Authorized NSI Industries Distributor
NSI Industries WWC-T-CJ - The Easy-Twist WWC-T-CJ 100-Count Small Jar of Tan Winged Wire Connectors are designed for use on copper wires in the 22-10 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.
More images

NSI Industries WWC-T-CJ The Easy-Twist WWC-T-CJ 100-Count Small Jar of Tan Winged Wire Connectors are designed…

UPC: 662381142337

Documents & Media
Installation Instructions

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

Connecting wires is faster and easier than ever with the professional performance features of Easy-Twist wire connectors from NSI. These connectors feature a specialized design to install in half the time of a typical wire connector, saving you time and energy. The conical screw shape grips in fewer twists and the outside of the connector is textured with easy-grip ribs for comfortable twisting. The expert team at NSI designed these connectors with key convenience and performance features for electrical industry professionals, including ergonomic swept-back wings that provide a larger surface for exerting torque and a deep-skirt entry that protects against flashover or shorts. Our zinc-plated square spring will form a secure grip on your wires without pre-twisting and can even grip on a single conductor for increased safety. Designed for use on copper wires in size range of 22-10 AWG (minimum 3 #22, maximum 4 #12), maximum temperature of 105ËšC (221ËšF) and maximum voltage of 600V building wires, 1000V in fixtures or signs. Experience the advantage for yourself to see how easy connecting wires can be.
  • Conical Spring The fixed zinc-plated square spring has a precise conical shape that grips in fewer turns and can dead end a single wire
  • Ergonomic Grip Entire connector features a ribbed texture for easier twisting and a more secure gripping surface to increase your productivity
  • Swept-Back Wings NSI connectors have longer wings than the competition with a swept-back design that provide a larger surface for comfortable and fast twisting
  • Compact Design Easy to install in tight areas; the extra-thick cap, deep-skirt entry and threaded funnel make these connectors more reliable and protect against flashover and shorts
  • Labor Saving Save time and effort with professional-quality connectors that install in half the time of a typical wire connector and don’t require pre-twisting of wires

Specifications

Application
Splicing Wire
Color
Tan
Conductor Range
22-8 AWG
Environmental Conditions
105 C
Finish
Thermoplastic
Housing Material
Thermoplastic
Material
Thermoplastic
Number of Conductors
1
Size
H=1.14 - W=.720 - ID=.283
Special Features
Winged Tan Wire Connector - 100 Pcs Jar
Standard
UL 486C
Temperature Rating
105 C
Temperature Rating, Maximum
221 F
Temperature Rating, Maximum
105 C
Temperature Rating, Minimum
221 F
Temperature Rating, Minimum
105 C
Type
Winged Wire Connectors
Voltage Rating
600 V
Warranty
1 Year
Wire Type
CU Wire Only
Package Dimensions (L x W x H)
0.72 IN x 0.72 IN x 1.142 IN
Package Dimensions (L x W x H)
18.288 mm x 18.288 mm x 2.9007 cm
Package Weight (Imperial)
0.494 L
Package Weight (Metric)
0.224 kg
The Easy-Twist WWC-T-B 500-Count Bag of Tan Winged Wire Connectors are designed for use on copper wires in the 22-10 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.

WWC-T-B

The Easy-Twist WWC-T-B 500-Count Bag of Tan Winged Wire Connectors are designed for use on copper wires in the 22-10 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.
Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, One-Hole NEMA Pad, 1/0 Stranded AL9CU, 3/8 inch Bolt Hole, 3-1/8 inch long, Pad 7/8 inch wide x 1-5/16 inch long. Barrel Bore 1-5/16 inch Depth. Dies TU, 52, BG, 243, 5/8. Oxide Inhibitor. Tan Cap.

AL 1/0-38 TN

Tin-Plated Aluminum Compression Lug for Aluminum and Copper Terminations, One-Hole NEMA Pad, 1/0 Stranded AL9CU, 3/8 inch Bolt Hole, 3-1/8 inch long, Pad 7/8 inch wide x 1-5/16 inch long. Barrel Bore 1-5/16 inch Depth. Dies TU, 52, BG, 243, 5/8. Oxide Inhibitor. Tan Cap.
Locking Fork Terminal, vinyl insulated, funnel entry, plastic insulation crimp, 12- 10 AWG wire range, #10 stud size.

PV10-10LFB-2K

Locking Fork Terminal, vinyl insulated, funnel entry, plastic insulation crimp, 12- 10 AWG wire range, #10 stud size.
Rectangular Power Connectors, Housing, Plug, Wire-to-Board / Wire-to-Panel / Wire-to-Wire, 6 Position, 4.2 mm [.165 in] Centerline, AMP MR

1-640520-0

Rectangular Power Connectors, Housing, Plug, Wire-to-Board / Wire-to-Panel / Wire-to-Wire, 6 Position, 4.2 mm [.165 in] Centerline, AMP MR
The Polaris PL250-6 Uninsulated Multi-Tap Connector features 6 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy and plated for corrosion resistance. Each pass-through port features a hex screw used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

PL250-6

The Polaris PL250-6 Uninsulated Multi-Tap Connector features 6 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy and plated for corrosion resistance. Each pass-through port features a hex screw used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPL250-8 Multi-Tap Single Side Entry Connector features 8 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPL250-8

The Polaris IPL250-8 Multi-Tap Single Side Entry Connector features 8 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPL350-5 Multi-Tap Single Side Entry Connector features 5 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPL350-5

The Polaris IPL350-5 Multi-Tap Single Side Entry Connector features 5 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPL250-5 Multi-Tap Single Side Entry Connector features 5 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPL250-5

The Polaris IPL250-5 Multi-Tap Single Side Entry Connector features 5 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

How to Install the WWC-T-CJ Controller

This guide provides step-by-step instructions for installing and configuring the WWC-T-CJ Controller, ensuring proper wiring and setup.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Wire connectors

  1. Mount the controller

    Secure the WWC-T-CJ controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.

  2. Connect the wiring

    Strip the ends of the wires to be connected to the controller. Use the appropriate wire connectors to securely attach the wires to the corresponding terminals on the controller.

  3. Verify connections

    Use a multimeter to check the continuity of the connections. Ensure that all connections are secure and that there are no shorts before powering on the controller.

  4. Power on the controller

    Once all connections are verified, power on the WWC-T-CJ controller and observe the initial status indicators to ensure it is functioning correctly.

  5. Configure settings

    Access the configuration menu of the controller using the designated interface. Set the parameters according to your application requirements.

  6. Calibrate the controller

    Follow the calibration procedure outlined in the user manual to ensure the controller operates within the desired specifications.

Frequently Asked Questions about NSI Industries

How are Tork products typically installed?

Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.

What environmental ratings do Tork products have?

Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.

What communication protocols do Tork products support?

Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.

What are the key features of Tork products?

Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.

What are the main product lines offered by Tork?

Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.

What technical support does Tork offer?

Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.

What industries and applications are Tork products used for?

Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.

What certifications and standards do Tork products comply with?

Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.

How are Remke products typically installed?

Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.

What accessories are available for Remke products?

Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.