Authorized Panduit Distributor
Panduit ZDF242430 - The pre-configured industrial distribution frame (IDF) is 12 RU and is made for two 19" rack mount switches. The IDF is engineered to deploy and protect 19" rack mount switches on the factory floor. The IDF protects switches, both physically and thermally in harsh industrial environments. The IDF includes keys, cage nut rails, one fiber tray, two patch panels, cable management, ground whips/bar/cable, DIN rail mounting provision, and cable/fiber/power penetration recommendation template.

Panduit ZDF242430 The pre-configured industrial distribution frame (IDF) is 12 RU and is made for two 19"…

UPC: 613056268593

Documents & Media
BrochureTechnical BulletinTechnical DrawingFull Engineering DrawingInstallation InstructionsSpecification Sheet

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The Panduit ZDF242430 is a pre-configured 12U Industrial Distribution Frame (IDF) designed for the deployment and protection of 19-inch rack-mount Ethernet switches in factory floor environments. This enclosure meets UL 508A, UL Type 4/12 or 4/4X/12, and IP66 ratings, ensuring robust protection against harsh industrial conditions. It is thermally and spatially validated for operation in environments up to 50°C, with additional back-end space providing up to 3X the cooling capacity of typical deployments for enhanced reliability. The IDF accommodates two distribution layer switches or two access layer switches with UPS, supporting copper and fiber-based deployments. Pre-installed grounding, a standardized equipment layout, and defined cable routings based on Panduit best practices streamline installation and ensure network reliability. The key-locking handle on the mild steel enclosure provides security. Dimensions for the mild steel version are 24.09"H x 23.62"W x 31.06"D (612mm x 600mm x 789mm). The unit offers wall-mount capability with secure front and rear switch access. It supports 12 Rack Units (RU) capacity, suitable for two 1U switches and one 2U UPS, with provisions for 96 incoming copper cables and 72 strands of fiber or 36 fiber duplex ports (expandable to 72 ports). The maximum load rating is 250 lbs. This pre-configured solution reduces planning, design, procurement, and installation time, potentially leading to up to 25% faster implementation. Includes keys, cage nut rails, one fiber tray, two patch panels, cable management, ground whips/bar/cable, DIN rail mounting provision, and a cable/fiber/power penetration recommendation template.
  • 12U Industrial Distribution Frame (IDF) for 19" rack-mount switches
  • UL 508A, UL Type 4/12 or 4/4X/12, and IP66 rated for industrial environments
  • Thermally validated for up to 50°C ambient temperature
  • Accommodates two 1U switches and one 2U UPS
  • Pre-configured with grounding, cable management, and mounting provisions

Specifications

Application
Industrial Automation
Color
Gray
Depth
29.95 in
Depth
760.73 mm
Finish
Powder Coat
Material
Steel
Mounting
Wall Mount
Mounting Type
19" Rack Mount
Mounting Type
19" Rack Mount, DIN Rail Provision
Series
Panduit IDF Series
Series
ZDF
Series
ZDF Series
Size
12 RU
Standard
RoHS Compliant;UL 508A Standard for Industrial Control Panels, cUL Listed per CSA, UL Type 4/12 or 4/4X/12 and IP66 Rated
Type
Industrial Distribution Frame
Width
23.62 in
Width
599.948 mm
Package Dimensions (L x W x H)
44 IN x 44 IN x 40 IN
Package Weight (Imperial)
200 lbs
The pre-configured industrial distribution frame (IDF) is 26 RU and is made for up to five 19" rack mount switches. The IDF is engineered to deploy and protect 19" rack mount switches on the factory floor. The IDF protects switches, both physically and thermally in harsh industrial environments. The IDF includes keys, cage nut rails, one fiber tray, two patch panels, cable management, ground whips/bar/cable, DIN rail mounting provision, and cable/fiber/power penetration recommendation template.

ZDF48-RA

The pre-configured industrial distribution frame (IDF) is 26 RU and is made for up to five 19" rack mount switches. The IDF is engineered to deploy and protect 19" rack mount switches on the factory floor. The IDF protects switches, both physically and thermally in harsh industrial environments. The IDF includes keys, cage nut rails, one fiber tray, two patch panels, cable management, ground whips/bar/cable, DIN rail mounting provision, and cable/fiber/power penetration recommendation template.
Mini-Link Dist Box, 4 Outlet, 5M cable

3400004

Mini-Link Dist Box, 4 Outlet, 5M cable
Mini-Link Dist Box, 6 Outlet, connector feed

3400002

Mini-Link Dist Box, 6 Outlet, connector feed
Single Key (M12) Micro-Link Dist Box, 4 Outlet, 10M cable

3400012

Single Key (M12) Micro-Link Dist Box, 4 Outlet, 10M cable
Single Key (M12) Micro-Link Dist Box, 6 Outlet, 5M cable

3400016

Single Key (M12) Micro-Link Dist Box, 6 Outlet, 5M cable
Single Key (M12) Micro-Link Dist Box, 6 Outlet, 10M cable

3400018

Single Key (M12) Micro-Link Dist Box, 6 Outlet, 10M cable
Single Key (M12) Micro-Link Dist Box, 6 Outlet, connector feed

3400020

Single Key (M12) Micro-Link Dist Box, 6 Outlet, connector feed
Mini-Link Dist Box, 4 Outlet, connector feed

3400001

Mini-Link Dist Box, 4 Outlet, connector feed

How to Install the Panduit Industrial Distribution Frame (IDF) ZDF242430

This guide provides step-by-step instructions for installing and setting up the Panduit Industrial Distribution Frame (IDF) model ZDF242430.

Estimated time: 1h 30m

Tools needed:

Screwdriver, Drill, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors, Conduit, Fiber cables, Copper cables, Patch panels

  1. Unpack the IDF enclosure

    Remove the IDF enclosure from its packaging and take out the miscellaneous carton on top.

  2. Mount the IDF enclosure

    Open the front door and center section. Secure the enclosure to the wall using the six mounting holes on the wall section.

  3. Install power connections

    Install an outlet box compliant with local IEC standards, pull the power cable through the conduit into the outlet box, and terminate the power and ground according to local codes.

  4. Install fiber trunk cables

    Pull the fiber trunk cables through the conduit into the enclosure, route them through the Panduit Duct, and install them into the FRME1U Fiber Enclosure.

  5. Install copper trunk cables

    Pull the Switch-A trunk cable through the conduit into the enclosure, route it up the left side of the rear Backplane, and secure it using Tak-Ty and D-rings.

  6. Install switches

    Install the Copper Switch A in RU7 and connect it to the patch panel in RUs 5 and 6. Repeat for Copper Switch B in RU11.

  7. Connect power to switches

    Attach the power cords for both switches to the UPS and ensure all connections are secure.

  8. Verify installation

    Check all connections, ensure the enclosure is properly mounted, and verify that all cables are secured and routed correctly.

Frequently Asked Questions about Panduit

What environmental ratings do Panduit products have?

Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.

What certifications and standards do Panduit products comply with?

Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.

What industries and applications are Panduit products used for?

Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.

What are the main product lines offered by Panduit?

Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.

What are the key features of Panduit products?

Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.

What is Panduit's warranty policy?

Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.

What technical support does Panduit offer?

Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.

What accessories are available for Panduit products?

Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.

How are Panduit products typically installed?

Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.