
ABB Low Voltage Drives P14494-26 Braking Resistor, 45 OHMS, 1260 WATTS, GCE3 Enclosure, 12W x 10D x 5H in, 13 lbs
Alternate Item Number: 3AUA0000013807
UPC: 662348076194
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 45 Ohm resistance rating
- 1260 Watt power dissipation
- GCE3 enclosure
- Dimensions: 12" W x 10" D x 5" H
- 13 lbs approximate net weight

DCS800-DSL-10M-Cable
Interface cable for communication between the DCF external field supply and the DCS800 drive and/or between DCS800 drives. The cable supports communication for 12 pulse operation and drive-to-drive communication with the SDCS-DSL-4 board. This cable is 33 feet (10 m) long and has ferrule-tipped wires on both ends.
FCAN-01-KIT
CANopen is a higher layer protocol based on the CAN (Control Area Network) serial bus system and the CAL (CAN Application Layer). CANopen assumes that the hardware of the connected device has a CAN transceiver and a CAN controller as specified in ISO 11898. The CANopen Communication Profile, CiA Ds301, includes both cyclic and event driven communication, which makes it possible to reduce the bus load to minimum while still maintaining extremely short reaction times. High communication performance can be achieved at relatively low baud rates, thus reducing EMC problems and cable costs. CANopen device profiles define both direct access to drive parameter and time critical process data communication. The FCAN-01 module fulfills CiA (CAN in Automation) standard DSP 402 (Drives and Motion Control).Frequently Asked Questions
What are the resistance and wattage for P14494-CR-02 for ACS150/355-01U-02A4-2?
For the ACS150/355-01U-02A4-2 drive, the P14494-CR-02 resistor has 200 Ohms and 100 Watts for various duty cycles.
What is the resistance and wattage for P14494-19 for ACS150/355-01U-02A4-2?
For the ACS150/355-01U-02A4-2 drive, the P14494-19 enclosed resistor package has 75 Ohms and 300 Watts for various duty cycles.
What are the resistance and wattage for P14494-CR-01 for ACS150/355-03U-01A2-4?
For the ACS150/355-03U-01A2-4 drive, the P14494-CR-01 resistor has 500 Ohms and 100 Watts for 3-second and 10-second duty cycles.
What is the resistance and wattage for P14494-10 for ACS150/355-03U-01A2-4?
For the ACS150/355-03U-01A2-4 drive, the P14494-10 enclosed resistor package has 350 Ohms and 200 Watts for 3-second and 10-second duty cycles.
What is the resistance and wattage for P14494-CR-06 for ACS250-01U-05A8-1?
For the ACS250-01U-05A8-1 drive, the P14494-CR-06 resistor has 50 Ohms and 100 Watts for a 3-second duty cycle.
What is the resistance and wattage for P14494-24 for ACS250-01U-05A8-1?
For the ACS250-01U-05A8-1 drive, the P14494-24 enclosed resistor package has 45 Ohms and 300 Watts for various duty cycles.
What is the purpose of a braking resistor with variable frequency drives?
Braking resistors are used with variable frequency drives to increase braking torque, enabling faster and more controlled braking. They dissipate regenerated power to prevent bus voltage from exceeding the drive's rated limit.
What is the voltage range for ACS150 and ACS355 single-phase applications?
The ACS150 and ACS355 drives are available for single-phase 200-240V applications, used for stopping duty only.
What is the voltage range for ACS150 and ACS355 three-phase applications?
The ACS150 and ACS355 drives are available for three-phase 200-240V and 380-480V applications, used for stopping duty only.
What is the voltage range for ACS250 single-phase applications?
The ACS250 drives are available for single-phase 100-120V and 200-240V applications, used for stopping duty only.



