Hammond Power WAHF1K050A-T6H Active Harmonic Filter 480V 50A 60Hz MDB/TCP type 1;used on 400V

The AHF is designed to reduce total demand distortion (TDD) and total harmonic distortion (THD(V)) to levels less than 5%, correct linear displacement, and balance incoming three-phase current.

The AHF can operate in ambient temperatures from 0°C to 40°C and humidity levels from 0 to 95% non-condensing.

The AHF should be stored in a well-ventilated area protected from weather, moisture, and extreme temperatures, with a storage temperature range of -20°C to 60°C.

The AHF is designed to operate from an input voltage of 480, 240, or 208 VAC, 3-phase, 3-wire plus ground, with a tolerance of +12%, -15%.

The AHF operates with a voltage frequency of 50 or 60 Hz, with a tolerance of ±5 Hz.

The AHF efficiency is no less than 98% at full load, with heat losses not exceeding 2% of the unit's KVAR rating.

The AHF uses electronic current limiting to limit its output to 100% RMS of the system current rating and can operate continuously at this limit.

Yes, additional units can be paralleled if the harmonic correction needed exceeds the maximum current rating of a single AHF, with up to six systems able to be paralleled.

The AHF is provided in a NEMA Type 1 gasketed enclosure with air intake filters. Systems rated 50-200 amps are wall-mountable, while 300 amp systems are floor-mountable.

The AHF has a 6-inch color LCD touch screen for viewing power quality information, system status, operating parameters, and historical data, as well as for performing system functions like Run, Stop, and Set Parameters.

Hammond Power products are certified to UL (Underwriters Laboratories) and CSA (Canadian Standards Association) standards in North America. Our products meet rigorous safety and performance requirements, with many items classified as UL Listed Products or Recognized Components. We also comply with international certifications including China Compulsory Certification (CCC), C-Tick for Australian EMC requirements, and ANCE for Mexico.

Hammond Power provides a standard one-year warranty on all products, covering defects in workmanship and materials. Products will be repaired or replaced free of charge if found defective upon factory inspection. The warranty does not cover damage from improper handling, incorrect application, or faulty installation.

Hammond Power products are engineered for critical industrial and commercial applications across multiple sectors, including petrochemical, mining, construction, renewable energy, e-mobility, power storage, and microgrids. Their comprehensive product range of dry-type transformers, power quality solutions, and magnetic components enables electrical distribution and electrification in diverse industrial environments worldwide.

Hammond Power Solutions offers a comprehensive range of dry-type and liquid-filled transformers for industrial and commercial applications. Their primary product lines include power transformers for renewable energy, e-mobility, data centers, microgrids, and industrial settings. The company provides both standard and custom-designed transformer solutions that are critical to electrical distribution networks across multiple industries.

Hammond Power products feature advanced dry-type and liquid-filled transformers engineered for diverse industrial applications, with capabilities spanning renewable energy, e-mobility, data centers, microgrids, and industrial/commercial sectors. Key features include high-performance electrical steel laminations, windings available in copper or aluminum, advanced insulation systems (VPI or Cast Resin), Basic Impulse Level ranges from 10 kV to 250 kV, and custom design capabilities with over 3,000 unique transformer designs engineered annually.

Hammond Power offers industrial enclosures with comprehensive environmental ratings, including UL/cUL 508A ratings of Type 1, 2, 3, 4, 4X, 12, and 13. Their products meet IEC 60529 IP66 standards, providing robust protection against dust, water ingress, and harsh environmental conditions. Specific ratings vary by product series, with options ranging from indoor Type 1 enclosures to outdoor-rated Type 4X enclosures suitable for challenging industrial environments.

Hammond Power Solutions provides comprehensive technical support through multiple channels. Customers can access technical resources via phone support in Canada, the United States, Mexico, and internationally, with toll-free numbers and regional contact points. Their technical team offers personalized assistance for custom design inquiries, helping customers find standard transformer and power solutions or develop specialized electrical products for various industrial applications.

Hammond Power products support multiple industrial communication protocols, including Modbus RTU, PROFIBUS DP, PROFINET, EtherNet/IP, and CANopen. These protocols enable flexible connectivity across industrial automation platforms, supporting various network topologies and high-speed data transmission for comprehensive industrial control and monitoring applications.

Hammond Power offers a comprehensive range of accessories for industrial electrical components, including HME Series handles with key locking and padlocking options, door stop kits, light kit mounting brackets, and standard hardware like mounting screws and washers. These accessories are designed to enhance functionality and installation flexibility across their product lines.

Hammond Power transformers are typically chassis-mounted using precise mounting hole centers and dimensions specific to each product series. Installation involves selecting the appropriate primary voltage configuration, securing the transformer to a mounting surface using the specified mounting holes, and connecting terminals according to the product's schematic. Most Hammond Power transformers feature multiple terminal options like solder or quick-connect terminals, allowing flexible and straightforward installation in industrial control and power distribution applications.