Authorized nVent Distributor
nVent G1000800300G - Fusion G7 Type 4 and 12, 1000x800X300, Lt Gray, Steel

nVent G1000800300G Fusion G7 Type 4 and 12, 1000x800X300, Lt Gray, Steel

UPC: 783510190040


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent HOFFMAN Fusion G7 wall-mount enclosure (SKU: G1000800300G) offers robust protection for industrial electrical and electronic components. Constructed from 2.0mm thick steel with a light gray RAL 7035 finish, this enclosure is rated for Type 4 and Type 12 applications, providing IP66 protection against dust and water ingress. Its dimensions are 1000x800x300mm, with internal dimensions of 955x755x500mm, allowing ample space for equipment. The 3-point quarter-turn latch ensures a secure seal. It is suitable for demanding environments in manufacturing, automation, energy, and telecommunications sectors. Manufactured by nVent, it meets UL, NEMA, and IEC standards.
  • 1000x800x300mm dimensions with 2.0mm thick steel construction
  • Type 4 and 12, IP66 rated for dust and water protection
  • 3-point quarter-turn latch for secure sealing
  • Designed for wall-mount applications
  • External formed 90-degree body flange channels away liquids
  • Three-point latching on enclosures 1000-mm high and taller
  • Door alignment device on doors with 3-point latching and 800 mm or wider
  • Pre-cut gland plate opening(s) in enclosure bottom
  • Quarter-turn latch(es) with 3-mm double-bit insert

Specifications

Application
Controls and Drives
Body Thickness
1.9 mm
Color
Light Gray
Color Code
RAL 7035
Depth
11.81 in
Door Thickness
1.9 mm
Finish
Powder Coated
Height
39.37 in
IP Rating
IP66
Latch Type
3-pt. Quarter-turn
Material
Mild Steel
Modification Services
Yes
NEMA Rating
12 Indoor, dust-resistant
Panel Size
37.60 x 29.72 in
Product Family
Fusion G7
Protection Rating
NEMA Type 12
Size
1000x800X300mm
Type
Mild Steel Wall Mounted Industrial Enclosures
Type Number
Type 4
Weight
135 lb
Width
31.5 in
Package Dimensions (L x W x H)
45 IN x 33 IN x 13.5 IN
Package Dimensions (L x W x H)
114.3 cm x 83.82 cm x 34.29 cm
Package Weight (Imperial)
135.000 L
Package Weight (Metric)
61.236 kg
Eclipse Inner Panel - Fits Encl. 30 x 30 - Steel/Wht

EP3030

Eclipse Inner Panel - Fits Encl. 30 x 30 - Steel/Wht
Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum

14A0705

Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum
External operation handle 0-1 type S01 Red Nema 4,4x

140E2911

External operation handle 0-1 type S01 Red Nema 4,4x
External operation handle 0-1 type S3 Black IP65

14333111

External operation handle 0-1 type S3 Black IP65
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey

LT20D-NEW

1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey

LN43DA

1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black

LH38

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
EP-RJG-M20-BL-A

1SNG618003R0000

EP-RJG-M20-BL-A
5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55

FF12D24NN53

5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55
12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12

FF20A115UE1

12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12

How to Install the G1000800300G Wall-Mount Enclosure

Installation guide for mounting and wiring the G1000800300G Wall-Mount Enclosure.

Estimated time: 1h

Tools needed:

Drill, Level, Measuring tape, Pliers, Screwdriver, Wire strippers, Wire cutters, Hammer

Supplies needed:

Mounting hardware, Wire connectors, Gasket, Grounding hardware

  1. Prepare the enclosure

    Unpack the enclosure and inspect for any damage. Remove any shipping materials. Install the gasket around the door frame according to the gasket instructions.

  2. Select mounting location

    Choose a suitable location for the enclosure. Ensure the mounting surface is strong enough to support the weight of the enclosure and its contents. Consider environmental factors and accessibility.

  3. Mark mounting holes

    Using a measuring tape and level, mark the desired mounting hole locations on the wall. Ensure the marks are level and spaced correctly for the enclosure's mounting brackets.

  4. Drill mounting holes

    Drill holes at the marked locations. Use a drill bit size appropriate for the chosen mounting hardware. If mounting to concrete or masonry, use appropriate anchors.

  5. Mount the enclosure

    Secure the enclosure to the wall using the appropriate mounting hardware. Ensure the enclosure is firmly attached and level. Do not overtighten fasteners.

  6. Install grounding

    Connect the grounding wire to the designated grounding point inside the enclosure and to the building's grounding system using the provided grounding hardware. Refer to electrical codes for proper grounding procedures.

  7. Wire internal components

    Install any internal components such as back panels, sub-panels, or mounting plates. Route wiring according to your electrical design. Use wire connectors as needed and ensure all connections are secure.

  8. Connect external wiring

    Route external power and control wiring into the enclosure through the appropriate conduit or cable entry points. Connect the wires to the internal terminals or components, ensuring proper polarity and secure connections. Strip wire ends as needed using wire strippers.

  9. Final inspection and closure

    Verify all wiring connections are secure and correct. Ensure no tools or debris are left inside the enclosure. Close and latch the enclosure door securely. For enclosures with key locks, ensure the key is retained in a safe place.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.