
ABB Installation Products RRK 40-INS Aluminum Flood-Seal Compression Splice Kits, wire range 4/0 Stranded - Compressed…
UPC: 783786746262
Documents & Media
Contact for Pricing
Minimum Qty: 400
Multiplier: 400
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- For 4/0 stranded compact aluminum conductors only
- Flood-seal insulating cover (7-1/4" length) included
- Splice dimensions: 4-19/64" length x 7/8" outside diameter
- Compatible with multiple installing dies (UT 3 M, HTU 36, 5/8, etc.)
- Includes instruction sheet for simplified installation
Specifications
Application | Dissipate Heat and Make Perfect Watertight Seals |
Color | Pink |
Conductor Range | 4/0 AWG |
Connection | Compression |
Connection Type | Compression Splice |
Insulation | Yes |
Material | Aluminum |
Material | Aluminum Connector, EPDM Cover |
Number Of Conductors | 2 |
Series | RRK |
Size | 3 inch Connector, 5-1/2 inch Cover |
Size | 4/0 Stranded - Compressed - Compact |
Special Features | Prefilled with Oxide Inhibitor to Prevent Oxidation an Keep Out Moisture. Rubber Flood-Seal Insulating Cover fits Snugly for Maximum Heat Dissipation, No Tape Required. Compact Size. Radiating Rib Design Dissipated Heat, Centers the Watertight Insulating Cover and Seals Perfectly Every Time |
Standard | ANSI C119.4 |
Type | Compression Splice |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.2500 L |
Package Weight (Metric) | 0.1130 kg |

RRS 40
Radiating Rib, Aluminum Compression Splice, 4/0 Aluminum. 4.300 inch long x .876 inch at widest Diameter. Center Stop. Pink Caps. Contains Oxide Inhibitor.
PTO-400
Offset Pin Terminal 400 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.
RRK 500-INS
Aluminum Flood-Seal Compression Splice Kits, wire range 500, connector length 6-3/4 inch, insulator length 10-3/4 inch, dies 472, 655, 13A, 96, 1-1/2-2, no color code, Strip 2-1/4 inch, Instruction Sheet included. For Aluminum Conductors Only.
RRK 6
Aluminum Flood Seal Compression Splice Kit, Radiating Rib Splice kit, #6 Stranded - Compressed - Compact. Installing Dies UT 3, 1/2, TQ, 42, 163, 1/2. Strip Length 1 inch. Splice Length 2 inch, Largest Outside Diameter 37/64 inch. Includes Flood Seal Insulating Cover. For Aluminum Conductors Only.
ATC 5789
Tin-Plated Aluminum Tapered Compression Reducing Splice. 750 kcmil AL-CU to 1000 kcmil AL-CU. Installing Dies 161, 302, 292, 319, 1 3/4-H. Length 907/8 inch. Outside Diameter 1-27/32 inch. Oil Stop. Oxide Inhibitor. Yellow Cap. Brown Cap.
X 1 U 4040-10
Uninsulated Aluminum Service Entrance Compression Splices - 840 Die Series, Conductor A: Pink, - Solid Aluminum, - Solid Copper, 4/0 Stranded, 4/0 ACSR, Conductor B: Pink, - Solid Aluminum, - Solid Copper, 4/0 Stranded, 4/0 ACSR, Length 10 Inches.
X 1 U 1010-10
Uninsulated Aluminum Service Entrance Compression Splices, Conductor A: Yellow Cap, Wire Size 1/0 Stranded, 1/0 ACSR, Conductor B: Yellow Cap, Wire Size 1/0 Stranded, 1/0 ACSR. 10 inch long. For AL to AL or AL to CU Conductors. Installing Dies 840, TX, 249, 76, 11A. Oil Stop, Oxide Inhibitor.Frequently Asked Questions
What is the splice length and outside diameter?
The splice measures 4-19/64 inches in length with a 7/8-inch outside diameter.
Is the insulating cover included with the splice kit?
Yes, the kit includes a trimmed flood-seal insulating cover with a 7-1/4-inch length.
Is an instruction sheet provided with the kit?
Yes, an instruction sheet is included to guide installation.
What conductor size is compatible with RRK 40-INS?
The RRK 40-INS is designed for 4/0 stranded compact aluminum conductors only.
Can this splice kit be used for copper conductors?
No, the RRK 40-INS is designed exclusively for aluminum conductors.
Which installing dies are compatible with this kit?
The kit supports installing dies UT 3 M, HTU 36, 5/8, UT 3 5/8 GOLD, 245, 166, 635, and 5/8.
How to Install the RRK Series Radiating Rib Splice System
This guide provides step-by-step instructions for installing the RRK Series Radiating Rib Splice System, featuring Flood-Seal® EPDM insulation, to create a secure and insulated electrical connection. Ensure installation is performed by trained professionals.
Estimated time: 20m
Tools needed:
Wire strippers, Crimping tool
Supplies needed:
RRK Series Radiating Rib Splice Connector, EPDM rubber sleeve, Electrical conductors, Grease (if not pre-filled)
- Prepare the EPDM Sleeve and Conductors
WARNING: Danger of Electric Shock! Installation must be performed by trained installers in accordance with all applicable local, state and national electrical codes, installation standards and safety rules. Slide the EPDM rubber sleeve onto one of the conductors. If there is excess grease on the conductor, move it to the conductor insulation for later use in step 4.
- Strip Cable Ends
Strip the ends of the cables according to the following chart: #2 TO 2/0 requires 1-1/2 inches; 3/0 TO 4/0 requires 2-1/4 inches; 250 TO 350 mcm requires 2-1/2 inches; 500 mcm requires 2-3/4 inches.
- Insert and Crimp Conductors
Insert the stripped conductors into the splice connector. Crimp the connector using the recommended dies marked on the connector. For 3/0 AND 4/0 SIZES, ensure you begin crimping at the designated point and DO NOT CRIMP at the indicated 'DO NOT CRIMP HERE' section.
- Seal the Connection
Spread any excess grease (from Step 1 or Step 2 if applicable) over the crimped connector. Then, slide the EPDM rubber sleeve over the entire connection until it locks firmly into position. Visually inspect the installed sleeve; a single 'hump' in the rubber sleeve indicates proper installation.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.
