
ABB Low Voltage Drives ABB-43504 Braking Resistor, 1.72 OHMS, 82280 WATTS, ED5 Enclosure, 30W x 18D x 40H in, 318 lbs
Alternate Item Number: 3AUA0000015203
UPC: 662348000502
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 1.72 OHM resistance for effective braking
- 82,280 WATTS (82.3kW) high power dissipation capacity
- Dimensions: 30" W x 18" D x 40" H, Weight: 318 lbs
- Designed for VFD dynamic braking applications
Specifications
Nema Rating | ED5 Enclosure |
Nema Rating | ED5 |
Size | 30W x 18D x 40H in |
Size | 30x18x40 in |
Frequently Asked Questions
What is the purpose of a braking resistor with a variable frequency drive?
Braking resistors dissipate regenerated power to prevent bus voltage from exceeding the drive's rated limit, increasing braking torque for faster, controlled braking.
What is the role of a braking chopper (module)?
Braking modules monitor the drive's DC bus and activate external braking resistors to manage regenerated power and prevent over-voltage trips.
What is an overhauling load condition in a drive system?
An overhauling load condition occurs when motor speeds exceed the synchronous speed set by the drive's output frequency.
How are Powerohm Type CR resistors constructed?
They use a nickel-chromium wire coil inside a ceramic fixture, housed in a corrosion-resistant aluminum case with wire leads and ceramic potting.
What is the standard brake module supply for ACS550-U1 drives up to 10 Hp?
The brake module is supplied as standard for ACS550-U1 drives up to 10 Hp.
What type of wire should be used when connecting directly to resistors in Type ED enclosures?
If not using optional terminal connections, use 200ºC rated silicone or Teflon wire when attaching directly to resistors.
What is the function of the thermal switch in Type GCE and ED enclosures?
The normally closed thermal switch detects resistor temperature overloads, providing a safety mechanism.
What is the resistance and wattage for a CR resistor used with an ACS150/355-01U-04A7-2 drive (10sec on/50sec off)?
For a 1 HP ACS150/355-01U-04A7-2 drive with a 10sec on/50sec off duty cycle, the CR resistor is 100 Ohms and 100 Watts.
What are the resistance and wattage for an enclosed resistor package for an ACS150/355-03U-07A5-2 drive (60sec on/180sec off)?
For a 2 HP ACS150/355-03U-07A5-2 drive with a 60sec on/180sec off duty cycle, the enclosed resistor package is 35 Ohms and 820 Watts.
What is the resistance and wattage for a CR resistor for an ACS250-03U-04A1-4 drive (3sec on/27sec off)?
For a 2 HP ACS250-03U-04A1-4 drive with a 3sec on/27sec off duty cycle, the CR resistor is 150 Ohms and 100 Watts.




