nVent F22WG - Gasket and Screws Feed-Through, fits 2.50x2.50, Black, Neoprene
nVent

F22WG

UPC: 783510141905

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The nVent F22WG Gasket and Screws Feed-Through Kit (SKU: F22WG) is an essential component for industrial enclosure applications requiring secure and reliable cable or conduit entry. Designed to integrate seamlessly with nVent's robust enclosure systems, this kit provides the necessary hardware to create a sealed passage through enclosure walls, ensuring environmental protection and maintaining the integrity of sensitive equipment housed within. When additional hardware is needed for feed-through applications, the F22WG kit offers a comprehensive solution. This feed-through kit is specifically engineered for enclosures with a 2.50x2.50 inch mounting footprint, offering a precise fit and simplifying installation. The black neoprene gasket is a critical element, providing superior sealing capabilities against dust, moisture, oil, and other contaminants commonly found in industrial environments. This robust sealing is paramount for protecting electrical and electronic components from corrosive elements and ensuring operational longevity. The included screws are manufactured to industrial standards, guaranteeing durability and a secure fastening for the gasket and any associated feed-through components. Applications for the nVent F22WG kit are widespread across various industries, including: * **Manufacturing and Automation:** Protecting control panels and automation equipment from harsh factory floor conditions. * **Telecommunications:** Ensuring the integrity of outdoor enclosures housing sensitive network equipment. * **Water and Wastewater Treatment:** Maintaining a sealed environment for control systems in exposed or wet locations. * **Oil and Gas:** Providing reliable sealing for equipment in challenging and potentially hazardous environments. * **Renewable Energy:** Protecting inverters and control systems for solar and wind power installations. The nVent F22WG kit is designed for ease of installation by qualified technicians. The straightforward design minimizes complexity, allowing for quick integration into existing or new enclosure builds. The high-quality materials used by nVent, a trusted leader in electrical enclosure solutions, ensure that this feed-through kit will perform reliably under demanding conditions. Choosing nVent means investing in dependable protection and operational continuity for your critical infrastructure. The F22WG is a testament to nVent's commitment to providing durable, high-performance solutions for the most challenging industrial requirements.
  • Feed-Through Gasket and Screws kit are used when additional hardware is needed
  • Includes durable black neoprene gasket for superior sealing.
  • Provides secure feed-through for cables and conduits.
  • Protects internal components from dust, moisture, and contaminants.
  • Manufactured by nVent, a trusted leader in industrial enclosures.

Specifications

Application
Power Distribution
Color
Black
Finish
Smooth Matte
Height
44 IN
Height
2.5
Height
64
IP Rating
IP54
Material
Neoprene
Material
Neoprene;Steel
Modification Services
Yes
NEMA Rating
12 Indoor, dust-resistant
NEMA Rating
12
Protection Rating
NEMA Type 12
Thickness
0.12 in
Thickness
51.40mm (2.024")
Type
Gasket Kit
Type
Gasket Kit;Industrial Feed-Through Wireway
Weight
0.23 lb
Width
2.5
Width
64
Width
23 IN
Wireway
Feed-Through NEMA Type 12 Wireway
Package Dimensions (L x W x H)
10.2 IN x 7.4 IN x 0.9 IN
Package Dimensions (L x W x H)
25.908 cm x 18.796 cm x 2.286 cm
Package Weight (Imperial)
0.220 L
Package Weight (Metric)
0.100 kg
Gasket and Screws Feed-Through, fits 4.00x4.00, Black, Neoprene

F44WG

Gasket and Screws Feed-Through, fits 4.00x4.00, Black, Neoprene
N12 Wireway, Cut-Off Fitting, Lay-In - Fits 12 x 6 - Steel/Gray

1485FW1

N12 Wireway, Cut-Off Fitting, Lay-In - Fits 12 x 6 - Steel/Gray
Wire Safe Fitting - 3 inch X 3 Inch Internal Coupling.

EGCIL

Wire Safe Fitting - 3 inch X 3 Inch Internal Coupling.
The T-45 raceway base without adhesive provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-45 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 10 ft and White.

T45BWH8

The T-45 raceway base without adhesive provides solutions for routing low voltage, fiber optic, and/or power cabling along perimeter walls. The T-45 raceway is supplied with pre-punched mounting holes and is tamper resistant. It is 10 ft and White.

How to Install the Feed-Through Wireway

This guide provides step-by-step instructions for installing and configuring the Feed-Through Wireway, ensuring proper assembly and secure connections.

Estimated time: 1h

Tools needed:

Screwdriver, Drill, Wire strippers

Supplies needed:

Mounting screws, Gaskets, Terminal connectors, Nut and lockwasher

  1. Assemble the wireway sections

    Place a gasket between the flanges of the wireway sections and secure them using screws and nuts as shown in the installation details.

  2. Install the telescope fitting

    Assemble the telescope fitting parts in the correct order, insert it into the straight section, and adjust to the desired length. Ensure the gasket is properly positioned against the flange.

  3. Anchor the telescope fitting

    Drill .25 inch diameter holes through the straight section and telescope fitting. Install .25−20x.5 screws from the outside and secure with cap nuts and lockwashers.

  4. Cut the wireway to length

    Cut the wireway body to the desired length, ensuring a square cut. Weld an extra flange to the body and grind off any burrs or sharp edges.

  5. Install swivel nipples

    Position the wireway section, flange gasket, swivel ring, and swivel nipple in order. Secure with clips, screws, and nuts as indicated in the details.

  6. Make box entries

    Cut out the necessary openings in the enclosure for box entries. Position the box connector and gasket inside the enclosure, ensuring proper alignment with the wireway.

  7. Assemble hangers

    Assemble the hangers according to the provided details, ensuring they are attached securely to the wireway flanges.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.