
CompleTech CA150C4 offset pattern collinear - Frequency range: 144-156 MHz - Gain: 11 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Offset pattern collinear design for focused signal.
- 11 dBi gain for enhanced signal strength in the 144-156 MHz band.
- Vertical polarization for optimal signal transmission.
- Durable ABS/FG radome with PU foam filling for weather resistance.
- N-/TNC-female connectors and 35-60 mm pole mounting compatibility.
Specifications
Connector | N-/TNC-female |
Frequency | 144-156 MHz |
Gain | 11 dBi |
Length | 6970 mm |
Mounting Diameter | Ø 35-60 |
Mounting Type | 35-60 mm diameter pole |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
Series | CA |
VSWR | <1.5 |
Weight | 4800 g |
Wind Load | 240 N @ 150 km/h |

CA930C4
offset pattern collinear - Frequency range: 880-960 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 100 N
CA350N4
cardioid pattern notch - Frequency range: 336-364 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 144 N
CA230D
offset pattern dipole - Frequency range: 221-239 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 45 N
CA230B4
bidirectional stacked broadside - Frequency range: 221-239 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 180 N
CA400C4
offset pattern collinear - Frequency range: 380-410 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 136 N
CA85C4
offset pattern collinear - Frequency range: 83-88 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 336 NFrequently Asked Questions
What is the polarization of the CA150C4 antenna?
The CA150C4 antenna has vertical polarization.
What is the operating temperature range for the CA150C4 antenna?
The CA150C4 antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the CA150C4 antenna?
The impedance of the CA150C4 antenna is 50 ohm.
What is the gain of the CA150C4 antenna?
The CA150C4 antenna has a gain of 11 dBi.
What are the -3 dB beamwidths for the CA150C4 antenna?
The H -3 dB beamwidth is 182º and the E -3 dB beamwidth is 13º.
What type of connector does the CA150C4 antenna use?
The CA150C4 antenna uses N-female/TNC-female connectors.
What is the VSWR rating for the CA150C4 antenna?
The VSWR for the CA150C4 antenna is less than 1.5.
What materials are used for the radome and radiator of the CA150C4 antenna?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
What is the lightning protection method for the CA150C4 antenna?
The CA150C4 antenna features DC-short circuited lightning protection.
What is the IP rating of the CA150C4 antenna?
The CA150C4 antenna has an IP67 rating.
How to Install the CA150C4 Controller
This guide provides step-by-step instructions for installing and configuring the CA150C4 Controller, ensuring proper setup and connection.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Wire connectors
- Mount the controller
Secure the CA150C4 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the wires to the appropriate terminals on the CA150C4 controller, ensuring a secure fit.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection and prevent moisture ingress.
- Verify connections
Use a multimeter to check the continuity of the connections. Ensure that all connections are secure and functioning properly.
- Power on the controller
Turn on the power supply to the CA150C4 controller and observe the indicator lights to confirm that it is operating correctly.

