nVent ADR1001030 Double Door Enclosure, ADR, 1000x1000x300mm, Brushed, Stainless 304
UPC: 783510117337
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: AISI 304L / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door: 2 mm. Mounting plate: 2.5 mm galvanized steel.
- Body: Folded and seam welded. For ease of installation, each back corner of the enclosure is laser-marked to precisely indicate where to drill holes and affix AWS wall mounting brackets.
- Door: Corner formed in one piece. Surface mounted, with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Sealing is ensured by an injected polyurethane gasket or by an injected silicone gasket. Inner M6 welded studs to mount optio
- Lock: nVent HOFFMAN customized zamak double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Espagnolette three point locking. Stainless steel lock and other versions are available as accessories.
- Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All
- Cable access: No gland plate openings as standard, to maximise sealing and cleanliness.
- Finish: 400 pre-grained stainless steel.
- Protection: Corresponds with IP 55, TYPE 12, IK 10.
- Delivery: Enclosure with door, mounting plate, metallic key and mounting accessories.
- Additional information: For outdoor environments exposed to precipitation, the use of a rain hood is advised. Also in environments known for quick temperature changes, consideration to condensation should be taken. Please see the thermal management sectio
Specifications
Application | Corrosive Environments;Factory Automation and Process Control;Hazardous Environments |
Application | Factory Automation and Process Control; Hazardous Environments; Corrosive Environments |
Body Thickness | 16 ga |
Body Thickness | 1.5 mm |
Cable Entry | No |
Color | Unpainted |
Color | Other |
Color | Brushed |
Connection | No |
Construction | Body: 16 gauge Door: 14 gauge |
Cubic Capacity | 18307 in3 |
Depth | 300 mm |
Depth | 11.81 in |
Door Thickness | 14 ga |
Door Thickness | 2 mm |
Finish | Brushed |
Gasket Type | Polyurethane |
Height | 39.37 in |
Height | 1,000 mm |
Insulation | No |
IP Rating | IP55 |
Knockouts | No |
Latch Quantity | 1 |
Material | Stainless Steel 304 |
Material | Stainless 304 |
Material Quality | Stainless Steel 304 |
Material Quality | Stainless steel V2A |
Max Mounting Depth | 282 mm |
Max Mounting Depth | 11.1 in |
Mounting | Wall Mounted |
Mounting Type | Wall mounted |
Number Of Outlet | 1 |
Protection Rating | NEMA Type 12 |
Series | ADR |
Size | 1000x1000x300mm |
Size | 39.37 x 39.37 x 11.81 inch |
Type | Stainless Steel Wall Mounted Industrial Enclosures |
Weight | 32 lbs./100ft |
Weight | 70 kg |
Weight | 154.35 lb |
Width | 1,000 mm |
Width | 39.37 in |
Package Dimensions (L x W x H) | 39.75 IN x 39.75 IN x 12.44 IN |
Package Dimensions (L x W x H) | 100.965 cm x 100.965 cm x 31.5976 cm |
Package Weight (Imperial) | 154.350 L |
Package Weight (Metric) | 70.013 kg |
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the ADR1001030 enclosure?
The enclosure has dimensions of 39.37 inches in height, 39.37 inches in width, and 11.81 inches in depth.
What material is the ADR1001030 enclosure made of?
The enclosure is constructed from Brushed Stainless Steel 304, with a body thickness of 16ga and a door thickness of 14ga.
What is the protection degree of the ADR1001030 enclosure?
The enclosure offers IP 55 protection, is Type 12 rated, and IK 10.
What industry standards does the ADR1001030 enclosure meet?
It is UL 508A Listed Type 12, cUL Listed Type 12, NEMA/EEMAC Type 12, and CSA Type 12.
What type of gasket is used for sealing the ADR1001030 enclosure?
The enclosure uses an injected polyurethane gasket for sealing.
What is the maximum mounting depth for equipment inside the enclosure?
The maximum mounting depth for equipment within the enclosure is 11.1 inches.
What type of locking mechanism does the ADR1001030 enclosure feature?
It features a nVent HOFFMAN customized zamak double-bit 3 mm lock with a 90° movement and an espagnolette three-point locking system.
Does the ADR1001030 enclosure come with a gland plate?
No, the enclosure does not have gland plate openings as standard to maximize sealing and cleanliness.
What accessories are included with the ADR1001030 enclosure delivery?
The delivery includes the enclosure with door, a mounting plate, a metallic key, and mounting accessories.
When is a rain hood recommended for the ADR1001030 enclosure?
A rain hood is advised for outdoor environments exposed to precipitation.
How to Install the ADR1001030 Controller
This guide provides step-by-step instructions for mounting, wiring, and configuring the ADR1001030 Controller.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the ADR1001030 controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.
- Connect the power supply
Using terminal connectors, connect the power supply wires to the designated input terminals on the controller. Verify that the connections are secure.
- Configure the controller settings
Power on the controller and use the interface to navigate to the configuration menu. Set the required parameters according to your application needs.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual. Use a multimeter to verify output signals and adjust settings as necessary.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.