NSI Industries ISR-2/0 - Polaris 2/0-14 Awg Insulated In-Line Splice
NSI Industries

ISR-2/0

UPC: 662381373496

Contact for Pricing

Minimum Qty: 4

Multiplier: 4

*Contact for lower quantities*

Overview

The NSi Industries ISR-2/0 is a dual-rated splicer/reducer connector designed for reliable in-line wire connections in industrial applications. This component is engineered with a high dielectric strength plastisol insulation, molded for a precise fit, ensuring secure and insulated connections. The ISR-2/0 features removable access plugs over the hex screw for convenient installation and maintenance. Its construction offers excellent abrasion and chemical resistance, along with UV resistance, making it suitable for diverse environmental conditions. Crucially, this connector will not support combustion, enhancing safety in electrical installations. It is UL Listed 486B for dry locations and rated for a cold temperature of -45 °C, with a voltage rating of 600V and a temperature rating of 90 °C. The ISR-2/0 is dual-rated for use with both copper and aluminum cables, accommodating wire ranges from 250 MCM down to -6 AWG. It is not intended for use with extra-flexible cables. The connector has a length of 4.000 inches, a width of 1.190 inches, and a height of 1.900 inches. The maximum torque value is 360 in./lbs., requiring a 5/16 inch hex/wrench size. Each standard carton contains 4 units. Trust NSi Industries for quality components that meet stringent performance and durability standards in manufacturing, automation, and other industrial settings.
  • Suitable for connecting two wires in-line.
  • Insulated with high dielectric strength plastisol and molded for precise fit.
  • Supplied with removable access plugs over the hex screw.
  • Abrasion and chemical resistant; UV resistant.
  • UL Listed 486B Wire Connector (Dry location), 600V, 90°C, -45°C rated.
Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.

PH10-38R-E

Heat Shrink Ring Terminal 12 10 AWG, 3/8" stud size.
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD350-6

The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The ABB Installation Products 54965BE10PH is a premium industrial component designed for robust and efficient electrical installations. Engineered to meet stringent industry standards, this product ensures reliable performance in demanding environments. Its durable construction and precise engineering make it ideal for a wide range of industrial applications, including power distribution, automation, and control systems. Trusted by professionals worldwide, ABB's commitment to quality and innovation is evident in this product, delivering dependable solutions for your electrical needs.

54965BE10PH

The ABB Installation Products 54965BE10PH is a premium industrial component designed for robust and efficient electrical installations. Engineered to meet stringent industry standards, this product ensures reliable performance in demanding environments. Its durable construction and precise engineering make it ideal for a wide range of industrial applications, including power distribution, automation, and control systems. Trusted by professionals worldwide, ABB's commitment to quality and innovation is evident in this product, delivering dependable solutions for your electrical needs.
Rectangular Connector Housings, Wire-to-Board / Wire-to-Wire / Wire-to-Panel, 25 Position, .2 in [5.08 mm] Centerline, 5 Row, Polyester, AMP Metrimate

211150-1

Rectangular Connector Housings, Wire-to-Board / Wire-to-Wire / Wire-to-Panel, 25 Position, .2 in [5.08 mm] Centerline, 5 Row, Polyester, AMP Metrimate

Frequently Asked Questions about NSI Industries

How are Tork products typically installed?

Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.

What environmental ratings do Tork products have?

Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.

What communication protocols do Tork products support?

Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.

What are the key features of Tork products?

Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.

What are the main product lines offered by Tork?

Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.

What technical support does Tork offer?

Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.

What industries and applications are Tork products used for?

Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.

What certifications and standards do Tork products comply with?

Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.

How are Remke products typically installed?

Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.

What accessories are available for Remke products?

Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.