Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*
Overview
- 6-port, single-sided entry connector for direct burial and temporary submersion.
- Accommodates wire sizes from 350 MCM to 12 AWG.
- Constructed from high-strength 6061-T6 aluminum alloy with high-dielectric strength rubber insulation.
- Rated 600V, 90°C operating temperature, and -45°C cold temperature rating.
- Meets ANSI C119.4 Class A and UL486D specifications for wet/damp locations and direct burial.
Specifications
Aluminum Conductor Max AMP | 770 Amp |
Aluminum Conductor Note | Dual Rated for use with copper and or aluminum cables. Not for use with fine-stranded, flexible cables |
Application | Wire Termination |
Color | Black |
Copper Conductor Max | 985 Amp |
Environmental Conditions | 90 C |
Finish | EPDM Rubber Insulated |
Housing Material | Aluminum |
Housing Material | Aluminium |
Material | Aluminum |
Number Of Conductors | 6 |
Number Of Poles | 1 |
Size | L=7.180 - W=4.190 - H=3.060 IN |
Special Features | (6) 350 MCM-12 AWG - Dual Rated |
Standard | ANSI C119.4, C119.1 |
Temperature Rating | 90 C |
Temperature Rating, Maximum | 194 F |
Temperature Rating, Maximum | 90 C |
Temperature Rating, Minimum | 194 F |
Temperature Rating, Minimum | 90 C |
Type | Submersible Pedestal Connectors |
Voltage Rating | 600 V |
Warranty | 1 Year |
Wire Size | 350 MCM-12 AWG |
Wire Type | Class B & C |
Wire/Cable Class | Class B, Class C |
Package Dimensions (L x W x H) | 7.18 IN x 4.19 IN x 3.06 IN |
Package Dimensions (L x W x H) | 18.2372 cm x 10.6426 cm x 7.7724 cm |
Package Weight (Imperial) | 1.078 L |
Package Weight (Metric) | 0.489 kg |
ISPB350-4
The Polaris ISPB350-4 Multi-Tap Direct Burial Single-Sided Entry Connector features 4 ports sized for 350 MCM - 12 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
61905A
Bi-Metal Pin Connectors with Insulating Cover, 600V, Aluminum Cable Size 8 AWG to Copper Pigtail Wire Size 10 AWG, Tin Plated, Die Code 24, Die Color Code Blue
53884-1
Rectangular Power Connectors, Housing, Receptacle / Plug, Wire-to-Wire, 1 Position, Wire & Cable, UL 94V-2, Power, Panel Mount
IPLDS500-4
The Polaris IPLDS500-4 Multi-Tap Dual-Sided Entry Connector features 4 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.
IPLDS350-4
The Polaris IPLDS350-4 Multi-Tap Dual-Sided Entry Connector features 4 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.
P16-250-3V-P
16-14 AWG Vinyl Insulated Female Piggybacks - 40 Count Vinyl Insulated Piggybacks are made of electro tin plated copper. 600V, 105 degrees C. FEATURES: STYLE: Female Piggybacks MATERIAL: Vinyl QUANTITY: 40 WIRE SIZE: 16-14 STUD SIZE: 0.250
N1240
12-Ton Hydraulic Crimping Tool 750 MCM - 8 AWG APPLICATIONS: Accepts KC12, KA12 and KD12 crimping dies as well as industry "U" style dies. New head design results in lower weight and improved durability- tested to 50,000 crimp cycles. Two-speed pump to reduce cycle time. Ram automatically retracts when crimp cycle is complete. Crimping heads rotate 350 degrees. Smaller and lighter than most competitive tools. Includes carrying case. 8 AWG to 750 kcmil copper and aluminum color-coded lugs and splices. UL and cUL Listed.Frequently Asked Questions
What specific product is ISPB350-6?
ISPB350-6 is a product code in the NSi Industries Polaris line, specifically listed as 'PED6-350SS-DB'.
Are there multiple variations of this product?
Yes, there are related products in the same series, including ISPB350-3 and ISPB350-4, which follow a similar naming convention.
How to Install the ISPB350-6 Connector
This guide provides step-by-step instructions for the installation and wiring of the ISPB350-6 connector, ensuring a secure and reliable connection.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, Dielectric silicone grease
- Prepare the conductor
Wipe any contaminants off the conductor's insulation and mark it at 1-1/8" using the specified strip length as a reference.
- Strip the insulation
Remove the insulation from the conductor up to the 1-1/8" mark without scoring or nicking the bare wire. For larger wire sizes, bevel the edge of the insulation.
- Insert the conductor sleeve
Remove the conductor sleeve from the connector, cut it to the appropriate size if necessary, and reinsert it into the conductor port.
- Loosen the set screw
Remove the set screw access plug and loosen the set screw to allow for conductor insertion.
- Insert the conductor
Lubricate the exterior of the conductor insulation with dielectric silicone grease, then insert the conductor until the reference mark is even with the end of the port.
- Tighten the screws
Tighten the pressure screws to the recommended torque specified in the documentation.
- Replace the access plug
Replace the set screw access plug to secure the connection.
Frequently Asked Questions about NSI Industries
How are Tork products typically installed?
Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.
What environmental ratings do Tork products have?
Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.
What communication protocols do Tork products support?
Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.
What are the key features of Tork products?
Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.
What are the main product lines offered by Tork?
Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.
What technical support does Tork offer?
Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.
What industries and applications are Tork products used for?
Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.
What certifications and standards do Tork products comply with?
Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.
How are Remke products typically installed?
Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.
What accessories are available for Remke products?
Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.