Authorized nVent Distributor
nVent CR230216G013 - ProAir Harsh Environment Outdoor 3R CR23, 1600BTU 115V, Lt Gray, Steel

nVent CR230216G013 ProAir Harsh Environment Outdoor 3R CR23, 1600BTU 115V, Lt Gray, Steel

UPC: 783510453299


Documents & Media
Installation Instructions

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The nVent ProAir Harsh Environment Outdoor Air Conditioner (SKU: CR230216G013) delivers 1600BTU cooling at 115V with dual 50/60Hz compatibility for global installations. The compact 23" x 10" x 8.75" design includes a hinged front door for tool-free maintenance access, while the cleanable aluminum mesh filter and smooth surface minimize downtime. Operating from -40°F to 131°F, the unit uses R-134A refrigerant and includes a mechanical thermostat set at 80°F. Ideal for cooling control panels, PLCs, and VFDs in chemical plants, oil/gas facilities, and outdoor telecom enclosures, the ProAir unit is factory-tested and ships with mounting hardware and gaskets.
  • Easy maintenance: hinged front cover allows quick access to all components; condenser coil can be cleaned while unit is still mounted to the cabinet
  • Smooth surface with minimal use of visible fasteners
  • Cleanable reusable aluminum mesh filter protects coils for maximum cooling performance
  • Operating temperature range from -40 F/-40 C to 131 F/55 C (with optional low-ambient package)
  • Reliable mechanical thermostat located behind the filter of the unit
  • Robust reciprocating compressor
  • Low-carbon mild-steel sheet-metal cover for rugged factory and outdoor environments
  • High-performance fans and blowers designed for densely packed enclosures
  • Easy-mount flanges for simple installation
  • Every unit functionally tested before shipping

Specifications

Amperage Rating
4 A
Application
Controls and Drives;Corrosive Environments;Power Distribution
Btu Rating
1,600
Color
Gray
Color
Lt Gray
Color
Light Gray
Color Code
RAL 7035
Depth
8.75 in
Depth
222 mm
Finish
Powder Coated
Frequency
50/60 Hz
Frequency Rating
50/60 Hz
Frequency Rating, Maximum
60 Hz
Frequency Rating, Minimum
50 Hz
Height
23 IN
Height
584 mm
Housing Material
Mild Steel
Material
Mild Steel
Material
Steel
Max Current
4 A
Mechanical Advantage
Stainless steel optional
Model
Surface Mounted
NEMA Rating
NEMA 3R
NEMA Rating
12 Indoor, dust-resistant
NEMA Rating
Type 3R
Nominal Capacity Btu/h
1,600 Btu/h
Nominal Capacity Watts
469 W
Nominal Voltage
115 V
Number Of Phases
1
Operating Temperature
-40-131 °F
Operating Temperature
-40-55 °C
Operating Temperature
-40-55
Operating Temperature
131 deg F
Outdoor Installation
Yes
Power
469 W
Product Family
ProAir
Protection Rating
NEMA Type 12
Refrigerant
R513A
Remote Access Control
No
Series
ProAir Harsh Environment Outdoor 3R CR23
Series
ProAir Harsh Environment Outdoor AC
Size
1600BTU
Thickness
1.21 mm
Thickness
18 ga
Thickness
51.40mm (2.024")
Type
Air Conditioners
Voltage AC
100-120 V
Voltage Rating
115 VAC
Voltage Rating
115 V
Weight
26 kg
Weight
49 lb
Width
254 mm
Width
10 IN
Package Dimensions (L x W x H)
13.5 IN x 12 IN x 26 IN
Package Dimensions (L x W x H)
34.29 cm x 30.48 cm x 66.04 cm
Package Weight (Imperial)
49.000 L
Package Weight (Metric)
22.226 kg
ProAir Harsh Environment Indoor with Cntr CR23, 1600BTU 115V, Lt Gray, Steel

CR230216G016

ProAir Harsh Environment Indoor with Cntr CR23, 1600BTU 115V, Lt Gray, Steel
DTS 3061 115V 60Hz LTGY

13382344355

DTS 3061 115V 60Hz LTGY
AC Unit 5-7000 BTU/H 115 V - NEMA 3R/4 - Lt. Gray

DTS3165A115N3LG

AC Unit 5-7000 BTU/H 115 V - NEMA 3R/4 - Lt. Gray
InRow RC 300mm Chilled Water

ACRC301S

InRow RC 300mm Chilled Water
Vortex Cooler Type 12, 900BTU 115V, Brushed, Aluminum

VC0916012

Vortex Cooler Type 12, 900BTU 115V, Brushed, Aluminum
Vortex Cooler Type 4, 2500BTU 115V, Brushed, Aluminum

VC2516004

Vortex Cooler Type 4, 2500BTU 115V, Brushed, Aluminum
Vortex Cooler Type 12, 400BTU 115V, Brushed, Aluminum

VC0416012

Vortex Cooler Type 12, 400BTU 115V, Brushed, Aluminum
Vortex Cooler Type 4X, 900BTU 115V, Brushed, SS304

VC091604X

Vortex Cooler Type 4X, 900BTU 115V, Brushed, SS304

Frequently Asked Questions

What are the dimensions of the unit?

The unit measures 23 inches in height, 10 inches in width, and 8.75 inches in depth.

What is the cooling capacity of the CR230216G013?

The unit provides 1600BTU of cooling capacity at 115V with dual 50/60Hz compatibility.

Is the housing corrosion-resistant?

Yes, the housing is a mild steel sheet metal with light-gray powder-coat finish for outdoor corrosion resistance.

What is the operating temperature range?

The air conditioner operates from -40°F to 131°F, with optional low-ambient package for extended range.

Does it include mounting hardware?

Yes, mounting hardware, gaskets, and a user manual are furnished with the unit.

How to Install the CR230216G013 Air Conditioner

Installation guide for mounting and wiring the CR230216G013 air conditioner.

Estimated time: 45m

Tools needed:

Screwdriver, Wrench, Ratchet driver

Supplies needed:

Mounting gasket kit, Mounting bolts, Washers

  1. Inspect and Test Functionality

    Inspect the air conditioner for any shipping damage. Verify its functionality by operating it for 5-10 minutes. Ensure no excessive noise or vibration is present, and that the condenser blower, evaporator blower, and compressor are running. Condenser air temperatures should become warmer than room temperature within minutes. If the unit was in a horizontal position, ensure it has been upright for at least 5 minutes before testing. Do not operate the unit while horizontal, as this can damage the compressor and void the warranty.

  2. Prepare Enclosure Openings

    Using the cutout dimensions provided in this manual, prepare the enclosure for the air 'IN' and air 'OUT' openings, as well as the mounting bolt hole pattern.

  3. Install Gaskets

    Apply the provided mounting gasket kit to the rear of the air conditioner according to the instructions on page 6.

  4. Mount the Air Conditioner

    Mount the air conditioner onto the enclosure using the provided mounting bolts and washers. Start bolts by hand to avoid cross-threading, then tighten with a wrench or ratchet driver. Ensure the unit remains upright during operation.

  5. Connect Power Supply

    Refer to the top of the nameplate for electrical requirements. Connect the power cord to a properly grounded power supply. Use of an extension cord is not recommended. The electrical circuit should be fused with a slow blow or HACR circuit breaker. Check the nameplate or datasheet for specific electrical current requirements, as minimum circuit ampacity should be at least 125% of the amperage shown.

  6. Adjust Temperature Controller (if applicable)

    If the unit is equipped with an automatic temperature controller, it is preset at the factory. For Level I controllers, disconnect power, open the front panel, and adjust the controller screw clockwise to decrease or counter-clockwise to increase the temperature set point. For Level II and III controllers, refer to the separate programming manual. After adjustment, close the front panel and restore power.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.