Authorized ABB Distributor (Installation Products)
ABB - Installation Products RAB 3 OR - Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Three Conductor, and Outward Rocket.

ABB Installation Products RAB 3 OR Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and…

UPC: 783786745135


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB RAB 3 OR Multi Seal Aluminum Insulated Bus Connector is a high-strength, high-conductivity 6061-T6 aluminum alloy connector designed for reliable multi-conductor electrical connections in secondary underground distribution systems. This three-conductor connector accommodates conductor sizes from #12 AWG solid wire up to 350 kcmil, supporting both aluminum and copper conductors for versatile installation options. The connector features a high-performance TPE compound insulation and tin-plated screws, ensuring long-lasting performance and corrosion resistance in demanding environments. With a temperature range of -40°F to 194°F (-40°C to 90°C), the RAB 3 OR is ideal for URD direct burial, below-grade boxes, above-grade pedestals, and street light taps. Its compact dimensions of 4.60" x 2.90" (117 mm x 74 mm) make it suitable for space-constrained installations. The Flood-Seal design with oxide inhibitor ensures secure, watertight connections, while the multi-port configuration allows for efficient cable management. Installation is straightforward, with unused ports requiring sealing to maintain system integrity. This connector is a practical choice for electricians and system designers seeking durable, insulated connections in multi-conductor systems.
  • Conductor range: #12 AWG solid to 350 kcmil (aluminum or copper)
  • Voltage rating: 600 V, tested to 4000 V for 60 seconds
  • Temperature range: -40°F to 194°F (-40°C to 90°C)
  • Material: 6061-T6 aluminum alloy with TPE insulation and tin-plated screws
  • Applications: URD direct burial, below-grade boxes, above-grade pedestals, street light taps

Specifications

Application
High-Performance Dual-Rated Connector
Color
Black
Conductor Range
#12 to 350 kcmil
Connection
Mechanical
Connection Type
Insulated Bus Connector
Environmental Conditions
Waterproof
Insulation
yes
Material
Aluminum and Copper
Material
Aluminum
Number Of Conductors
3
Number of Poles
3
Poles
3
Series
RAB 3
Series
Multi Seal
Size
#12 solid - 350 kcmil
Size
#12 AWG to 350 kcmil
Size
Length 3-5/8 inches
Special Features
Outward Rocket
Standard
RUS Accepted
Type
Aluminum Flood-Seal Multi-Port Dual-Rated Connectors - RAB 350 Series
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor. Outward Rocket.

RAB 4 OR

Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor. Outward Rocket.
Multi Seal, Aluminum Insulated Bus Connector, #14 - 1/0, Aluminum and Copper, Three Conductor, with Oxide Inhibitor, Orange Plug instead of Black

RAB 1/0-3 C-OP

Multi Seal, Aluminum Insulated Bus Connector, #14 - 1/0, Aluminum and Copper, Three Conductor, with Oxide Inhibitor, Orange Plug instead of Black
Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor, with Oxide Inhibitor and Outward Rocket. Santoprene Coating. Includes 5/8-18 x .937 inch Screw, Instruction Sheet.

RAB 4 COR

Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor, with Oxide Inhibitor and Outward Rocket. Santoprene Coating. Includes 5/8-18 x .937 inch Screw, Instruction Sheet.
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Six Conductor. EZ Torque shear head screws supplied in all outlets

RAB 6 TS

Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Six Conductor. EZ Torque shear head screws supplied in all outlets
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Six Conductor, with Oxide Inhibitor, Auto Torque Screws

RAB 6 ATC

Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Six Conductor, with Oxide Inhibitor, Auto Torque Screws
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Nine Conductor, with Oxide Inhibitor. Anodized Screws.

RAB 9 C-AS

Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Nine Conductor, with Oxide Inhibitor. Anodized Screws.
ZeeBar, ZBT Series, Set Screw Bar Transformer Connector. Kit - contains (1) Bar - 10 Position 1/0 to 750 Left Hand Feed, (3) Bars - 10 Position 1/0 to 750 Right Hand Feed, (2) Support Brackets 5.5 inch long x 1.625 inch wide x 0.25 inch thick with Hardware and 1 inch Diameter x 30 inch Rods, (3) Gray Boots.

ZBT 7969 CK

ZeeBar, ZBT Series, Set Screw Bar Transformer Connector. Kit - contains (1) Bar - 10 Position 1/0 to 750 Left Hand Feed, (3) Bars - 10 Position 1/0 to 750 Right Hand Feed, (2) Support Brackets 5.5 inch long x 1.625 inch wide x 0.25 inch thick with Hardware and 1 inch Diameter x 30 inch Rods, (3) Gray Boots.
Keebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Six Conductor

ZBT 3037

Keebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Six Conductor

How to Install RAB 350 OR Series Connectors

This guide provides step-by-step instructions for the safe and correct installation of RAB 350 OR Series connectors. Installation must be performed by trained installers following all applicable electrical codes and safety rules to prevent electric shock.

Estimated time: 30m

Tools needed:

Wrench, Wire strippers, Insulating gloves (rated to appropriate voltage)

Supplies needed:

Cable (appropriate size for the connector)

  1. Prepare the Rocket Connector

    Cut the rocket at the marked ring for #12 to 250 kcmil cables. For 300 to 350 kcmil cables, remove the rocket entirely.

  2. Measure and Strip Cable Insulation

    Place the cable alongside the marking on the tower to measure the correct strip length. Strip the cable insulation and pencil the insulation as required.

  3. Insert Cable into Assembly

    Insert the prepared cable directly into the rocket/RAB assembly. If necessary, loosen the hex bolt to facilitate cable insertion.

  4. Fully Insert Cable

    Continue to insert the cable into the tower (for 300 to 350 kcmil) or the rocket (for #12 to 250 kcmil) until the end of the conductor touches the internal window. If installing on an energized main, ensure the circuit is NOT under load.

  5. Remove Screw Plug

    Pull the tether to remove the screw plug from the connector.

  6. Torque the Connector

    Using a wrench, torque the connector to the specified values: 120 in-lb for #12 to #3 cables, and 240 in-lb for #2 to 350 kcmil cables. Refer to the values shown on the inside of the tether.

  7. Replace Screw Plug

    Replace the screw plug securely into the connector.

  8. Seal Unused Cable Ports

    Ensure all unused cable ports on the assembly are properly sealed.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.