Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: AISI 304L / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door for AISI 304L: 1.5 mm / 2 mm. Door for AISI 316L: 2 mm. Mounting plate: 2 mm galvanized steel.
- Body: Folded and seam welded. For ease of installation, each back corner of the enclosure is laser-marked to precisely indicate where to drill holes and affix AWS wall mounting brackets.
- Door: Corner formed in one piece. Surface mounted, with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Can be mounted to allow left or right hand opening. Sealing is ensured by an injected polyurethane gasket or by an injected s
- Lock: nVent HOFFMAN customized zamak double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Two locks for 600 mm high to 800 mm high enclosures. Espagnolette three point locking or 3 locks for 1000 mm high enclosures and above. Stainless st
- Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All
- Cable access: No gland plate openings as standard, to maximise sealing and cleanliness.
- Protection: Corresponds with IP 66, TYPE 4X, 12, IK 10.
- Finish: 400 pre-grained stainless steel.
- Delivery: Enclosure with door, mounting plate, plastic double-bit 3 mm key, and mounting accessories. Metallic key, for height 1000 mm and above.
- Additional information: For outdoor environments, exposed to precipitation, the use of a rain hood is advised. Also in environments known for quick temperature changes, consideration to condensation should be taken. Please see the thermal management secti
Specifications
Application | Hazardous Environments; Factory Automation and Process Control; Corrosive Environments |
Application | Corrosive Environments;Factory Automation and Process Control;Hazardous Environments |
Body Thickness | 1.5 mm |
Body Thickness | 16 ga |
Cable Entry | No |
Color | Unpainted |
Color | Other |
Color | Brushed |
Connection | No |
Construction | Body: 16 gauge Door: 16 gauge |
Cubic Capacity | 3204 in3 |
Depth | 210 mm |
Depth | 8.27 in |
Door Thickness | 1.5 mm |
Door Thickness | 16 ga |
Door Thickness | 14 ga |
Finish | Brushed |
Gasket Type | Polyurethane |
Height | 500 mm |
Height | 19.69 in |
Insulation | No |
IP Rating | IP66 |
Knockouts | No |
Latch Quantity | 1 |
Material | Stainless Steel 304 |
Material | Stainless 304 |
Material Quality | Stainless Steel 304 |
Material Quality | Stainless steel V2A |
Max Mounting Depth | 192 mm |
Max Mounting Depth | 11.1 in |
Max Mounting Depth | 7.55 in |
Mounting | Wall Mounted |
Number Of Outlet | 1 |
Protection Rating | NEMA Type 12 |
Series | ASR |
Size | 500x500x210mm |
Size | 19.69 x 19.69 x 8.27 inch |
Type | Stainless Steel Wall Mounted Industrial Enclosures |
Weight | 32 lbs./100ft |
Weight | 16.1 kg |
Weight | 35.56 lb |
Width | 19.69 in |
Width | 500 mm |
Package Dimensions (L x W x H) | 20.06 IN x 20.06 IN x 8.89 IN |
Package Dimensions (L x W x H) | 50.9524 cm x 50.9524 cm x 22.5806 cm |
Package Weight (Imperial) | 35.560 L |
Package Weight (Metric) | 16.130 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the dimensions of the ASR0505021 enclosure?
The enclosure has a height of 19.69 inches, a width of 19.69 inches, and a depth of 8.27 inches.
What material is the ASR0505021 enclosure made of?
The enclosure is made of Stainless Steel 304 with a brushed finish. The body thickness is 16ga and the door thickness is 16ga.
What is the protection degree of the ASR0505021 enclosure?
The enclosure has an IP 66 protection degree and corresponds with TYPE 4X, 12, and IK 10.
What industry standards does the ASR0505021 enclosure meet?
It is UL 508A Listed, cUL Listed, NEMA/EEMAC Type 4, 4X, 12, and CSA Type 4, 4X, 12, IEC 62208 IP66.
What type of gasket is used for sealing the enclosure?
The enclosure uses an injected polyurethane gasket for sealing.
What is the locking mechanism on the ASR0505021 enclosure?
It features a nVent HOFFMAN customized zamak double-bit 3 mm lock with a 90° movement and anti-vibration mechanism.
How is the mounting plate positioned within the enclosure?
The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning and is fixed onto M8 press welded studs.
Are there any gland plate openings on the enclosure?
No, there are no gland plate openings as standard to maximize sealing and cleanliness.
What is included with the delivery of the enclosure?
The delivery includes the enclosure with door, mounting plate, a plastic double-bit 3 mm key, and mounting accessories.
What is the maximum mounting depth for equipment inside the enclosure?
The maximum mounting depth for equipment inside the enclosure is 7.55 inches.
How to Install the ASR0505021 Controller
This guide provides step-by-step instructions for mounting, wiring, and configuring the ASR0505021 Controller.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the ASR0505021 controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.
- Connect the power supply
Using terminal connectors, connect the power supply wires to the designated input terminals on the controller. Verify the polarity is correct.
- Configure initial settings
Power on the controller and access the configuration menu. Set the required parameters according to your application needs and save the settings.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure accurate readings and performance. Use a multimeter to verify output signals.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.