nVent G572026G101 SpectraCool Outdoor Partial Recess Mount G57, 20000BTU 230V, Lt Gray, Steel
UPC: 783510194512
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Attractive industrial design with minimal use of visible fasteners
- Advanced Corrosion Protection Level 1 (ACP L1) Protection Includes: Protective coatings only applied to copper tubing and coils on the condenser (exterior facing) side as well as thermostat coatings
- Energy-efficient rotary compressor on most models
- Advanced Corrosion Protection Level 2 (ACP L2) Protection Includes: Everything that was coated in ACP L1, plus protective coatings applied to the evaporator (interior facing ) side and an additional wrap around the thermostat
- Cleanable, reusable aluminum mesh filter included to protect coils for maximum cooling performance in dirty environments
- Reliable mechanical thermostat on enclosure side of the unit
- All G-series come standard with two separate thermostats for cooling and heating when a heater is equipped
- Operating temperature range from -40 F/-40 C to 131 F/55 C
- Dust-resistant condenser coil allows the unit to be run filterless in most indoor applications
- Dual condenser-side air movers for performance redundancy on G52 and G57 models
Specifications
Ambient Temperature | 40 Deg C |
Ambient Temperature | -40-131 °F |
Application | Controls and Drives;Power Distribution |
Btu Rating | 20,000 |
Color | Light Gray |
Color | Gray |
Color Code | RAL 7035 |
Corrosion Resistant | No |
Depth | 15.28 in |
Depth | 388 mm |
Finish | Powder Coated |
Frequency Rating | 50/60 Hz |
Frequency Rating, Maximum | 60 Hz |
Frequency Rating, Minimum | 50 Hz |
Height | 57.69 in |
Height | 1,465 mm |
Material | Mild Steel |
Material | Steel |
Max Current | 22.2 A |
Mounting | Side wall |
Mounting Type | Partial Recess Mount |
NEMA Rating | 4 Watertight |
Nominal Capacity Btu/h | 20,000 Btu/h |
Nominal Capacity Watts | 5,861 W |
Nominal Voltage | 230 V |
Number Of Phases | 1 |
Operating Temperature | -40-55 °C |
Operating Temperature | -40-131 °F |
Operating Temperature | -40-55 |
Outdoor Installation | Yes |
Phase | 1 Ph |
Phase | 1 |
Product Family | SpectraCool |
Protection Rating | NEMA Type 4 |
Refrigerant | R407C |
Remote Access Control | No |
Series | SpectraCool Outdoor Partial Recess Mount G57 |
Size | 20000 BTU |
Thickness | 20 ga |
Thickness | 51.40mm (2.024") |
Type | Air Conditioners |
Voltage AC | 200-250 V |
Voltage Rating | 230 V |
Weight | 89 kg |
Weight | 284 lb |
Width | 530 mm |
Width | 20.87 in |
Package Dimensions (L x W x H) | 26.25 IN x 19.5 IN x 62.5 IN |
Package Dimensions (L x W x H) | 66.675 cm x 49.53 cm x 158.75 cm |
Package Weight (Imperial) | 284.000 L |
Package Weight (Metric) | 128.822 kg |
G521216G054
G52 12000 BTU 115V 50/60HZ 1ph, Bulletin MCLG (SPECTRACOOL Air Conditioner), Size/Dims: 52.69x17.12x11.66 ex3Frequently Asked Questions
What is the operating voltage for this unit?
The SpectraCool G57 operates on 230V power with a terminal block power input.
What are the dimensions of the SpectraCool G57?
The unit measures 57.69 inches in height, 20.87 inches in width, and 15.28 inches in depth.
What is the operating temperature range?
The SpectraCool G57 operates from -40°F to 131°F (-40°C to 55°C).
Does the SpectraCool G57 include a filter?
Yes, it includes a cleanable, reusable aluminum mesh filter for maximum cooling performance in dirty environments.
What is the factory thermostat setting?
The factory thermostat setting is 80°F/27°C.
What refrigerant does the SpectraCool G57 use?
The unit uses R407c refrigerant with a charge of 48 ounces (1,361 grams).
How to Install the G572026G101 Air Conditioner
This guide provides step-by-step instructions for installing and configuring the G572026G101 air conditioner, ensuring proper functionality and safety.
Estimated time: 45m
Tools needed:
Screwdriver, Wrench or Ratchet Driver, Wire Strippers, Multimeter
Supplies needed:
Mounting screws, Mounting gasket kit, Terminal connectors
- Inspect the air conditioner
Check for any visible damage and verify functionality before proceeding with the installation.
- Install mounting gaskets
Using the provided mounting gasket kit, attach gaskets to the air conditioner to ensure a watertight seal.
- Mount the air conditioner
Securely mount the air conditioner on the enclosure, ensuring not to damage the gaskets. Avoid dragging the unit to prevent tearing the gaskets.
- Connect power supply
Refer to the nameplate for electrical requirements and wire the unit to a properly grounded power supply. Ensure the circuit is fused with a slow blow or HACR circuit breaker.
- Verify electrical phasing
For 3-phase units, check that the phase monitor light is illuminated after applying power, indicating correct electrical phasing.
- Wire the thermostat
If required, wire the remote mounted thermostat outputs to the appropriate terminals on the 24 VAC terminal strip, following the wiring diagram.
- Set the thermostat
Adjust the thermostat to the desired cabinet temperature, referring to the Sequence of Operation for guidance.
- Test the air conditioner
Allow the unit to remain upright for at least five minutes before starting. Power on the unit and verify that the evaporator blower starts running.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.