
ABB Low Voltage Drives P14494-49 Braking Resistor, 15 OHMS, 2160 WATTS, GCE6 Enclosure, 19W x 10D x 5H in, 20 lbs
Alternate Item Number: 3AUA0000041882
UPC: 662348076415
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15 OHM resistance for effective energy dissipation
- 2160 Watts power rating for high-demand applications
- GCE6 enclosure for robust protection
- Compact dimensions: 19W x 10D x 5H inches
- Weight: 20 lbs for easy installation

DCS800-DSL-10M-Cable
Interface cable for communication between the DCF external field supply and the DCS800 drive and/or between DCS800 drives. The cable supports communication for 12 pulse operation and drive-to-drive communication with the SDCS-DSL-4 board. This cable is 33 feet (10 m) long and has ferrule-tipped wires on both ends.
FCAN-01-KIT
CANopen is a higher layer protocol based on the CAN (Control Area Network) serial bus system and the CAL (CAN Application Layer). CANopen assumes that the hardware of the connected device has a CAN transceiver and a CAN controller as specified in ISO 11898. The CANopen Communication Profile, CiA Ds301, includes both cyclic and event driven communication, which makes it possible to reduce the bus load to minimum while still maintaining extremely short reaction times. High communication performance can be achieved at relatively low baud rates, thus reducing EMC problems and cable costs. CANopen device profiles define both direct access to drive parameter and time critical process data communication. The FCAN-01 module fulfills CiA (CAN in Automation) standard DSP 402 (Drives and Motion Control).
FMK-A-R1
R1 Flange Mounting Kit for the ACS550 drives allows mounting the drive with the heatsink external to a 3rd party enclosure. Use of the flange kit requires removal of the drive cover, reducing protection to IP00. R1 through R4 flange kits can be used with 3rd party UL Type 1 & 12 (NEMA 1 & 12) enclosures.Frequently Asked Questions
What is the purpose of a braking resistor with variable frequency drives?
Braking resistors increase braking torque capability for faster, more controlled braking and dissipate regenerated power to prevent bus voltage from exceeding drive limits.
What are the voltage and application limitations for Type CR resistors with ACS150 and ACS355 drives?
These resistors are for single-phase 200-240V applications and are intended for stopping duty only.
What is the resistance and wattage for P14494-CR-02 resistor for a 0.5 Hp ACS150/355-01U-02A4-2 drive?
The P14494-CR-02 resistor has 200 Ohms and 100 Watts for this drive, regardless of the duty cycle listed.
What is the resistance and wattage for P14494-49 resistor for a 10 Hp ACS150/355-03U-31A0-2 drive?
The P14494-49 resistor has 15 Ohms and 2160 Watts for a 10 Hp ACS150/355-03U-31A0-2 drive with a 60sec on/180sec off duty cycle.
What is the resistance and wattage for P14494-49 resistor for a 30 Hp ACS550-U1- drive?
The P14494-49 resistor has 15 Ohms and 2160 Watts for a 30 Hp ACS550-U1- drive in 380-480V applications.
What are the key features of Powerohm Type CR resistors?
They use nickel-chromium wire, are housed in a ceramic fixture within an aluminum case, and are encapsulated for electrical isolation and thermal transfer.
How are Type CR resistors designed for efficient cooling?
The resistor element is electrically isolated but thermally bound to the outer case, allowing heat to transfer efficiently for cooling.
What is included with Type CR resistor units for installation?
Units are supplied with 18-inch wire leads and the case has two mounting holes for easy installation.
What are the features of Type GCE enclosures for resistors?
They are heavy-gage screened enclosures with a solid bottom and a separate wiring compartment, including a thermal switch for overload detection.
What is the function of a braking chopper (module)?
Braking modules monitor the drive's DC bus and activate external braking resistors to manage regenerated power and prevent over-voltage trips.


