nVent A48X1E4024 Low-Profile 1-Door Disconnect Type 12, 48.00x40.25x24.00, Gray, Steel
UPC: 783510136581
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Seams continuously welded and ground smooth
- Body stiffeners in larger enclosures for extra rigidity
- Body flange trough excludes liquids and contaminants
- Heavy duty lifting eyes anchor into reinforced top on larger models
- Removable centerposts for easy panel installation
- Concealed, easy-to-remove hinges
- Heavy duty latch mechanism operated by zinc die-cast padlocking defeater handle on all doors; 2-point latch on enclosures up to 36 in. (914 mm); 3-point latch on enclosures 42 in. (1067 mm) and above
- Oil-resistant gasket
- Removable .127-in. thick steel panels mount on collar studs
- Master door is far right-hand door on all enclosures
Specifications
Application | Arc Flash Safety;Controls and Drives;Power Distribution |
Application | Controls and Drives; Arc Flash Safety; Power Distribution |
Color | Gray |
Color Code | ANSI 61 |
Conductive Panel | A42P33G |
Depth | 610 mm |
Depth | 24 |
Finish | Powder Coated |
Height | 1,219 mm |
Height | 48 in |
IP Rating | IP55 |
Lifting Eye Quantity | 2 |
Lifting Eyes | 2 |
Material | Mild Steel |
Material | Steel |
Modification Services | Yes |
NEMA Rating | 12 Indoor, dust-resistant |
NEMA Rating | 12 |
Panel | A42P33 |
Panel Quantity | 1 |
Protection Rating | NEMA Type 12 |
Size | 48.00x40.25x24.00 in |
Thickness | 51.40mm (2.024") |
Thickness | 2.48973 mm |
Thickness | 0.098 in |
Type | Mild Steel Wall Mounted Industrial Disconnect Enclosures |
Type Number | Type 12 |
Weight | 276 lb |
Width | 1,022 mm |
Width | 40.25 in |
Width | 1,022 |
Package Dimensions (L x W x H) | 45 IN x 31 IN x 53 IN |
Package Dimensions (L x W x H) | 114.3 cm x 78.74 cm x 134.62 cm |
Package Weight (Imperial) | 276.000 L |
Package Weight (Metric) | 125.194 kg |
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the A48X1E4024 enclosure?
The enclosure measures 48.00 inches in width, 40.25 inches in depth, and 24.00 inches in height.
What is the material and finish of the A48X1E4024?
The enclosure is made of 0.098-inch thick steel with an ANSI 61 gray powder-coated finish.
Does the A48X1E4024 accommodate disconnect switches?
Yes, the enclosure has pre-drilled holes for operating handles and hardware to accommodate major brand disconnect switches.
What internal features does the A48X1E4024 have?
Internal features include collar studs for mounting optional panels, a high-impact thermoplastic data pocket, and guide brackets with door catch.
Is the A48X1E4024 suitable for motor control centers?
Yes, the enclosure is ideal for motor control centers, power distribution systems, and control panels in manufacturing and automation applications.
How to Install the A48X1E4024 Single and Multi-Door Disconnect Enclosure
Instructions for installing hubs, door catches, and ensuring proper panel mounting for the A48X1E4024 disconnect enclosure.
Estimated time: 30m
Tools needed:
Screwdriver, Hole saw or Greenlee-type punch, Electric or air powered vibrating hammer, Small diameter punch
Supplies needed:
CSA approved, watertight, rigid conduit hubs, External toothed lockwasher, Nuts, Door catch (furnished by disconnect manufacturer)
- Prepare for Hub Installation
Determine the required hole size and flat surface area for your conduit size using the provided table. Use a hole saw or Greenlee-type punch to cut the necessary holes in the enclosure for conduit entry.
- Install Conduit Hubs
Install the CSA approved, watertight, rigid conduit hubs into the prepared openings according to the hub manufacturer's instructions. Ensure hubs are designed to fit standard conduit openings.
- Secure the Panel
When installing the panel, position it on the studs that line up properly. Use a suitable screwdriver inserted through the panel holes to pry the remaining studs into position. Install the enclosed external toothed lockwasher under one of the nuts securing the panel to ensure bonding between the panel and enclosure.
- Attach Door Catch
Fasten the door catch (furnished by the disconnect manufacturer) to the bracket that is fastened to the inside of the A48X1E4024 master door. Refer to the disconnect manufacturer's instructions to properly adjust the door catch with the disconnect operating handle.
- Handle Hinges (If Necessary)
If removing hinge pins from continuous hinges, use a small diameter punch to drive the pin towards the bottom. Bend the protruding pin into a 'J' shape. Use a vibrating hammer with a suitable tool to drive the pin out while opening and closing the door. Reinstall the hinge pin by straightening it and driving it in with the vibrating hammer while opening and closing the door. Start the chamfered end first if applicable.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.