Hammond Manufacturing 1554D2GY RAL7035 grey polycarb plastic watertight enclosure, 4.7 x 2.6 x 2.4 in, Polycarbonate…

ABS versions are recommended for -20°C to +60°C (-4°F to +140°F). Polycarbonate versions are recommended for -40°C to +110°C (-40°F to +230°F).

Polycarbonate versions meet IP66, IP67, and IP68, as well as NEMA Type 4, 4X, 6, 6P, 12, and 13 ratings.

ABS versions have been tested to and meet IP66 ratings. They are for indoor use only.

The replaceable gasket is made of high-temperature UL listed silicone and is supplied loose inside the enclosure.

Lid screws are M4 stainless steel and are self-captivating. They thread into corrosion-resistant bushings.

ABS versions have a flammability rating of UL94-HB. Polycarbonate versions have a UL94-5VA rating for solid gray, and UL94V-0 for clear and smoked lids.

ABS versions have an impact rating of IK07 per IEC 62262:2021. Polycarbonate versions have an impact rating of IK08 per IEC 62262:2021.

Most models have internal DIN rail mounting tabs. All but the smallest sizes have threaded inserts or standoffs for PC board mounting.

Yes, threaded M3 brass inserts and/or standoffs for #6 self-tapping screws are available for PC board mounting in most sizes.

Enclosures are light gray (RAL 7035). Polycarbonate versions offer gray, clear, or smoked lids. ABS versions are only available in gray.

Hammond Manufacturing provides a standard one-year warranty on all products, covering defects in workmanship and materials. Products will be repaired or replaced free of charge if found defective upon factory inspection. The warranty does not cover damage from improper handling, incorrect application, or faulty installation.

Hammond Manufacturing products are certified to UL (Underwriters Laboratories) and CSA (Canadian Standards Association) standards in North America. Our products meet rigorous safety and performance requirements, with many items classified as UL Listed Products or Recognized Components. We also comply with international certifications including China Compulsory Certification (CCC), C-Tick for Australian EMC requirements, and ANCE for Mexico.

Hammond Manufacturing offers a comprehensive range of industrial enclosures and electrical components, including mild steel, stainless steel, aluminum, and non-metallic enclosures designed for diverse industrial applications. Their product lines cover critical industrial automation needs such as disconnect enclosures, operator interface enclosures, climate control solutions, and general accessories, with products engineered to meet Type 4, 4X, and 12 industrial standards.

Hammond Manufacturing offers enclosures with multiple environmental ratings across their product lines, including UL/cUL 508A ratings of Type 1, 2, 3, 4, 4X, 12, and 13. Their products also comply with IEC 60529 IP66 standards, providing robust protection against dust, water ingress, and harsh environmental conditions. Specific ratings vary by product series, with options ranging from indoor Type 1 enclosures to outdoor-rated Type 4X enclosures suitable for wet, corrosive, and high-temperature environments.

Hammond Manufacturing produces industrial enclosures and electrical components for multiple critical industries, including automation, electrical, audio, power systems, and control applications. Their product lines span mild steel, stainless steel, aluminum, and non-metallic enclosures designed for various NEMA types (Type 4, 4X, 12), as well as transformers, circuit board components, and climate control solutions for industrial and commercial environments.

Hammond Manufacturing offers comprehensive technical support through multiple channels. Customers can access technical references and CAD downloads directly on www.hammondmfg.com, and can contact regional support teams via phone in Canada, the USA, and internationally. For custom design inquiries, their technical team provides personalized assistance, helping customers find standard solutions or develop custom transformer and electrical enclosure designs.

Hammond Manufacturing offers a comprehensive range of industrial enclosures, power supplies, and electronic packaging solutions. Their primary product lines include electrical and electronic enclosures, power transformers, heat sinks, PCI/PCIe card enclosures, and specialized mounting hardware for industrial automation and electronic applications.

Hammond Manufacturing offers a comprehensive range of accessories for their industrial enclosures and electrical components. Key accessories include HME Series handles (swing and lift handles with key locking and padlocking options), door stop kits, and light kit mounting brackets. They also provide standard hardware like screws, washers, and mounting accessories specific to different product lines.

Hammond Manufacturing transformers are typically chassis-mounted using pre-drilled mounting holes and centers specified in their product dimension tables. Most models feature 3/16" diameter mounting holes and precise mounting centers, allowing for direct, secure installation onto equipment chassis or mounting plates. Installation requires aligning the transformer's mounting holes with corresponding mounting points and securing with appropriate fasteners.