Authorized NSI Industries Distributor
NSI Industries ISPB2/0-2 - The Polaris ISPB2/0-2 Multi-Tap Direct Burial Single-Sided Entry Connector features 2 ports sized for 2/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL 486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.

NSI Industries ISPB2/0-2 The Polaris ISPB2/0-2 Multi-Tap Direct Burial Single-Sided Entry Connector features 2…

UPC: 662381787835

Documents & Media
Brochure

Contact for Pricing

Minimum Qty: 3

Multiplier: 3

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The NSI Industries Polaris ISPB2/0-2 Multi-Tap Direct Burial Single-Sided Entry Connector is a pre-insulated, submersible wire connector engineered for secure, long-term connections in wet, damp, or direct burial environments. Designed for 2/0 to 14 AWG copper or aluminum conductors, this 2-port connector features a high-strength 6061-T6 aluminum alloy body wrapped in a 125-mil high-dielectric strength rubber insulation, providing abrasion, chemical, and UV resistance. The radial-tipped set screws are pre-loaded with oxide inhibitor and secured via removable access plugs over hex screws, eliminating the need for tape, compounds, or heat shrink. Installation requires only a hex key and torque wrench, with a maximum torque of 120 in-lbs, as specified in the manufacturer's torque chart. Rated for 600V and 90°C operation, the ISPB2/0-2 meets ANSI C119.1 and UL 486D standards for temporary submersion up to 6 feet and direct burial applications. Its ergonomic design ensures a comfortable grip, while the dual-rated compatibility with both copper and aluminum cables (max 195A for copper, 150A for aluminum) makes it versatile for field use. The connector is reusable and designed for one conductor per port, with a cold temperature rating of -45°C. Ideal for temporary submersal, damp locations, or direct burial splicing, the ISPB2/0-2 simplifies field installations by reducing labor and material costs. Dimensions: 2.100" H x 1.930" L x 2.650" W. Hex wrench size: 3/16".
  • One-Side Wire Entry: Form secure connections between 2 conductors quickly using the single-side entry ports sized for wires between 2/0 and 14 AWG
  • Direct Burial Applications: High-strength aluminum alloy body and rubber insulation with a nominal thickness of 125 mils built for temporary submersal or direct burial applications
  • Ergonomic Design: The plastisol insulation features rounded corners for a comfortable grip and is UV, abrasion and chemical-resistant for durable performance
  • Pre-filled Oxide Inhibitor: All 2 single-side entry ports are covered by removable plugs and pre-filled with an oxide inhibitor gel to prevent corrosion or contamination
  • Professional Performance: The durable layer of insulation on each Polaris connector is UV, abrasion and chemical-resistant for reliable performance

Specifications

Aluminum Conductor Max AMP
150 Amp
Aluminum Conductor Note
Dual Rated for use with copper and or aluminum cables. Not for use with fine-stranded, flexible cables
Application
Wire Termination
Color
Black
Connection Type
Set Screw
Copper Conductor Max
195 Amp
Current Rating
195 A (Copper), 150 A (Aluminum)
Environmental Conditions
90 C
Finish
EPDM Rubber Insulated
Material
Aluminum
Material
Aluminum Alloy, Rubber
Mounting Type
Direct Burial
Number Of Conductors
2
Number Of Poles
1
Poles
2
Series
Polaris ISPB2/0-2
Size
2/0 - 14 AWG
Size
L=1.93 - W=2.65 - H=2.10 IN
Special Features
(2) 2/0-14 AWG - Dual Rated
Standard
ANSI C119.4, C119.1, UL486D UL 486D
Standard
ANSI C119.4, C119.1, UL486D
Temperature Rating
90 C
Type
Submersible Pedestal Connectors
Voltage Rating
600 V
Warranty
1 Year
Wire Size
2/0-14 AWG
Wire Type
Class B & C
Wire/Cable Class
Class B, Class C
Package Dimensions (L x W x H)
1.93 IN x 2.65 IN x 2.1 IN
Package Dimensions (L x W x H)
4.9022 cm x 6.731 cm x 5.334 cm
Package Weight (Imperial)
0.204 L
Package Weight (Metric)
0.093 kg
The Polaris ISPB2/0-2B Multi-Tap Direct Burial Single-Sided Entry Connector features 2 ports sized for 2/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL 486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.

ISPB2/0-2B

The Polaris ISPB2/0-2B Multi-Tap Direct Burial Single-Sided Entry Connector features 2 ports sized for 2/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of high-dielectric strength rubber insulation. Each single-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the radial-tipped set screws. Rated for temporary submersion, wet or damp locations and direct burial applications. Installs with a hex key and torque wrench, without any tape or additional supplies. Meets or exceeds UL 486D and ANSI C119.1 specifications for use in wet or damp locations and designed for use in a wide range of temporary submersal or burial splicing applications.
Space Cap, Conduit Size 3/4 Inch, Length 2-15/32 Inches, Width 1-47/64 Inch, Material Plastic

BT 502

Space Cap, Conduit Size 3/4 Inch, Length 2-15/32 Inches, Width 1-47/64 Inch, Material Plastic
The Polaris IPLD350-6C Multi-Tap Dual-Sided Entry Vision Tap Connector features 6 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLD350-6C

The Polaris IPLD350-6C Multi-Tap Dual-Sided Entry Vision Tap Connector features 6 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPL3/0-3C Multi-Tap Single Side Entry Vision Tap Connector features 3 ports sized for 3/0 - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPL3/0-3C

The Polaris IPL3/0-3C Multi-Tap Single Side Entry Vision Tap Connector features 3 ports sized for 3/0 - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPLD3/0-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 3/0 - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLD3/0-4C

The Polaris IPLD3/0-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 3/0 - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPLD350-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLD350-4C

The Polaris IPLD350-4C Multi-Tap Dual-Sided Entry Vision Tap Connector features 4 ports sized for 350 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPLD250-6C Multi-Tap Dual-Sided Entry Vision Tap Connector features 6 ports sized for 250 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLD250-6C

The Polaris IPLD250-6C Multi-Tap Dual-Sided Entry Vision Tap Connector features 6 ports sized for 250 MCM - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Polaris IPLD3/0-3C Multi-Tap Dual-Sided Entry Vision Tap Connector features 3 ports sized for 3/0 - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLD3/0-3C

The Polaris IPLD3/0-3C Multi-Tap Dual-Sided Entry Vision Tap Connector features 3 ports sized for 3/0 - 6 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Frequently Asked Questions

What is the temperature rating of the connectors?

The connectors have a temperature rating of 90 °C.

What is the maximum voltage for these connectors?

The maximum voltage for the connectors is 600V, with a maximum of 2000V per UL486B.

Are the connectors compatible with copper conductors?

Yes, the connectors are designed for use with both copper and aluminum conductors.

What are the safety ratings for these connectors?

The connectors are UL 486A/B listed, ensuring safety and compliance.

What materials are the connectors made from?

The connectors are made from 6061T-6 aluminum alloy and are electro-tin plated.

What is the wire range for the connectors?

The wire range varies by connector type, with options from 2 AWG to 1000 MCM.

What torque value is required for installation?

Torque values for installation range from 50 to 550 in/lbs, depending on the connector.

What is the installation requirement for these connectors?

Connectors must be installed using the specified torque values and appropriate mounting hardware.

What is the standard packaging quantity for connectors?

The standard packaging quantity varies, typically ranging from 10 to 100 connectors per carton.

Can these connectors be reused?

Yes, the connectors are designed to be versatile and reusable.

Frequently Asked Questions about NSI Industries

How are Tork products typically installed?

Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.

What environmental ratings do Tork products have?

Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.

What communication protocols do Tork products support?

Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.

What are the key features of Tork products?

Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.

What are the main product lines offered by Tork?

Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.

What technical support does Tork offer?

Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.

What industries and applications are Tork products used for?

Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.

What certifications and standards do Tork products comply with?

Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.

How are Remke products typically installed?

Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.

What accessories are available for Remke products?

Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.