NSI Industries IPLDS750-6 - The Polaris IPLDS750-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 750 MCM - 1/0 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.
NSI Industries

IPLDS750-6

UPC: 662381951731

Documents & Media
BrochureInstallation Instructions

Contact for Pricing

Overview

The Polaris IPLDS750-6 6-Port Dual-Sided Stacked Connector provides the simplest solution for forming a secure connection between up to six conductors in tight applications including cable trays, panel boards, ducts, raceways or troughs. Each of the stacked wire ports, sized for 750 MCM - 1/0 AWG wires and rated for 600V, comes pre-loaded with an oxide inhibitor. Pre-insulated connectors install faster than traditional uninsulated connector options using just a hex key and torque wrench. The aluminum alloy body is wrapped in high-dielectric strength plastisol insulation, which is ergonomically molded to offer a comfortable grip, in addition to being resistant to abrasion, chemicals and UV rays. All-in-one design saves time and supplies on each job by eliminating the need for cover and taping; simply brush the conductors clean, strip back their insulation, insert one conductor into each port and secure the covered pressure screws. The IPLDS750-6 connector is rated for a 75 degrees Celsius operating temperature and dual rated for use with copper and/or aluminum cables, up to max AMP ratings of 475 and 385 respectively. Polaris pre-insulated connectors are available in a range of port numbers and configurations to fit the needs of any job, including UL-listed parallel configurations. Polaris: the original pre-insulated connector and still the brand most asked for by name.
  • Dual-Sided Wire Entry: Form secure connections between 6 conductors quickly using the double-side entry ports sized for wires between 750 MCM and 1/0 AWG
  • Stacked Connector: Stacked wires holes on one side of the connector excel at splicing large wires in tight-fitting spaces like panels or wire ways.
  • Ergonomic Design: Rounded corners and a smooth exterior finish over the abrasion-resistant plastisol insulation make Polaris connectors comfortable to grip
  • Removable Plugs: Each port and set screw comes with a secure plug to prevent debris from entering the insulated connector
  • Pre-filled Oxide Inhibitor: All 6 dual-sided entry (DSE) ports come pre-filled with an oxide inhibitor gel to prevent corrosion and provide low-contact resistance

Specifications

Aluminum Conductor Max AMP
1395 Amp
Aluminum Conductor Note
Dual Rated for use with copper and or aluminum cables. Not for use with fine-stranded or flexible cables, Parallel Rated to provide safety and NEC complaince when installing parallel runs.
Application
Wire Termination
Color
Black
Copper Conductor Max
1767 Amp
Environmental Conditions
90 C
Finish
Plastisol Insulated
Housing Material
Aluminum
Housing Material
Aluminium
Material
Aluminum
Number Of Conductors
6
Number Of Poles
1
Size
L=4.950 - W=4.970 - H=4.920 IN
Special Features
(6) 750-250 MCM - Dual Rated
Standard
UL 486A/B
Temperature Rating
90 C
Temperature Rating, Maximum
194 F
Temperature Rating, Maximum
90 C
Temperature Rating, Minimum
194 F
Temperature Rating, Minimum
90 C
Type
Stacked Double Sided Entry
Voltage Rating
600 V
Warranty
1 Year
Wire Size
750-250 MCM
Wire Type
Class B & C
Wire/Cable Class
Class B, Class C
Package Dimensions (L x W x H)
4.95 IN x 4.97 IN x 4.92 IN
Package Dimensions (L x W x H)
12.573 cm x 12.6238 cm x 12.4968 cm
Package Weight (Imperial)
3.930 L
Package Weight (Metric)
1.783 kg

Similar Products

IPLDS750-10

Size: L=7.800 - W=4.970 - H=4.920 IN

Special Features: (10) 750-250 MCM - Dual Rated

Number Of Conductors: 10

IPLDS750-12

Size: L=9.230 - W=4.970 - H=4.920 IN

Number Of Conductors: 12

Special Features: (12) 750-250 MCM - Dual Rated

IPLDS750-16

IPLDS750-20

IPLDS750-8

Number Of Conductors: 8

Special Features: (8) 750-250 MCM - Dual Rated

Size: L=6.380 - W=4.970 - H=4.920 IN

IPLDS350-6

Special Features: (6) 350 MCM-6 AWG - Dual Rated

Wire Size: 350 MCM-6 AWG

Size: L=3.600 - W=3.910 - H=3.520 IN

You May Also Be Interested In

The Polaris IPLD750-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 750 - 250 MCM wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLD750-6

The Polaris IPLDS750-8 Multi-Tap Dual-Sided Entry Connector features 8 ports sized for 750 MCM - 1/0 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.

IPLDS750-8

The Polaris IPLDS500-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.

IPLDS500-6

The Polaris IPLDS350-6 Multi-Tap Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.

IPLDS350-6

The Polaris IPLMD750-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 750 - 250 MCM. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD750-6

Frequently Asked Questions

What is the product code for IPLDS750-6?

The product code for IPLDS750-6 is BIBS750-6.

What is the maximum current rating?

The IPLDS750-6 has a maximum current rating of 750 amps.

What safety precautions should be taken?

Always ensure power is off before installation or maintenance to prevent electrical shock.

Frequently Asked Questions about NSI Industries

What technical support does NSi Industries offer?

NSi Industries offers dedicated technical support through their toll-free technical support line at 888.500.4598. They are committed to customer satisfaction and promise to make every reasonable effort to remedy any product or service issues. Additionally, customers can contact their customer service team at 800.321.5847 or email [email protected] for further technical assistance.

What are the key features of NSi Industries products?

NSi Industries products feature exceptional versatility, reliability, and safety across multiple industrial automation categories. Key features include insulation piercing connectors with no wire stripping required, watertight and corrosion-free designs, wide wire range compatibility (from #14 AWG to 750 MCM), and the ability to install on energized conductors. Their product lines like Easy-Tap™ Connectors and TORK® Digital Timers demonstrate advanced capabilities such as turbo spacers, double shear-head bolts, astronomic scheduling, and enhanced switching technologies.

What environmental ratings do NSi Industries products have?

NSi Industries enclosures feature robust environmental ratings, including IEC 60529 IP66 certification, NEMA Type 1, 2, 3, 4, 4X, 12, and 13 ratings, and UL/CSA standards. Their products are designed for both indoor and outdoor applications, with protection against dust, water, corrosion, and extreme temperatures ranging from -40°F to 266°F.

How are NSi Industries products typically installed?

NSi Industries products are typically installed using detailed mechanical and digital wiring diagrams that specify precise connection methods for various voltage configurations (120V, 208V, 240V, 277V, 480V). Installation involves carefully following product-specific wiring schematics, which include clear terminal block connections, ground wire specifications, and phase alignment requirements. Professional electricians and technicians should reference the specific product's wiring diagram to ensure correct installation and electrical compliance.

What industries and applications are NSi Industries products used for?

NSi Industries provides electrical and automation products for diverse industrial applications, including lighting control, electrical enclosures, wire management, connectors, and sensor technologies. Their product lines serve commercial, industrial, and infrastructure markets with solutions for electrical infrastructure, control systems, and safety-critical environments.

What are the main product lines offered by NSi Industries?

NSi Industries offers a comprehensive range of industrial products including TORK® Photocontrols, Polaris™ Lighting Controls, Easy-Twist™ Grounding Solutions, Miniterms, Cable Ties, Connectors, Enclosures, Occupancy Sensors, and Wire Management systems. Their product lines span electrical components, control devices, and industrial automation accessories designed for diverse applications in commercial and industrial settings.

What accessories are available for NSi Industries products?

NSi Industries offers a range of accessories for their product lines, including photocontrol accessories like replacement caps, mounting brackets, and receptacles. Specific accessories include shorting caps, open caps, 3-pin and 7-pin receptacles, and utility mounting brackets for conduit photocontrols. For specialized applications, NSi recommends contacting their customer service team to discuss custom accessory needs.