nVent EXE24208SS61 - ZonEx ATEX- and IECEx-Certified EXE Design Type 4X, 24x20x8, Brushed, SS 316
nVent

EXE24208SS61

UPC: 783510214869

Documents & Media
Installation Instructions

Contact for Pricing

Overview

Introducing the nVent HOFFMAN ZonEx ATEX- and IECEx-certified EXE Design Type 4X enclosure (SKU: EXE24208SS61), engineered for uncompromising performance in hazardous industrial environments. Fabricated from premium Type 316 stainless steel with 1.5mm body and cover thickness, this enclosure delivers exceptional corrosion resistance and structural integrity in corrosive, wet, or chemically aggressive conditions. The #4 brushed finish ensures a durable, low-maintenance surface while meeting stringent ATEX Directive 2014/34/EU and IECEx standards for increased safety in Zone 1 and Zone 2 hazardous locations. Designed for electrical component housing, the EXE24208SS61 provides IP66 and NEMA Type 4X protection, safeguarding sensitive electronics from dust, water ingress, and environmental contaminants. Key features include full-width welded wall-mounting brackets on top and bottom for secure installation, internal weld studs for panel or DIN rail mounting flexibility, and M6 brass internal/external bonding provisions for optimal grounding. The enclosure ships with a Type 316 stainless steel cover, cover screws, mounting plate, and hardware, ensuring a complete, ready-to-install solution. Choose between standard polyurethane gaskets (-40°C to +70°C) or optional silicone gaskets (-55°C to +180°C) for extreme temperature applications. Note: This ATEX Ex e enclosure is not intended for explosion-proof or flame-proof applications, aligning with nVent HOFFMAN’s commitment to precise certification compliance. Industries such as oil & gas, chemical processing, pharmaceuticals, food & beverage, and water treatment rely on nVent HOFFMAN ZonEx enclosures to protect critical control panels, PLCs, terminal blocks, and instrumentation in high-risk areas. The Type 316 stainless steel construction resists pitting and crevice corrosion, making it ideal for offshore platforms, refineries, and wastewater treatment facilities where saltwater exposure and chemical vapors are common. Installation is streamlined with pre-drilled mounting holes and bonded hardware, reducing labor time while ensuring compliance with international safety standards. nVent, a global leader in electrical and thermal management solutions, combines decades of expertise with rigorous testing to deliver enclosures that meet the demands of modern industrial operations. The ZonEx series reflects the company’s dedication to innovation, durability, and safety, backed by certifications from Sira and IECEx. Whether specifying enclosures for new installations or retrofitting existing systems, professionals trust nVent HOFFMAN for reliable, code-compliant protection in the most challenging environments. For hazardous location applications requiring Type 4X ingress protection and ATEX/IECEx certification, the EXE24208SS61 stands as a proven solution for long-term performance and peace of mind.
  • 10-mm brass internal/external bonding provision
  • Type 316 stainless steel quarter-turn latch with slotted insert
  • Large 3-mm-thick, flat gasketed gland plate(s)
  • Continuous seal gasket on door and gland plate(s)
  • Hardware for panel and bonding provisions included
  • Operating temperature range: -40 C to +70 C standard polyurethane gasket
  • Increased safety: Ex e. IECEx e certified
  • 3-mm thick individual welded-on top and bottom wall-mounting brackets
  • Increased safety: Ex e. IECEx e certified

Specifications

Application
Hazardous Environments
Color
Brushed
Color
Unpainted
Depth
8 in
Depth
203 mm
Finish
Brushed #4
Height
44 IN
Height
24
Height
610
IP Rating
IP66
Latch Quantity
1
Material
SS 316
Material
SS Type 316;Stainless Steel 316L
Material
Stainless Steel
Modification Services
Yes
Nema Rating
Type 4X
NEMA Rating
4X
Optional Panel
CP2420G
Product Family
Zonex
Protection Rating
NEMA Type 12
Series
ZonEx
Size
24.00x20.00x8.00 in
Size
24X20X8
Thickness
51.40mm (2.024")
Thickness
16 ga
Type
Stainless Steel Wall Mounted Industrial Enclosures
Type
Hazardous Location Enclosures
Type Number
Type 4X
Weight
37 lb
Width
20
Width
508
Width
23 IN
Package Dimensions (L x W x H)
28.5 IN x 23 IN x 10 IN
Package Dimensions (L x W x H)
72.39 cm x 58.42 cm x 25.4 cm
Package Weight (Imperial)
37.000 L
Package Weight (Metric)
16.783 kg
ZonEx ATEX- and IECEx-Certified EXE Design Type 4X, 20x20x8, Brushed, SS 316

EXE20208SS61

ZonEx ATEX- and IECEx-Certified EXE Design Type 4X, 20x20x8, Brushed, SS 316
Four Gang Masonry Box, 93.5 Cubic Inches, 3-3/4 Inches Long x 7-3/8 Inches Wide x 3-1/2 Inches Deep, 1/2 Inch and 3/4 Inch Concentric Knockouts, Galvanized Steel, Welded Construction, with #12 AWG Solid Ground Wire Pigtail, For use with Conduit

4MB-P

Four Gang Masonry Box, 93.5 Cubic Inches, 3-3/4 Inches Long x 7-3/8 Inches Wide x 3-1/2 Inches Deep, 1/2 Inch and 3/4 Inch Concentric Knockouts, Galvanized Steel, Welded Construction, with #12 AWG Solid Ground Wire Pigtail, For use with Conduit

How to Install the EXE24208SS61 Controller

This guide provides step-by-step instructions for installing and configuring the EXE24208SS61 controller on a DIN rail.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors

  1. Mount the controller

    Secure the EXE24208SS61 controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.

  2. Connect the wiring

    Use terminal connectors to connect the power and signal wires to the appropriate terminals on the controller. Ensure all connections are tight and secure.

  3. Verify the connections

    Use a multimeter to check the voltage at the power terminals to ensure proper power supply. Confirm that all connections are correctly wired according to the wiring diagram.

  4. Configure the controller

    Follow the manufacturer's instructions to program the controller settings using the provided software or interface. Ensure all parameters are set according to your application requirements.

  5. Calibrate the controller

    Perform calibration procedures as outlined in the documentation to ensure accurate operation. This may include setting reference points or adjusting sensitivity.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.