Authorized Panduit Distributor
Panduit LCD6-56DH-L - Two-hole, standard barrel lug with window, #6 AWG wire, 5/16 stud hole, 1 hole spacing, 45 angle tongue..
Panduit

LCD6-56DH-L

UPC: 074983566679

Documents & Media
Technical DrawingFull Engineering DrawingInstallation Instructions

Contact for Pricing

Minimum Qty: 50

Multiplier: 1

*Contact for lower quantities*

Overview

The Panduit LCD6-56DH-L is a two-hole, standard barrel compression lug designed for terminating #6 AWG stranded copper conductors. This lug features a tin-plated copper construction for excellent conductivity and corrosion resistance. The standard barrel design maximizes crimp points, ensuring superior wire pull-out strength and reliable performance. An integrated inspection window allows for visual confirmation of full conductor insertion, a critical step for ensuring a secure connection. The tongue is angled at 45 degrees, facilitating easier installation in confined spaces or when routing wires at an angle. This lug is UL Listed and CSA Certified to 35kV and is temperature rated to 90°C when crimped with appropriate Panduit or specified competitor tools and dies. It has also been tested by Telcordia to meet NEBS Level 3 and is American Bureau of Shipping approved. The Panduit LCD6-56DH-L utilizes the Panduit P24 die index number for proper crimp die selection. The stud hole size is 5/16 inches, with a hole spacing of 1 inch. The wire strip length required is 0.81 inches. This product is manufactured in the USA. SKU: LCD6-56DH-L. UNSPSC Code: 39121405. The long barrel design is a key feature for achieving high pull-out strength and consistent electrical performance in demanding applications. The tin plating not only prevents corrosion but also aids in reducing contact resistance over time. Visual inspection through the window is a crucial quality control step, preventing incomplete terminations that could lead to failure. The 45-degree tongue offers installation flexibility, which is particularly beneficial in panel building and electrical enclosure applications where space can be a constraint. Compliance with UL, CSA, Telcordia NEBS Level 3, and ABS approvals signifies its suitability for a wide range of industrial and telecommunications environments. Ensure proper crimping with Panduit tools and dies (P24) for optimal results and to meet all listed certifications.
  • Two-hole standard barrel compression lug for #6 AWG stranded copper conductors
  • Tin-plated copper construction for corrosion resistance and conductivity
  • Inspection window for visual confirmation of full conductor insertion
  • 45-degree angled tongue for installation flexibility
  • UL Listed and CSA Certified to 35kV, temperature rated to 90°C

Specifications

Barrel Type*
Standard
Color
Blue
Connection Type
Barrel Lug with Window
Material
Metal
Mounting
7/8 In.
Series
LCD
Size
#6 AWG
Standard
CSA certified C22.2 No. 65-13, UL Listed to 486A-486B File #E52164, NEBS Level 3
Stud Size
5/16 In.
Type
Compression Lug
Package Dimensions (L x W x H)
7.7 IN x 3.5 IN x 3.3 IN
Package Weight (Imperial)
1.6 lbs
Mechanical Crimp Tool with 5/8 Inch Nose Die APPLICATIONS: Designed for use with wide range and H-Tap connectors. It has fiberglass handles and comes with "O" and "D" Nose Dies. It has an output of 4.5 tons.

OD581

Mechanical Crimp Tool with 5/8 Inch Nose Die APPLICATIONS: Designed for use with wide range and H-Tap connectors. It has fiberglass handles and comes with "O" and "D" Nose Dies. It has an output of 4.5 tons.
O' Die for OD581 Mechanical Crimp Tool

OJB

O' Die for OD581 Mechanical Crimp Tool
U-Type Compression Die - Pink 1/0 AWG Copper - 2 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.

CD6A

U-Type Compression Die - Pink 1/0 AWG Copper - 2 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
U-Type Compression Die - Black 2/0 AWG Copper U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.

CD7

U-Type Compression Die - Black 2/0 AWG Copper U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.
Non-Insulated Parallel Splice Connector For Wire Range 6 For Circular Mil Range 20,800-33,100 Length .5 Diameter .365,Metallic

E6-PS-D

Non-Insulated Parallel Splice Connector For Wire Range 6 For Circular Mil Range 20,800-33,100 Length .5 Diameter .365,Metallic
Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

AS-K1-H6

Power Distribution Block (1) 2/0-14 AWG Primary (6) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.
PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray

A1212SC-G

PVC Coated Junction Box, 12 Inch X 12 Inch X 6 Inch, 14 Gauge, Gray
Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray

E989NNJ-5-HD

Molded Junction Box, Length 4 Inch x Width 4 Inch x Depth 2 Inch, Material Polycarbonate, Color Gray
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705010R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.
Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

1SNK705030R0000

Combine high performance with compact dimensions: - 1000 V AC / DC IEC 600 V UL, - Opt for the best marking visibility thanks to the up-front, flat marker zone, which lets you mark up to eight digits or increase the font size.

How to Install Copper Compression Connectors

This guide provides step-by-step instructions for installing copper compression connectors, ensuring secure and reliable electrical connections.

Estimated time: 30m

Tools needed:

Wire strippers, Crimping tool, Multimeter

Supplies needed:

Copper compression connectors, Wire

  1. Select the correct connector

    Choose a connector that matches the wire size and material. Ensure you do not use a copper connector on aluminum wire.

  2. Strip the wire

    Use wire strippers to remove insulation from the wire to the length specified in the tool chart. Avoid nicking or damaging the conductor strands.

  3. Insert the wire into the connector

    Insert the stripped end of the wire into the connector until it reaches the stop. Ensure a snug fit.

  4. Crimp the connector

    Place the connector in the crimping tool and crimp it according to the markings on the connector. Start crimping near the tongue end and work towards the wire end.

  5. Inspect the crimp

    After crimping, check the connector for sharp edges, flash, or burrs and remove any imperfections to ensure a safe connection.

Frequently Asked Questions about Panduit

What environmental ratings do Panduit products have?

Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.

What certifications and standards do Panduit products comply with?

Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.

What industries and applications are Panduit products used for?

Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.

What are the main product lines offered by Panduit?

Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.

What are the key features of Panduit products?

Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.

What is Panduit's warranty policy?

Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.

What technical support does Panduit offer?

Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.

What accessories are available for Panduit products?

Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.

How are Panduit products typically installed?

Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.