nVent G521226G102 SpectraCool Advanced Corrosion Protection Lvl 1, 12000BTU 230V, Brushed, SS316
UPC: 783510211653
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Attractive industrial design with minimal use of visible fasteners
- Advanced Corrosion Protection Level 1 (ACP L1) Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
- Energy-efficient rotary compressor on most models
- Advanced Corrosion Protection Level 2 (ACP L2) Protection Includes: Everything that was coated in ACP L1, plus protective coatings applied to the evaporator (interior facing ) side and an additional wrap around the thermostat
- Cleanable, reusable aluminum mesh filter included to protect coils for maximum cooling performance in dirty environments
- Reliable mechanical thermostat on enclosure side of the unit
- All G-series come standard with two separate thermostats for cooling and heating when a heater is equipped
- Operating temperature range from -40 F/-40 C to 131 F/55 C
- Dust-resistant condenser coil allows the unit to be run filterless in most indoor applications
- Dual condenser-side air movers for performance redundancy on G52 and G57 models
Specifications
Ambient Temperature | 40 Deg C |
Ambient Temperature | -40-131 °F |
Amperage Rating | 2297 |
Application | Corrosive Environments; Controls and Drives; Power Distribution |
Application | Controls and Drives;Corrosive Environments;Power Distribution |
Btu Rating | 12,000 |
Color | Unpainted |
Color | Brushed |
Corrosion Resistant | Yes |
Depth | 11.66 in |
Depth | 296 mm |
Finish | Brushed #4 |
Frequency Rating | 50/60 Hz |
Frequency Rating, Maximum | 60 Hz |
Frequency Rating, Minimum | 50 Hz |
Height | 1,338 mm |
Height | 52.69 in |
Material | SS316 |
Material | SS316 Stainless Steel |
Material | Stainless Steel 316L |
Max Current | 10.9 A |
Model | G521226 |
Mounting | Side wall |
NEMA Rating | 4X Watertight, corrosion-resistant |
Nominal Capacity Btu/h | 12,000 Btu/h |
Nominal Capacity Watts | 3,500 W |
Nominal Voltage | 230 V |
Number Of Phases | 1 |
Operating Temperature | -40-55 |
Operating Temperature | -40-55 °C |
Operating Temperature | -40-131 °F |
Outdoor Installation | Yes |
Phase | 1 Ph |
Phase | 1 |
Poles | 1P |
Power | 3500 |
Product Family | SpectraCool |
Protection Rating | NEMA Type 4X |
Refrigerant | R513A |
Remote Access Control | No |
Series | SpectraCool |
Series | SpectraCool Advanced Corrosion Protection |
Size | 12000 BTU |
Size | 12000BTU |
Thickness | 1.21 mm |
Thickness | 18 ga |
Thickness | 51.40mm (2.024") |
Type | Air Conditioners |
Voltage AC | 200-250 V |
Voltage Rating | 230/208-230 V |
Voltage Rating | 230 V |
Weight | 59.4 kg |
Weight | 143 lb |
Width | 17.12 in |
Width | 435 mm |
Package Dimensions (L x W x H) | 19 IN x 15 IN x 55 IN |
Package Dimensions (L x W x H) | 48.26 cm x 38.1 cm x 139.7 cm |
Package Weight (Imperial) | 143.000 L |
Package Weight (Metric) | 64.865 kg |
Frequently Asked Questions
What is the cooling capacity of this unit?
This unit provides 12,000 BTU of cooling capacity, suitable for medium to large enclosures.
What voltage does the G521226G102 require?
The unit operates on a 230V, single-phase power supply.
Does this unit require filter maintenance?
No, the filterless design eliminates the need for regular filter replacements, reducing maintenance requirements.
Is this air conditioner suitable for marine environments?
Yes, the SS316 stainless steel construction provides superior resistance to saltwater spray and corrosive marine atmospheres.
What applications is this unit designed for?
It is ideal for chemical processing, offshore, and marine applications where corrosion resistance is critical.
How to Install the G521226G102 Air Conditioner
This guide provides step-by-step instructions for installing and configuring the G521226G102 air conditioner, ensuring proper functionality and safety.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, Mounting gasket kit
- Inspect the air conditioner
Check for any visible damage and verify functionality before proceeding with the installation. Ensure the unit is upright for at least five minutes before starting.
- Install mounting gaskets
Using the provided mounting gasket kit, attach the gaskets to the air conditioner to ensure a watertight seal.
- Mount the air conditioner
Securely mount the air conditioner to the enclosure, ensuring not to damage the gaskets. Start bolts by hand to avoid cross-threading before tightening.
- Wire the power supply
Refer to the nameplate for electrical requirements and connect the unit to a properly grounded power supply using copper conductors. Ensure the circuit is fused appropriately.
- Connect the thermostat
If required, wire the remote thermostat outputs to the appropriate terminals on the 24 VAC terminal strip according to the wiring diagram.
- Set the thermostat
Adjust the thermostat to the desired cabinet temperature, following the Sequence of Operation for guidance on settings.
- Test the air conditioner
After installation, power on the unit and verify that the evaporator fan starts and the compressor operates correctly. Monitor for any alarms or issues.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.