Authorized ABB Distributor (Installation Products)
ABB - Installation Products RAB 6 ATC - Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Six Conductor, with Oxide Inhibitor, Auto Torque Screws

ABB Installation Products RAB 6 ATC Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Six…

UPC: 783786745326

Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 40

Multiplier: 40

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB RAB 6 ATC is a six-conductor, aluminum insulated bus connector designed for reliable electrical connections. Manufactured by ABB - Installation Products, this connector (SKU: RAB 6 ATC) is engineered to accommodate a wire size range from #12 AWG to 350 kcmil, making it versatile for various industrial and commercial applications. It supports connections for both aluminum and copper conductors, offering flexibility in material selection for your wiring projects. The key feature of the RAB 6 ATC is its integrated Auto Torque Screws. These screws ensure a consistent and correct torque application during installation, eliminating guesswork and reducing the risk of loose connections or conductor damage. This auto-torque mechanism is crucial for maintaining electrical integrity and preventing potential failures, especially in systems requiring precise tension. The connector also comes pre-filled with an oxide inhibitor, which is vital for aluminum conductors. The inhibitor prevents oxidation on the conductor surface, ensuring a low-resistance connection that remains stable over time and under varying environmental conditions. With six poles, this bus connector is suitable for multi-circuit applications or complex distribution panels. The insulated design provides an added layer of safety, protecting against accidental contact and short circuits. The robust construction ensures durability and long-term performance in demanding electrical environments. The RAB series from ABB is recognized for its quality and reliability in electrical installations. Key Specifications: - Manufacturer: ABB - Installation Products - SKU: RAB 6 ATC - Wire Size Range: #12 - 350 kcmil - Conductor Material Compatibility: Aluminum, Copper - Number of Conductors (Poles): 6 - Connection Mechanism: Auto Torque Screws - Features: Insulated, Includes Oxide Inhibitor
  • Six-conductor insulated bus connector for #12 - 350 kcmil conductors
  • Compatible with both aluminum and copper conductors
  • Features Auto Torque Screws for consistent, reliable connections
  • Includes pre-applied oxide inhibitor for aluminum conductor integrity
  • Manufactured by ABB - Installation Products (SKU: RAB 6 ATC)

Specifications

Application
High-Performance Dual-Rated Connector
Color
Black
Conductor Range
#12 to 350 kcmil
Connection
Mechanical
Environmental Conditions
Waterproof
Insulation
yes
Material
Aluminum
Number of Conductors
6
Number of Poles
6
Size
Length 7-1/8 inches
Special Features
Shear Head Screws, Oxide Inhibitor
Standard
RUS Accepted
Type
Aluminum Flood-Seal Multi-Port Dual-Rated Connectors - RAB 350 Series
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.1300 L
Package Weight (Metric)
0.5130 kg
Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor. Outward Rocket.

RAB 4 OR

Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor. Outward Rocket.
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Nine Conductor, with Oxide Inhibitor. Anodized Screws.

RAB 9 C-AS

Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Nine Conductor, with Oxide Inhibitor. Anodized Screws.
ZeeBar, ZBT Series, Set Screw Bar Transformer Connector. Kit - contains (1) Bar - 10 Position 1/0 to 750 Left Hand Feed, (3) Bars - 10 Position 1/0 to 750 Right Hand Feed, (2) Support Brackets 5.5 inch long x 1.625 inch wide x 0.25 inch thick with Hardware and 1 inch Diameter x 30 inch Rods, (3) Gray Boots.

ZBT 7969 CK

ZeeBar, ZBT Series, Set Screw Bar Transformer Connector. Kit - contains (1) Bar - 10 Position 1/0 to 750 Left Hand Feed, (3) Bars - 10 Position 1/0 to 750 Right Hand Feed, (2) Support Brackets 5.5 inch long x 1.625 inch wide x 0.25 inch thick with Hardware and 1 inch Diameter x 30 inch Rods, (3) Gray Boots.
Keebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Six Conductor

ZBT 3037

Keebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Six Conductor
Zeebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Six Conductor option DS - Double Set Screw

ZBT 3037 DS

Zeebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Six Conductor option DS - Double Set Screw
Keebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Four Conductor. 6-3/8 inch x 3 inch x 3-1/16 inch

ZBT 2027-175

Keebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Four Conductor. 6-3/8 inch x 3 inch x 3-1/16 inch
Zeebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Twenty-Four Conductor TN Option - Tin Plated, Option DS - Double Set Screw, Option R - Right Hand Feed, Option V1 - Mount Hole Variation

ZBT 120127 DSRTN V1

Zeebar Aluminum Transformer Connector, 1/0 - 750 kcmil, Aluminum and Copper, Bolt 1/2 inch, Twenty-Four Conductor TN Option - Tin Plated, Option DS - Double Set Screw, Option R - Right Hand Feed, Option V1 - Mount Hole Variation
Zeebar Aluminum Transformer Connector, 1/0 - 1000 kcmil, Stud 5/8 inch and 1 inch, Eight Conductor with Oxide Inhibitor, Option T - Sheer bolt Torque screw on stud mount hole, Option M - support mount hole, Stretch wrap to encompass keepers and main body area. 11.548 inches long

ZBKW 4041 EZ 2 SLCTM

Zeebar Aluminum Transformer Connector, 1/0 - 1000 kcmil, Stud 5/8 inch and 1 inch, Eight Conductor with Oxide Inhibitor, Option T - Sheer bolt Torque screw on stud mount hole, Option M - support mount hole, Stretch wrap to encompass keepers and main body area. 11.548 inches long

How to Install the RAB 350 TS - EZ TORQUETM Series Connector

This guide provides step-by-step instructions for installing the RAB 350 TS - EZ TORQUETM Series connector, including cable preparation and secure connection. WARNING: Installation must be performed by trained installers in accordance with all applicable electrical codes and safety rules to prevent electric shock.

Estimated time: 15m

Tools needed:

Screwdriver, Wire strippers, Insulating gloves

Supplies needed:

Electrical cable, Cable plug

  1. Prepare the Rocket (if necessary)

    For 300/350 kcmil cables, remove the rocket as it is not required. For #12 to 250 kcmil cables, cut the rocket at the marked ring. Reinsert the rocket if it was cut and is required for your cable size.

  2. Prepare the Cable

    Measure the required strip length by aligning the cable with the markings on the connector's tower. Strip the cable to this measured length.

  3. Insert the Cable

    Insert the prepared cable into the appropriate opening (the tower for 300-350 kcmil or the rocket for #12-250 kcmil) until the end of the conductor firmly touches the internal window.

  4. Remove the Screw Plug

    Locate the screw plug and remove it by pulling its tether.

  5. Secure the Connection

    Using a screwdriver, tighten the screw until its head breaks off. This indicates that the proper torque has been applied to secure the connection.

  6. Replace the Screw Plug

    Snap the screw plug back into its position and press it firmly into the tower to ensure a proper seal.

  7. Seal Unused Ports and Replaced Cables

    Ensure all unused cable ports are properly sealed. If a cable was previously removed from a port, reseal that port by installing the attached cable plug.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.