Authorized ABB Distributor (Installation Products)
ABB - Installation Products SHC 500-6 - Aluminum Flood-Seal Mechanical Connectors-Mechanical 500 kcmil connectors, dual rated, PVC Insulated, cable range feeder outlet S/L 2-500, outlets 6, length 12-7/8 in

ABB Installation Products SHC 500-6 Aluminum Flood-Seal Mechanical Connectors-Mechanical 500 kcmil connectors, dual rated…

UPC: 783786752010


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 24

Multiplier: 24

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Installation Products SHC 500-6 is a robust aluminum Flood-Seal mechanical connector designed for reliable electrical connections. This connector is dual-rated, ensuring compatibility with a broad range of conductor types. It features PVC insulation for enhanced safety and protection. The SHC 500-6 is engineered to accommodate a feeder outlet cable range of 2-500 kcmil, with six individual outlets available for distribution. Its substantial length of 12-7/8 inches provides ample space for secure termination and management of conductors. This connector is suitable for applications requiring dependable mechanical joining of large gauge aluminum conductors, offering a practical solution for power distribution and termination points. The Flood-Seal design contributes to environmental resistance, making it a suitable choice for various industrial settings where connection integrity is paramount. Rely on ABB's expertise in electrical installation products for your critical infrastructure needs.
  • Aluminum Flood-Seal Mechanical Connector
  • Dual Rated for 500 kcmil Conductors
  • PVC Insulated for Protection
  • Feeder Outlet Cable Range: 2-500 kcmil
  • Six Outlets, 12-7/8 inch Length

Specifications

Application
Flood Seal Mechanical 500 kcmil Connector
Color
Black
Conductor Range
#2 to 500 kcmil
Connection
Mechanical
Connection Type
Mechanical
Insulation
yes
Material
Aluminum
Material
Aluminum Connector
Number of Conductors
6
Poles
6
Series
SHC
Size
length 12-7/8 inch
Size
500 kcmil
Special Features
Aluminum-alloy connector construction for High Strength and High Conductivity, Dual-rated for use with Copper or Aluminum Cables. All Connectors are 100 percent Hi-Pot tested at 4000 volts for 60 seconds
Standard
ANSI C119.1 and C119.4
Type
Flood Seal Mechanical Connector
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
4.8000 L
Package Weight (Metric)
2.1770 kg
Aluminum Flood-Seal Twin-Screw Mechanical Connectors for 500 kcmil series - wire range 2-500 kcmil, length 3-7/8 inch, height 4-3/4 inch, outlets 2 with 2-Holes each. Black PVC Coating.

UH 500-2 R

Aluminum Flood-Seal Twin-Screw Mechanical Connectors for 500 kcmil series - wire range 2-500 kcmil, length 3-7/8 inch, height 4-3/4 inch, outlets 2 with 2-Holes each. Black PVC Coating.
NEMA Transformer Spade Adapters - Aluminum - TSC 4 series, (10) .562 inch Diameter Bolt Holes, L-Shaped - 6.5 inch x 5.25 inch, thickness 3/8 inch. 4-Hole Pad Side is 3 inches Wide with 1.75 inch centers, 6-Hole Pad Side is 3.125 inch x 5.25 inch with 1.75 inch centers.

TSC 4-6

NEMA Transformer Spade Adapters - Aluminum - TSC 4 series, (10) .562 inch Diameter Bolt Holes, L-Shaped - 6.5 inch x 5.25 inch, thickness 3/8 inch. 4-Hole Pad Side is 3 inches Wide with 1.75 inch centers, 6-Hole Pad Side is 3.125 inch x 5.25 inch with 1.75 inch centers.
NEMA Transformer Spade Adapters - Aluminum - TSC 4 series, (12) .562 inch Diameter Bolt Holes, L-Shaped - 7 inch x 6.5 inch, thickness 3/8 inch. 4-Hole Pad Side is 3 inches Wide with 1.75 inch centers,8-Hole Pad Side is 3.125 inch x 7 inch with 1.75 inch centers.

TSC 4-8

NEMA Transformer Spade Adapters - Aluminum - TSC 4 series, (12) .562 inch Diameter Bolt Holes, L-Shaped - 7 inch x 6.5 inch, thickness 3/8 inch. 4-Hole Pad Side is 3 inches Wide with 1.75 inch centers,8-Hole Pad Side is 3.125 inch x 7 inch with 1.75 inch centers.
Aluminum Transformer Spade Adapter, Bolt Size 1/2 inch, Eight Hole Pad, .562 inch Diameter holes. Two Rows of 4 Holes. 1.75 inch centers. 7 inch x 4 inch x .75 inch thick. NEMA Pad - First Hole Center at .825 inch.

TSC 8

Aluminum Transformer Spade Adapter, Bolt Size 1/2 inch, Eight Hole Pad, .562 inch Diameter holes. Two Rows of 4 Holes. 1.75 inch centers. 7 inch x 4 inch x .75 inch thick. NEMA Pad - First Hole Center at .825 inch.
Aluminum Universal Quick Disconnect Transformer Connectors - Z-1 SL Series, cable range 12-350, length 4-3/4 in, stud type 1, outlets 6

Z 4023-1 SL

Aluminum Universal Quick Disconnect Transformer Connectors - Z-1 SL Series, cable range 12-350, length 4-3/4 in, stud type 1, outlets 6
Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 6. Length 5-1/4 inch. Includes Caps and Screws.

RAB 1/0-6

Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 6. Length 5-1/4 inch. Includes Caps and Screws.
Aluminum Flood-Seal Mechanical Connectors with Streetlight option, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, outlets 4, length 7 in

SHC 4

Aluminum Flood-Seal Mechanical Connectors with Streetlight option, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, outlets 4, length 7 in
Aluminum Flood-Seal Mechanical Connectors with Streetlight option, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, outlets 5, length 8-7/8 in

SHC 5

Aluminum Flood-Seal Mechanical Connectors with Streetlight option, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, outlets 5, length 8-7/8 in

How to Install Sweetheart SHC 500 Connectors

This guide provides step-by-step instructions for installing Sweetheart SHC 500 Connectors, including cable preparation, conductor insertion, and final tightening. Installation must be performed by trained installers in accordance with all applicable electrical codes and safety rules.

Estimated time: 30m

Tools needed:

Cutting tool, Wire strippers, Wire brush, Torque wrench or torque screwdriver

Supplies needed:

Sweetheart SHC 500 Connector, Electrical cable, Silicone grease

  1. Remove Insulating Sleeve

    Remove the insulating sleeve from the connector outlet.

  2. Select Correct Cut-Off Ring

    Select the correct cut-off ring for the specific cable size you are using.

  3. Cut Rocket Sleeve

    Cut off the rocket sleeve at the tip of the arrow, ensuring the correct cable size is visible on the opened rocket.

  4. Strip Cable Insulation

    Strip approximately 2-1/4 inches of insulation from the cable end, baring the conductor. Beveling the cut edge of the insulation is preferred but not strictly necessary.

  5. Wire Brush Conductor

    Thoroughly wire brush the bare conductor to break up any oxides on its surface.

  6. Clean Cable and Apply Grease

    Wipe the cable clean, then apply silicone grease to the prepared cable end.

  7. Slide Rocket Over Cable

    Slide the cut rocket over the prepared cable end.

  8. Insert Conductor

    Insert the prepared conductor into the connector outlet, ensuring a maximum of 1/8 inch of bare conductor is showing.

  9. Slide Rocket Sleeve into Position

    Slide the rocket sleeve over the outlet and onto the PVC shoulder until the rocket butts firmly against the connector bar.

  10. Tighten Set Screws

    Tighten the set screws down on the conductors to the recommended torque. For #6 to #4 wire, apply 120 in.-lbs. (10 ft.-lbs.). For #2 to 350 MCM, apply 240 in.-lbs. (20 ft.-lbs.). For 400 to 500 MCM, apply 360 in.-lbs. (30 ft.-lbs.).

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.