nVent CDSC423212 Concept Disconnect Enclosure Type 4, 42.00x32.00x12.00, Gray, Steel
UPC: 783510782900
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Seams continuously welded and ground smooth
- External-formed 90-degree body flange channels away liquids
- Bonding provision on door; grounding stud on body
- Holes in body for mounting disconnect operating handle and operating mechanism
- Panel mounting studs fit optional Concept panels and other accessories
- Mounting holes in back of body for direct mounting for optional external mounting brackets
- Removable door with hidden hinges for clean, aesthetic appearance
- Corner-formed doors
- Provisions on door for optional high-impact thermoplastic data pocket
- Seamless foam-in-place gasket
Specifications
Application | Arc Flash Safety;Controls and Drives;Power Distribution |
Application | Controls and Drives; Arc Flash Safety; Power Distribution |
Body Thickness | 1.9 mm |
Body Thickness | 14 ga |
Body Thickness | 16 ga |
Color | ANSI 61 Gray;Gray |
Color | Gray |
Color Code | ANSI 61 |
Concept Panel | CP4230 |
Conductive Panel | CP4230G |
Depth | 305 mm |
Depth | 12 in |
Door Thickness | 14 ga |
Door Thickness | 1.9 mm |
Finish | Powder Coated |
Height | 42 in |
Height | 42 mm |
Height | 1,067 mm |
IP Rating | IP66 |
Latch Quantity | 1 |
Latch Style | 3-point |
Latch Type | 3-Point |
Material | Steel |
Material | Mild Steel |
Modification Services | Yes |
Mounting | 40.50 x 30.50 in |
Mounting | Wall Mounting Brackets Available |
NEMA Rating | 4 |
NEMA Rating | 4 Watertight |
Panel Size | 40.20 x 28.20 in |
Panel Size | 1021 x 716 mm |
Product Family | Concept |
Protection Rating | NEMA Type 4 |
Size | 42.00x32.00x12.00 in |
Type | Mild Steel Wall Mounted Industrial Disconnect Enclosures |
Type Number | Type 4 |
Weight | 80 lb |
Width | 813 mm |
Width | 32 in |
Width | 32 mm |
Package Dimensions (L x W x H) | 42 IN x 32 IN x 12 IN |
Package Dimensions (L x W x H) | 106.68 cm x 81.28 cm x 30.48 cm |
Package Weight (Imperial) | 80.000 L |
Package Weight (Metric) | 36.288 kg |
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the CDSC423212?
The enclosure measures 42.00 inches in height, 32.00 inches in width, and 12.00 inches in depth.
What is included in the hardware kit?
The kit includes a padlocking door handle, panel mounting nuts, grounding hardware, and sealing washers for mounting holes.
Is the handle tool-accessible?
Yes, the enclosure features an integrated tool-to-open handle for maintenance access.
Can this enclosure be used outdoors?
Yes, the Type 4 rating ensures protection against rain, sleet, snow, and external impacts in outdoor environments.
What materials is the enclosure made from?
The enclosure is constructed from durable steel with a gray finish.
How to Install the CDSC423212 Wall-Mount Enclosure
Follow these instructions to properly mount and install your CDSC423212 wall-mount enclosure.
Estimated time: 1h
Tools needed:
Drill, Level, Measuring tape, Screwdriver, Wrench or socket set
Supplies needed:
Mounting hardware (screws, anchors, bolts), Gasket (if applicable), Sealing fittings (if applicable)
- Select Mounting Location
Choose a suitable location for the enclosure. Ensure the mounting surface is strong enough to support the weight of the enclosure and its contents. Consider environmental factors such as temperature, humidity, and potential exposure to corrosive elements. Refer to the datasheet for specific environmental ratings.
- Prepare the Enclosure
If necessary, install any required accessories such as internal mounting panels, gland plates, or door stops. Ensure the gasket is properly seated around the door flange for a watertight seal. If using sealing fittings for cable entry, install them according to their specific instructions.
- Mark Mounting Holes
Hold the enclosure in the desired position against the mounting surface. Use a level to ensure it is straight. Mark the locations for the mounting holes through the designated mounting points on the back of the enclosure or the internal mounting panel.
- Drill Mounting Holes
Remove the enclosure from the mounting surface. Drill the mounting holes at the marked locations. If mounting to a concrete or masonry surface, use appropriate masonry bits and install anchors. If mounting to a metal surface, ensure the holes are appropriately sized for the chosen fasteners.
- Mount the Enclosure
Position the enclosure over the drilled holes. Secure the enclosure to the mounting surface using appropriate hardware (screws, bolts, etc.). Ensure the enclosure is firmly attached and does not move. Use a wrench or socket set for tightening bolts as needed.
- Install Equipment and Wiring
Install any internal equipment according to its specific instructions. Route wiring through the appropriate conduit or cable entries, ensuring proper strain relief and sealing. Refer to the wiring diagrams provided with the equipment and the enclosure datasheet for guidance on wire management and sealing.
- Final Inspection
Close and latch the enclosure door securely. Verify that all seals are properly engaged and that the enclosure is watertight or weatherproof as required by its rating. Double-check that all mounting hardware is tight and that the installation is secure.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.