nVent A30N248LP - Hinged-Cover with Recessed Handle Type 1, 30.00x24.00x8.62, Gray, Steel
nVent

A30N248LP

UPC: 783510809805

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The nVent Type 1 Hinged-Cover Enclosure, SKU A30N248LP, offers robust protection for electrical controls and instrumentation in indoor environments. Engineered with a durable gray steel construction and measuring 30.00 inches in height, 24.00 inches in width, and 8.62 inches in depth, this enclosure is designed to meet basic functionality requirements while ensuring the longevity and reliability of housed components. Its Type 1 rating signifies suitability for applications where protection against falling dirt and general contact is paramount. This medium-sized enclosure features a convenient hinged cover equipped with a recessed T-handle, facilitating easy access for maintenance, inspection, and operational adjustments. The recessed design of the handle not only contributes to a clean aesthetic but also prevents accidental snagging, enhancing safety in industrial settings. The straightforward, yet effective, design makes it an ideal choice for a wide range of applications, including: * **Control Panels:** Housing motor starters, relays, timers, and other control devices. * **Instrumentation:** Protecting sensitive measurement and monitoring equipment. * **Junction Boxes:** Providing secure termination points for electrical wiring. * **Power Distribution:** Safeguarding smaller distribution components. Manufactured by nVent, a trusted leader in electrical enclosure solutions, this product benefits from the company's extensive experience and commitment to quality. The steel construction offers inherent strength and resistance to physical impact, while the gray powder-coat finish provides a layer of corrosion resistance and a professional appearance. Installation is straightforward, with provisions for mounting that accommodate standard industrial practices. Professionals can rely on the consistent quality and performance expected from nVent products, ensuring that critical electrical systems remain protected and operational. The dimensions of 30x24x8.625 inches provide ample space for typical control and instrumentation layouts, allowing for organized wiring and component placement. When selecting an enclosure for basic indoor protection, the nVent Type 1 Hinged-Cover Enclosure, A30N248LP, stands out as a reliable and cost-effective solution.
  • Butt hinges on door
  • Mounting holes on back of enclosure
  • Flush cover and offset body
  • Recessed T-handle latch is flush with door
  • 16 or 14 gauge steel

Specifications

Application
Controls and Drives;Power Distribution
Application
Power Distribution; Controls and Drives
Color
Gray
Color Code
ANSI 61
Depth
8.62
Depth
219
Depth
219 mm
Finish
Powder Coated
Gauge
14 ga
Height
30 IN
Height
762 mm
IP Rating
IP30
Material
Steel
Material
Mild Steel
Modification Services
Yes
Mounting
Wall Mounting Brackets Available
Mounting
27.50 x 16.75 in
NEMA Rating
1
NEMA Rating
Type 1
NEMA Rating
1 Indoor, electrical protection
Panel
A30N24MP
Panel Gauge
12
Panel Size
26.00 x 22.50 in
Panel Size
660 x 572 mm
Protection Rating
NEMA Type 1
Size
30.00x24.00x8.62
Size
30.00x24.00x8.62 in
Stud Quantity
6
Thickness
51.40mm (2.024")
Thickness
14 ga
Thickness
1.9 mm
Type
Wall-Mounted / Pad-Mounted Enclosures
Type
Mild Steel Wall Mounted Industrial Enclosures
Type Number
Type 1
Weight
55 lb
Width
610 mm
Width
24 IN
Package Dimensions (L x W x H)
35 IN x 25.25 IN x 10 IN
Package Dimensions (L x W x H)
88.9 cm x 64.135 cm x 25.4 cm
Package Weight (Imperial)
55.000 L
Package Weight (Metric)
24.948 kg
Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum

14A0705

Panel 6.9 x 4.9 - Fits Encl. 8 x 6 - Alum
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.

BX4

Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black

LH38

Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
EP-RJG-M20-BL-A

1SNG618003R0000

EP-RJG-M20-BL-A
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey

LN43DA

1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey

LT20D-NEW

1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
External operation handle 0-1 type S01 Red Nema 4,4x

140E2911

External operation handle 0-1 type S01 Red Nema 4,4x
Escutcheon black type B for Sircover 125-630A

44095015

Escutcheon black type B for Sircover 125-630A
12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12

FF20A115UE1

12,80" x 12,80" filter fan - 115Vac - 285.3 cfm - RAL 7035 - Type 12
5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55

FF12D24NN53

5,90" x 5,90" filter fan - 24Vdc - 20.6 cfm - RAL 9005 - Type 3R - IP55

How to Install the A24R208NK Controller

This guide provides step-by-step instructions for installing and configuring the A24R208NK Controller.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Wire connectors

  1. Mount the controller

    Secure the A24R208NK controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.

  2. Connect the power supply

    Using wire connectors, connect the power supply wires to the designated terminals on the controller. Ensure that the connections are secure and insulated.

  3. Verify the connections

    Use a multimeter to check the voltage at the power terminals to ensure the controller is receiving the correct voltage as specified in the manual.

  4. Configure the controller settings

    Access the controller's configuration menu using the interface. Set the desired parameters according to your application requirements.

  5. Calibrate the controller

    Follow the calibration procedure outlined in the manual to ensure the controller operates accurately. This may involve adjusting settings based on feedback from connected sensors.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.