Contact for Pricing
Overview
- Constructed from high-conductivity copper tubing for superior electrical performance.
- Features a peep hole for easy visual inspection of cable termination.
- Tin-plated for enhanced corrosion resistance and low contact resistance.
- 2-hole configuration with 3/8" bolt size and 1.75" mounting hole spacing.
- Rated for 600V and 35KV maximum (when properly installed); cULus 486A/B Listed.
Specifications
Application | Terminate, Splice, Tap Power Connectors |
Cable Size | # 2 AWG (STR) |
Color | Brown |
Environmental Conditions | 90 C |
Finish | Tin Plated |
Material | Copper |
Mounting | 3/8 Mounting Holes IN |
Number Of Holes | 2 |
Size | L=4.25 - W=.810 - OD=.420 - ID=.310 IN |
Special Features | # 2 AWG (STR) - 3/8 Mounting Holes - 1 3/4 Hole Spacing |
Standard | UL486A/B, UL467 (8 AWG -3/0 AWG) |
Stud Size | 3/8 IN |
Type | Long Barrel - Two Hole With Peep Hole |
Voltage Rating | 600 V |
Warranty | 1 Year |
Package Dimensions (L x W x H) | 4.25 IN x 0.81 IN x 0.42 IN |
Package Dimensions (L x W x H) | 10.795 cm x 20.574 mm x 10.668 mm |
Package Weight (Imperial) | 4.500 L |
Package Weight (Metric) | 2.041 kg |
L256
1 Hole Long Barrel Copper Compression Lug 2 AWG - 5/16" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .
54807
Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #2 AWG, Length 1.88 Inches, Diameter 0.43 Inches, Tin Plated, Die Code 33, Die Color Code Brown
L4NP
2 Hole Long Barrel Copper Compression Lug with Peep Hole 4 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.
L614P
1 Hole Long Barrel Copper Compression Lug with Peep Hole 6 AWG - 1/4" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .L2NP
2 Hole Long Barrel Copper Compression Lug with Peep Hole 2 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.
WRD289
Dual Rated Wide Range Tap-Connectors 1-4/0 AWG Dual rated wide range tap connectors are used for combinations of aluminum and aluminum-cooper conductors. Standard compression tools and dies install in all sizes. They have formable ribs to provide broader contact area. Fold-in tabs provide positive tab interlock as tool closes. Made from high strength aluminum alloy. All connectors are reversible. Rated 600 Volts.
WRD149
Dual Rated Wide Range Tap-Connectors 6-2 AWG Dual rated wide range tap connectors are used for combinations of aluminum and aluminum-cooper conductors. Standard compression tools and dies install in all sizes. They have formable ribs to provide broader contact area. Fold-in tabs provide positive tab interlock as tool closes. Made from high strength aluminum alloy. All connectors are reversible. Rated 600 Volts.How to Install and Crimp NSI Copper Compression Connectors
Install NSI copper compression connectors by selecting the correct lug or splice, preparing the conductor, and crimping with the approved tool and die set. Follow the strip-length and crimp-location guidance to ensure a secure, code-compliant connection.
Tools needed:
Wire brush, Approved crimp tool (NSI N12ID or NSI N1240), Compatible approved dies or mechanical crimp tool (as applicable)
Supplies needed:
Correctly sized NSI copper compression lug or splice connector, Copper conductor, Wire insulation to be stripped from the conductor
- Select the correct connector and tool
Choose the NSI lug or splice that matches the conductor size and application. Verify the connector series, strip length, and approved crimp tool/die combination before starting. Warning: Use only approved tools and dies for the connector series and conductor type.
- Strip and clean the conductor
Carefully strip the insulation from the conductor without nicking the strands. Strip enough length so the conductor will fully insert into the barrel and fill it completely. Wire brush the stripped portion to remove oxide films, and keep the conductor clean before insertion.
- Insert the conductor fully into the barrel
Insert the cleaned stripped conductor completely into the connector barrel. Verify that the conductor is fully seated and that no strands are outside the barrel before crimping.
- Crimp the connector at the marked locations
Crimp the connector using the approved NSI tool and the correct die set for the connector series. Follow the barrel markings for suggested crimp locations. For long-barrel lugs and splices, make twice as many crimps as indicated in the table. Warning: Ensure the tool and die match the connector series to avoid an improper connection.
- Verify the finished connection
Inspect the completed crimp to confirm the connector is secure and the conductor remains fully seated. Check that the correct number of crimps was made and that the connection matches the specified strip length and connector size.
Frequently Asked Questions about NSI Industries
How are Tork products typically installed?
Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.
What environmental ratings do Tork products have?
Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.
What communication protocols do Tork products support?
Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.
What are the key features of Tork products?
Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.
What are the main product lines offered by Tork?
Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.
What technical support does Tork offer?
Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.
What industries and applications are Tork products used for?
Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.
What certifications and standards do Tork products comply with?
Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.
How are Remke products typically installed?
Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.
What accessories are available for Remke products?
Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.