nVent CSD363612SSR Concept Wallmount Multi 1/4-Turn Latch 4X, 36x36x12, Brushed, SS304
UPC: 783510148331
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 304 stainless steel construction with brushed finish for corrosion resistance
- 36x36x12 inch dimensions with 1/4-turn latch for secure closure
- Door opens 210 degrees with removable hinges and captivation clips
- Seamless foam-in-place gasket ensures watertight and dust-tight seal
- Stainless steel quarter-turn latches with flush slotted insert provided on three sides of enclosure door
- Integral door alignment device to properly align door and gasket to body offset
- Panel mounting studs fit optional Concept panels and other accessories
- Mounting holes in back of body for direct mounting or for optional external mounting brackets
- Stainless steel hidden hinges
- Doors are interchangeable and easily removed by pulling clip-style hinge pins
Specifications
Application | Corrosive Environments; Controls and Drives |
Application | Controls and Drives;Corrosive Environments |
Body Thickness | 14 ga |
Body Thickness | 1.98 mm |
Body Thickness | 16 ga |
Color | Unpainted |
Color | Brushed |
Conductive Panel | CP3636G |
Depth | 305 mm |
Depth | 12 |
Door Thickness | 14 ga |
Door Thickness | 1.98 mm |
Finish | Brushed #4 |
Height | 914 mm |
Height | 36 in |
Ip Rating | IP66/IP67 |
Ip Rating | IP4X |
IP Rating | IP66 |
Latch Quantity | 4 |
Latch Type | Quarter-turn |
Material | 304 Stainless Steel |
Material | SS304 Stainless Steel |
Material | SS304 |
Material | Stainless Steel;Stainless Steel 304 |
Material | Stainless Steel 304 |
Modification Services | Yes |
Mounting | Wall Mounting Brackets Available |
Mounting | 34.50 x 34.50 in |
Mounting Type | Wallmount |
NEMA Rating | 12 |
NEMA Rating | 12 Indoor, dust-resistant |
Nema Rating | Type 4X |
Panel | CP3636 |
Panel Size | 34.20 x 34.20 in |
Panel Size | 869 x 869 mm |
Product Family | Concept |
Protection Rating | NEMA Type 12 |
Series | Concept |
Series | Concept Series |
Size | 36.00x36.00x12.00 in |
Size | 36x36x12 |
Size | 36x36x12 inches |
Style | Quarter-turn |
Type | Stainless Steel Wall Mounted Industrial Enclosures |
Type Number | Type 3R |
Weight | 101 lb |
Width | 914 mm |
Width | 36 in |
Package Dimensions (L x W x H) | 40.7 IN x 37 IN x 14 IN |
Package Dimensions (L x W x H) | 103.378 cm x 93.98 cm x 35.56 cm |
Package Weight (Imperial) | 101.000 L |
Package Weight (Metric) | 45.814 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the dimensions of the CSD363612SSR?
The enclosure measures 36 inches wide by 36 inches high by 12 inches deep.
What is the NEMA rating for this enclosure?
The CSD363612SSR is rated NEMA/EEMAC Type 4, 12, and 13.
What is the IP rating of the CSD363612SSR?
The enclosure has an IP66 rating per IEC 60529.
What material is the CSD363612SSR made from?
The enclosure is constructed from 304 stainless steel with a brushed finish.
Does the CSD363612SSR have a gasket?
Yes, it features a seamless foam-in-place gasket for watertight and dust-tight sealing.
How many degrees does the door open?
The door opens to 210 degrees for easy access.
Is the door removable on the CSD363612SSR?
Yes, the door is removable and includes hidden hinges for a clean appearance.
What applications is the CSD363612SSR suitable for?
It is ideal for food processing, water treatment, chemical handling, pharmaceutical manufacturing, and general industrial automation.
How to Install the CSD363612SSR Wall-Mount Enclosure
Follow these instructions to properly mount and install your CSD363612SSR wall-mount enclosure.
Estimated time: 1h
Tools needed:
Drill, Level, Measuring tape, Screwdriver, Wrench or socket set
Supplies needed:
Mounting hardware (screws, anchors, bolts), Gasket (if applicable), Sealing fittings (if applicable)
- Select Mounting Location
Choose a suitable location for the enclosure. Ensure the mounting surface is strong enough to support the weight of the enclosure and its contents. Consider environmental factors such as temperature, humidity, and potential exposure to corrosive elements. Refer to the datasheet for specific environmental ratings.
- Prepare the Enclosure
If necessary, install any required accessories such as internal mounting panels, gland plates, or door stops. Ensure the gasket is properly seated around the door flange for a watertight seal. If using sealing fittings for cable entry, install them according to their specific instructions.
- Mark Mounting Holes
Hold the enclosure in the desired position against the mounting surface. Use a level to ensure it is straight. Mark the locations for the mounting holes through the designated mounting points on the back of the enclosure or the internal mounting panel.
- Drill Mounting Holes
Remove the enclosure from the mounting surface. Drill the mounting holes at the marked locations. If mounting to a concrete or masonry surface, use appropriate masonry bits and install anchors. If mounting to a metal surface, ensure the holes are appropriately sized for the chosen fasteners.
- Mount the Enclosure
Position the enclosure over the drilled holes. Secure the enclosure to the mounting surface using appropriate hardware (screws, bolts, etc.). Ensure the enclosure is firmly attached and does not move. Use a wrench or socket set for tightening bolts as needed.
- Install Equipment and Wiring
Install any internal equipment according to its specific instructions. Route wiring through the appropriate conduit or cable entries, ensuring proper strain relief and sealing. Refer to the wiring diagrams provided with the equipment and the enclosure datasheet for guidance on wire management and sealing.
- Final Inspection
Close and latch the enclosure door securely. Verify that all seals are properly engaged and that the enclosure is watertight or weatherproof as required by its rating. Double-check that all mounting hardware is tight and that the installation is secure.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.