
Contact for Pricing
Overview
- 11 dBi gain for extended range in 135-145 MHz band
- Field-adjustable offset pattern with optional beam tilting
- IP67-rated radome with UV-resistant ABS/FG and PU foam filling
- Mounts on 35-60 mm poles with aluminum bracket and stainless steel hardware
- Operates from -40°C to +80°C with 252 N wind load rating
Specifications
Connector | N-/TNC-female |
Frequency | 135-145 MHz |
Gain | 11 dBi |
Length | 7470 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
VSWR | <1.5 |
Weight | 4970 g |
Wind Load | 252 N @ 150 km/h |

CA860C4
offset pattern collinear - Frequency range: 830-890 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 100 NHow to Install the CA140C4 Controller
This guide provides step-by-step instructions for installing and configuring the CA140C4 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Wire connectors
- Mount the controller
Secure the CA140C4 Controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the wires to the appropriate terminals on the CA140C4 Controller, ensuring a secure fit.
- Seal connections
Cover all connectors and cable junctions with self-amalgamating tape to protect against weather elements. Ensure that the tape is applied evenly and securely.
- Verify connections
Use a multimeter to check the voltage and continuity of the connections. Ensure all readings are within the specified range for proper operation.
- Calibrate the controller
Follow the manufacturer's instructions to calibrate the CA140C4 Controller. Adjust settings as necessary to ensure optimal performance.

