Contact for Pricing
Overview
- Seams continuously welded and ground smooth
- External wall-mounting brackets for easy installation
- Formed external return flanges around all sides of enclosure opening
- Stainless steel screw-down clamps on one or three sides of door
- Removable heavy gauge stainless steel continuous hinge pin
- Hasp and staple for padlocking
- Data pocket is high-impact thermoplastic
- Collar studs provided for mounting optional panels
- Bonding provision on door
- Removable door with continuous hinge
Specifications
Application | Controls and Drives |
Clamp Quantity | 2 |
Color | Gray |
Conductive Panel | A24P20G |
Data Pocket | Small |
Depth | 152 mm |
Depth | 6 |
Depth | 152 |
Exterior Color | Gray |
Exterior Color Code | ANSI 61 |
Finish | Powder Coated |
Height | 508 mm |
Height | 20 mm |
Interior Color | Gray |
Interior Color | White |
Interior Color Code | ANSI 61 |
IP Rating | IP65 |
IP Rating | IP66 |
Material | Steel |
Material | Mild Steel |
Modification Services | Yes |
Nema Rating | Type 4 |
NEMA Rating | 12 |
NEMA Rating | 12 Indoor, dust-resistant |
Panel | A24P20 |
Panel Size | 533 x 432 mm |
Panel Size | 21.00 x 17.00 in |
Protection Rating | NEMA Type 12 |
Series | LP |
Size | 20.00x24.00x6.00 in |
Size | 20X24X6 |
Thickness | 51.40mm (2.024") |
Thickness | 16 ga |
Thickness | 1.9 mm |
Type | Mild Steel Wall Mounted Industrial Enclosures |
Type Number | Type 13 |
Weight | 36 lb |
Width | 610 mm |
Width | 24 IN |
Package Dimensions (L x W x H) | 25 IN x 24.3 IN x 8 IN |
Package Dimensions (L x W x H) | 63.5 cm x 61.722 cm x 20.32 cm |
Package Weight (Imperial) | 36.000 L |
Package Weight (Metric) | 16.330 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
Frequently Asked Questions
What are the dimensions of the A202406LP enclosure?
The enclosure measures 20 inches in height, 24 inches in width, and 6 inches in depth.
What material is the A202406LP enclosure made from?
The enclosure is constructed from 16-gauge mild steel with a gray polyester powder coating.
What certifications does the A202406LP enclosure have?
The enclosure is UL 508A Listed, cUL Listed per CSA C22.2 No. 94, NEMA/EEMAC Type 3, 4, 12, 13, and CSA File No. 42186 (Type 4 and 12). It also meets IEC 60529 IP66 standards.
What is the enclosure's IP rating?
The A202406LP enclosure has an IP66 rating per IEC 60529, providing protection against dust and water ingress.
What applications is the A202406LP enclosure suitable for?
The enclosure is designed for protecting electrical and electronic components in indoor and outdoor industrial environments, including manufacturing, telecommunications, and oil & gas sectors.
What features ensure a secure seal in the A202406LP enclosure?
The enclosure features clamps on three sides, a seamless foam-in-place gasket, and continuously welded seams to create a secure seal against contaminants.
Is the A202406LP enclosure corrosion-resistant?
Yes, the enclosure has an ANSI 61 gray polyester powder coating that provides enhanced corrosion resistance for outdoor applications.
Where is the A202406LP enclosure manufactured?
The A202406LP enclosure is manufactured in the USA by nVent.
How to Install the A202406LP Enclosure
Instructions for mounting and adjusting the A202406LP enclosure, including door and panel installation.
Estimated time: 1h
Tools needed:
Screwdriver, Punch, Vibrating hammer (electric or air powered)
Supplies needed:
Fasteners, Metal shims, Hinge pin
- Prepare for Mounting
Identify whether the enclosure is wall-mounted or floor-mounted. Wall-mounted enclosures have internal mounting means or external feet. Floor-mounted enclosures have floor stands with mounting plates. Ensure you have the proper fasteners for your chosen mounting method.
- Mount the Enclosure
Secure the enclosure to the wall or floor using the appropriate fasteners in all mounting holes. For floor-mounted enclosures, ensure the floor is level or use shims under the enclosure corners as needed. For wall-mounted enclosures, ensure the mounting surface is flat to prevent door issues.
- Adjust Door Closing (if necessary)
If the door does not open and close properly, or if it sags due to heavy equipment, adjust as follows: For single-door enclosures, place metal shims behind the bottom mounting foot closest to the hinge if the top of the door strikes the body opening lip. For two-door enclosures, place metal shims under the corners if the floor is not level, ensuring the doors meet evenly. Bolt the enclosure in place with doors closed before installing shims.
- Install the Interior Panel
When installing the interior panel, you may need to slightly bend mounting studs to align the panel. Position the panel on the studs that line up, then use a screwdriver inserted through the panel holes to pry the remaining studs into place.
- Remove or Invert Print Pocket
The print pocket on the door can be inverted or removed entirely as needed.
- Install Hubs and Devices
Use agency Type rated hubs or devices of equal rating to the enclosure. Ensure hole openings and installation follow manufacturer instructions. Verify adequate hole-to-hole spacing for tightening and that installation does not interfere with the enclosure's gasket or edges. Conduit connections should be on the top, bottom, and sides.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.