit 3 mm key, and mounting accessories. Earthing facilities.
- Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Body Thickness | 16 ga |
Color | Light Gray |
Color Code | RAL 7035 |
Depth | 300 mm |
Depth | 11.81 in |
Door Thickness | 14 ga |
Finish | Powder Coated |
Gland Plate Opening Depth | 3.78 in |
Gland Plate Opening Width | 12.2 in |
Gland Plate Type | 2 |
Height | 23.62 in |
Height | 600 mm |
IP Rating | IP66 |
Latch Quantity | 1 |
Material | Mild Steel |
Material Quality | Mild Steel |
Mounting Plate Included | No |
Mounting Type | Wall Mount |
Number of Gland Plate Openings | 2 |
Protection Rating | NEMA Type 12 |
Series | MAD |
Size | 23.62x31.50x11.81 in |
Type | Mild Steel Wall Mounted Industrial Enclosures |
Weight | 32 lbs./100ft |
Width | 800 mm |
Width | 31.5 in |
Package Dimensions (L x W x H) | 31.87 IN x 24 IN x 32.12 IN |
Package Dimensions (L x W x H) | 80.9498 cm x 60.96 cm x 81.5848 cm |
Package Weight (Imperial) | 66.800 L |
Package Weight (Metric) | 30.301 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the MAD0608030PER5 enclosure?
The enclosure has a height of 23.62 inches, a width of 31.5 inches, and a depth of 11.81 inches.
What material is the MAD0608030PER5 enclosure made from?
The enclosure body is made of 1.5 mm mild steel, the gland plate is 1.4 mm mild steel, and the door is 2 mm mild steel.
What is the protection degree of the MAD0608030PER5 enclosure?
The enclosure has an IP 55 protection degree, is Type 12, and IK 10 rated.
Does the MAD0608030PER5 enclosure include a mounting plate?
No, the mounting plate is not included with this specific item number (MAD0608030PER5).
What type of locking mechanism does the enclosure use?
The enclosure features a customized lock with a double-bit 3 mm insert and a 90° movement, utilizing a three-point espagnolette locking system.
What is the color and finish of the enclosure?
The enclosure has a RAL 7035 structured powder coating in a light gray color.
What are the industry standards this enclosure meets?
It is UL 508A Listed Type 12, cUL Listed Type 12, NEMA/EEMAC Type 12, CSA Type 12, and meets IEC 62208 IP55.
What are the dimensions of the gland plate opening?
The gland plate opening has a width of 12.2 inches and a depth of 3.78 inches.
How are the doors attached and how far do they open?
The doors are surface mounted with concealed removable hinges and a captive pin, allowing for a 130° opening.
What is recommended for outdoor installation of this enclosure?
For outdoor installation, using a rain hood (ARF), a polyester paint coating, and a corrosion protection primer is recommended.
How to Install MAD0608030PER5
This guide outlines the essential steps for safely mounting the MAD0608030PER5, including crucial safety warnings for surface preparation and enclosure integrity.
Estimated time: 15m
Tools needed:
T25 screwdriver
Supplies needed:
M4.8x9.5 screws, Galvanized steel floor plate (if applicable), Uncoated steel floor plate (if applicable)
- Prepare Mounting Surface
WARNING: If mounting on or over a combustible surface, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel, extending at least 150 mm beyond the equipment on all sides. Ensure the surface is ready for mounting.
- Mount the MAD0608030PER5
Securely attach the MAD0608030PER5 to the prepared surface using M4.8x9.5 screws. Use a T25 screwdriver for proper fastening to ensure a stable installation.
- Maintain Enclosure Integrity
WARNING: In order to maintain the environmental integrity of the enclosure, use devices with the same environmental ratings as the MAD0608030PER5 to close any openings in a customized enclosure.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.