Authorized ABB Distributor (Installation Products)
ABB - Installation Products XJG94-EMT - 3-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

ABB Installation Products XJG94-EMT 3-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement…

UPC: 786209869296


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB XJG94-EMT 3-1/2 Inch Conduit Expansion Coupling is designed for use with EMT conduit systems requiring thermal expansion and contraction compensation. This expansion coupling accommodates up to 4 inches of axial movement, preventing conduit stress and maintaining system integrity in temperature-variable environments. The integrated internal bonding jumper ensures continuous electrical continuity across the coupling, meeting NEC requirements for grounding and bonding in metallic conduit systems. The coupling is compatible with standard 3-1/2 inch EMT conduit and provides a secure, slip-fit connection that resists vibration and mechanical stress. Ideal for industrial, commercial, and utility applications where conduit runs exceed 100 feet or are exposed to significant temperature fluctuations. The coupling’s design minimizes installation time by eliminating the need for separate bonding jumpers and expansion fittings. The XJG94-EMT is a direct replacement for standard expansion couplings in existing EMT conduit systems, offering a cost-effective solution for thermal movement management without compromising system safety or compliance.
  • 3-1/2 inch EMT conduit compatibility
  • Accommodates 4 inches of axial movement
  • Internal bonding jumper for continuous electrical continuity
  • Designed for thermal expansion/contraction in conduit systems

Specifications

Application
Fittings are Designed to Couple Pieces of Conduit Together that are Subject to Longitudinal Movement
Finish
Zinc Plate
Material Quality
Ductile Iron
Series
XJG
Size
3-1/2 Inch
Special Features
No Disassembly Necessary to Install. Fast, Simple, and Requires Fewer Steps
Standard
UL E23018, CSA
Type
EMT Conduit Fittings
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
47.3000 L
Package Weight (Metric)
21.4550 kg
The Polaris IT-4 Multi-Tap Single-Side Entry Connector features 2 ports sized for 4 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IT-4

The Polaris IT-4 Multi-Tap Single-Side Entry Connector features 2 ports sized for 4 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Set Screw Connector, Concrete Tight, Conduit Size 3/4 Inch, Material Zinc Plated Steel, Color Red, For Fire Alarm Applications

TC122A-FA

Set Screw Connector, Concrete Tight, Conduit Size 3/4 Inch, Material Zinc Plated Steel, Color Red, For Fire Alarm Applications
3 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

XJG88-EMT

3 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit
4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

XJG104-EMT

4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit
4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

XJG108-EMT

4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit
One Hole Snap Strap, Conduit Size 3/4 Inch, Length 1.96 Inches, Width 0.62 Inches, Material Zinc Plated Steel, For use with EMT Conduit, Bag of 3

TS102-3

One Hole Snap Strap, Conduit Size 3/4 Inch, Length 1.96 Inches, Width 0.62 Inches, Material Zinc Plated Steel, For use with EMT Conduit, Bag of 3
One Hole Snap Strap, Conduit Size 1/2 Inch, Length 1.79 Inches, Width 0.57 Inches, Material Zinc Plated Steel, For use with EMT Conduit, Bag of 3

TS101-3

One Hole Snap Strap, Conduit Size 1/2 Inch, Length 1.79 Inches, Width 0.57 Inches, Material Zinc Plated Steel, For use with EMT Conduit, Bag of 3
Connector, Non-Insulated Straight Set-Screw, Size 1/2 Inch, Clamping Range 0.74 Inch - 0.94 Inch, Length 1.46 Inch, Die Cast Zinc, Sold by Each

XC221-1

Connector, Non-Insulated Straight Set-Screw, Size 1/2 Inch, Clamping Range 0.74 Inch - 0.94 Inch, Length 1.46 Inch, Die Cast Zinc, Sold by Each

How to Install the XJG-EMT Expansion Joint

Install the XJG-EMT Expansion Joint to couple two sections of Electrical Metallic Tubing (EMT) subject to longitudinal movement, ensuring an electrically continuous and weatherproof raceway without external bonding.

Estimated time: 30m

Tools needed:

Pipe wrench

Supplies needed:

Electrical Metallic Tubing (EMT)

  1. Insert Electrical Metallic Tubing (EMT)

    Insert the Electrical Metallic Tubing (EMT) into each end of the pre-assembled XJG-EMT Expansion Joint. The gland nut comes partially tightened from the factory to allow for easy insertion of the tubing.

  2. Tighten the Gland Nut

    Using a pipe wrench, tighten the gland nut at the end of the EMT connector. Refer to the Torque Chart for the correct torque specifications: 90.4 N•m (800 lbl-in) for 3/4” and smaller, 113 N•m (1000 lbl-in) for 1”, 1-1/4”, and 1-1/2”, and 181 N•m (1600 lbl-in) for 2” and larger. This action compresses the Teflon packing, providing a rain-tight seal.

  3. Position the Internal Bushing

    Position the internal bushing in the middle of the expansion joint fitting (XJG-EMT) to allow for equal movement of the conduit in both directions. This ensures the joint can accommodate the specified 2 or 4 inches of movement from the center, resulting in a total movement of 4 or 8 inches.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.