
ABB Installation Products RRK 20-INS Aluminum Flood-Seal Compression Splice Kits, wire range 2/0 Stranded - Compressed…
UPC: 783786746064
Documents & Media
Contact for Pricing
Minimum Qty: 400
Multiplier: 400
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- One-piece Flood-Seal® insulating cover with pre-lubrication for quick, tool-free installation
- Radiating rib design centers cover and dissipates heat for reliable performance
- Prefilled with oxide inhibitor to prevent oxidation and moisture ingress
- Splice length: 3 inches; Outside diameter: 13/16 inches; Cover length: 5-1/2 inches
- Compatible with dies: UT 3 M, HTU 36, 5/8, UT 3 5/8 GOLD, TU, 52, BG, 243, 5/8
Specifications
Application | Dissipate Heat and Make Perfect Watertight Seals |
Color | Gray |
Conductor Range | 2/0 to 2/0 AWG |
Connection | Compression |
Insulation | Yes |
Material | Aluminum Connector, EPDM Cover |
Number Of Conductors | 2 |
Size | 3 inch Connector, 5-1/2 inch Cover |
Special Features | Prefilled with Oxide Inhibitor to Prevent Oxidation an Keep Out Moisture. Rubber Flood-Seal Insulating Cover fits Snugly for Maximum Heat Dissipation, No Tape Required. Compact Size. Radiating Rib Design Dissipated Heat, Centers the Watertight Insulating Cover and Seals Perfectly Every Time |
Standard | ANSI C119.4 |
Type | Compression Splice |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.1400 L |
Package Weight (Metric) | 0.0640 kg |

RRK 20 CU
Copper Compression Splice Kits, Wire Range 2/0, Connector Length 3 Inches, Insulator Length 5-1/2 Inches, Dies 5/8 (5), Color Code Gray. For Copper Conductors Only.
ASC6T
Dual Rated Aluminum Splice 6 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.
SA6-T
Aluminum Compression Splice, Tin-Plated to inhibit corrosion, high conductivity thick wall aluminum, Factory pre-filled joint compound and sealed with easy pull-out end plug to inhibit corrosion, Panduit and specified competitor die index numbers marked on barrel for proper crimp die selection, Internal solid stop prevents over-insertion of conductor, UL Listed and CSA Certified to 35 KV and temperature rated to 90C when crimped with Panduit and specified competitor crimping tools and dies.
RRK 2-INS
Aluminum Flood-Seal Compression Splice Kits, wire range 2 Stranded - Compressed - Compact. Installing Dies UT 3 M, HTU 36, 5/8, UT 3 5/8 GOLD, TU, 52, BG, 243, 5/8. Splice Length 3 inch x 13/16 inch Outside Diameter. Includes Trimmed Flood Seal Insulating Cover - Length 5-1/2 inch. Instruction Sheet included. For Aluminum Conductors Only.
RRK 350-INS
Aluminum Flood-Seal Compression Splice Kits, wire range 350 Stranded - Compact. Installing Dies 840, TX, 76, 249, 11A. Splice Length 4-19/64 inch x 1-7/64 inch Outside Diameter. Includes Trimmed Flood Seal Insulating Cover - Length 7-1/2 inch. Instruction Sheet included. For Aluminum Conductors Only.
RRK 500-INS
Aluminum Flood-Seal Compression Splice Kits, wire range 500, connector length 6-3/4 inch, insulator length 10-3/4 inch, dies 472, 655, 13A, 96, 1-1/2-2, no color code, Strip 2-1/4 inch, Instruction Sheet included. For Aluminum Conductors Only.
RRK 6
Aluminum Flood Seal Compression Splice Kit, Radiating Rib Splice kit, #6 Stranded - Compressed - Compact. Installing Dies UT 3, 1/2, TQ, 42, 163, 1/2. Strip Length 1 inch. Splice Length 2 inch, Largest Outside Diameter 37/64 inch. Includes Flood Seal Insulating Cover. For Aluminum Conductors Only.
ATC 5789
Tin-Plated Aluminum Tapered Compression Reducing Splice. 750 kcmil AL-CU to 1000 kcmil AL-CU. Installing Dies 161, 302, 292, 319, 1 3/4-H. Length 907/8 inch. Outside Diameter 1-27/32 inch. Oil Stop. Oxide Inhibitor. Yellow Cap. Brown Cap.Frequently Asked Questions
What wire gauge is compatible with this splice kit?
This ABB RRK 20-INS splice kit is designed for 2/0 stranded aluminum conductors.
What type of conductors can be used with this kit?
This splice kit is exclusively for use with aluminum conductors.
What are the dimensions of the splice itself?
The splice has a length of 3 inches and an outside diameter of 13/16 inches.
What is the length of the insulating cover?
The trimmed flood-seal insulating cover included with the kit is 5-1/2 inches long.
What installation dies are required for this kit?
Installation requires specific dies including UT 3 M, HTU 36, 5/8, UT 3 5/8 GOLD, TU, 52, BG, 243, and 5/8.
How to Install the RRK Series Radiating Rib Splice System
This guide provides step-by-step instructions for installing the RRK Series Radiating Rib Splice System, featuring Flood-Seal® EPDM insulation. Ensure installation is performed by trained professionals in accordance with all applicable local, state, and national electrical codes, installation standards, and safety rules to prevent electric shock.
Estimated time: 20m
Tools needed:
Wire strippers, Crimping tool
Supplies needed:
EPDM rubber sleeve, Electrical conductors, Splice connector, Grease (pre-applied or from conductor)
- Slide EPDM Sleeve onto Conductor
Slide the EPDM rubber sleeve onto one of the electrical conductors. If there is excess grease on the conductor, carefully move it to the conductor insulation for use in a later step.
- Strip Cable Ends
Strip the ends of the electrical cables according to the following lengths: For #2 to 2/0 cable size, strip 1-1/2 inches; for 3/0 to 4/0 cable size, strip 2-1/4 inches; for 250 to 350 mcm cable size, strip 2-1/2 inches; and for 500 mcm cable size, strip 2-3/4 inches.
- Insert and Crimp Conductors
Insert the stripped conductors into the splice connector. Crimp the connector using the recommended dies marked on the connector. For 3/0 and 4/0 sizes, ensure you begin crimping 5/8 inches from the end and avoid crimping the very end of the connector.
- Spread Excess Grease
Spread any excess grease, which was previously moved to the conductor insulation in Step 1, evenly over the crimped connector to ensure a complete and proper seal.
- Position EPDM Sleeve
Slide the EPDM rubber sleeve over the crimped connection until it securely locks into its final position. Perform a visual inspection; a properly installed sleeve will show only one distinct 'hump'.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.