Contact for Pricing
Overview
- Material: AISI 304L / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door for AISI 304L: 1.5 mm / 2 mm for enclosures with a height or width of 600 mm or greater. Door for AISI 316L: 2 mm. Mounting plate: 2 mm galvanized steel.
- Body: Folded and seam welded. For ease of installation, each back corner of the enclosure is laser-marked to precisely indicate where to drill holes and affix AWS wall mounting brackets.
- Door: Corner formed in one piece. Surface mounted, with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Can be mounted to allow left or right hand opening. Sealing is ensured by an injected polyurethane gasket. For AISI 316L, sea
- Lock: nVent HOFFMAN customized zamak double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Two locks for 600 mm high to 800 mm high enclosures. Espagnolette three point locking or 3 locks for 1000 mm high enclosures and above. Stainless st
- Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All
- Cable access: No gland plate openings as standard, to maximise sealing and cleanliness.
- Protection: Corresponds with IP 66, TYPE 4X, 12, IK 10.
- Finish: 400 pre-grained stainless steel.
- Delivery: Enclosure with door, mounting plate, plastic double-bit 3 mm key, and mounting accessories. Metallic key, for height 1000 mm and above.
- Additional information: For outdoor environments, exposed to precipitation, the use of a rain hood is advised. Also in environments known for quick temperature changes, consideration to condensation should be taken. Please see the thermal management secti
Specifications
Application | Corrosive Environments; Factory Automation and Process Control; Hazardous Environments |
Application | Hazardous Environments; Corrosive Environments; Factory Automation and Process Control |
Body Thickness | 1.5 mm |
Body Thickness | 16 ga |
Cable Entry | No |
Color | Unpainted |
Color | Brushed Stainless |
Color | Brushed |
Connection | No |
Construction | Body: 16 gauge Door: 14 gauge |
Cubic Capacity | 3204 Cu-in |
Depth | 8.27 in |
Depth | 210 mm |
Door Thickness | 14 ga |
Door Thickness | 2 mm |
Finish | Brushed |
Height | 19.69 in |
Height | 500 mm |
Insulation | No |
IP Rating | IP66 |
Knockouts | No |
Latch Quantity | 1 |
Material | AISI 316L Stainless Steel |
Material | Stainless 316 |
Material | Stainless Steel 316 |
Max Mounting Depth | 192 mm |
Max Mounting Depth | 7.55 in |
Mounting | Wall Mounted |
Mounting Type | Wall-mounted |
Mounting Type | Wall Mount |
Nema Rating | Type 4X |
Number Of Outlet | 1 |
Protection Rating | NEMA Type 12 |
Series | ASR |
Size | 500x500x210mm |
Size | 19.69 x 19.69 x 8.27 inch |
Type | Stainless Steel Wall Mounted Industrial Enclosures |
Weight | 16.3 kg |
Weight | 35.89 lb |
Width | 500 mm |
Width | 19.69 in |
Package Dimensions (L x W x H) | 20.06 IN x 20.06 IN x 8.89 IN |
Package Dimensions (L x W x H) | 50.9524 cm x 50.9524 cm x 22.5806 cm |
Package Weight (Imperial) | 35.890 L |
Package Weight (Metric) | 16.280 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
ASR0505021-316 Installation Safety and General Mounting
This guide outlines critical safety warnings for preparing mounting surfaces and maintaining enclosure integrity for ASR0505021-316, concluding with a general instruction for device mounting.
Estimated time: 15m
- Prepare Mounting Surface for Combustible Materials
WARNING: If mounting ASR0505021-316 on or over a combustible surface, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel. This plate must extend at least 150 mm beyond the equipment on all sides to ensure safety.
- Maintain Enclosure Environmental Integrity
WARNING: To maintain the environmental integrity of the ASR0505021-316 enclosure, use devices with the same environmental ratings to close any openings in a customized enclosure.
- Mount the ASR0505021-316 Device
Securely mount the ASR0505021-316 device in the intended location. Ensure all pre-installation safety guidelines, including surface preparation and enclosure integrity, are thoroughly addressed before final mounting.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.