
ABB Installation Products R2T15M4-N0350 15 kv, Cable Terminator Ranger2, Outdoor, Cable Type - Tape Shield/Wire…
UPC: 075114283359
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15 kV voltage rating for outdoor applications
- Accommodates insulation diameters from 1.30" to 2.10" (33 mm to 53 mm)
- Non-tracking silicone housing with superior memory and weathering characteristics
- Aluminum 2-hole spade connector for #2 AWG to 1250 kcmil conductors
- Shrink-fit technology with pull-down jacket seal for secure termination
Specifications
Application | Cable Termination, Outdoor Application, 15kV |
Cable Type | Copper Tape Shielded Wire |
Color | Gray |
Conductor Size | 650 to 750 kcmil |
Connection Type | 2-Hole Spade #2-1250 kcmil |
Connection Type | 2-Hole Spade |
Connection Type | Aluminum 2-Hole Spade #2-1250 kcmil |
Current Rating | 1250 kcmil |
Earthing | Products Includes Their Own Grounding System |
Frequency | 48-62 Hz |
Material | Silicone, Aluminum |
Material | Aluminum |
Mounting | Product Need to have Cable Holder (not included) |
Mounting Type | Outdoor |
Mounting Type | Free-hanging, restricted spaces |
Number Of Terminals | (1) Single Phase |
Series | Ranger2 |
Size | Insulation Range 4 - 1.30 inch to 2.10 inch (33 mm to 53 mm) |
Size | 4-1.30 inch to 2.10 inch (33 mm to 53 mm) |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Outdoor - Ranger2 |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

R2T15M4-N2360-B3
15 kv, Cable Terminator Ranger2, Outdoor, Cable Type - Tape Shield/Wire Shield/UniShield, Insulation Range 4 - 1.30 inch to 2.10 inch (33 mm to 53 mm), Connector Type N2 - Copper 2-Hole Spade #2-1250 kcmil, Conductor Code 360 - Compressed 650/Compact 750, Cable Mounting Bracket B3 - Material Stainless Steel - Size - 1.45 inch to 1.95 inch (37mm - 50mm)
R2T15J1-T0270
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For AL or CU Conductor w/copper wire lead #2 to 4/0. 4/0 Stranded or 250 kcmil Solid
R2T15J1-N0330
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Aluminum 2 Hole Spade #2-1250kcmil, Stranded or Compressed 500 /Compact or Solid 600.
R2T35J2-N0250
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 2/0 /Compact or Solid 3/0
R2T15J1-N0270
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2 to 1250 kcmil. 4/0 Stranded or 250 kcmil Solid
R2T15J1-N0250
Ranger2 Termination. Type - Outdoor, 15kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .64 inch - 1.12 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 250 -Stranded or Compressed 2/0 Compact or Solid 3/0.
R2T35J2-T0270-B3
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead, Stranded or Compressed 4/0 /Compact or Solid 250, Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch
R2T35J2-N0230
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed #1 /Compact or Solid 1/0Frequently Asked Questions
What voltage rating does this terminator support?
The R2T15M4-N0350 supports a 15kV voltage rating for outdoor applications.
What cable insulation sizes does this terminator accommodate?
The terminator fits cable insulation diameters from 4-1.30 inch to 2.10 inch (33 mm to 53 mm).
What type of cable shields are compatible with this terminator?
The R2T15M4-N0350 works with tape shield, wire shield, or UniShield cables.
What connector type is used in this terminator?
It uses an aluminum 2-hole spade connector rated #2-1250 kcmil.
What conductor sizes are compatible with this terminator?
The terminator supports compressed 650 or compact 750 conductor configurations.
How to Install the R2T15M4 Ranger 2 Silicone Rubber Termination for Tape Shielded Cables
This guide provides detailed instructions for installing the R2T15M4 Ranger 2 Shrink-fit Silicone Rubber Termination on 15kV tape-shielded cables, covering cable preparation, ground braid installation, and termination body placement.
Estimated time: 1h 30m
Tools needed:
Wire strippers, Measuring tape or ruler, Crimping tool, Soldering iron, Scissors or utility knife, Solvent saturated pads or wipes, Aluminum oxide abrasive (grit 120 or finer, optional)
Supplies needed:
R2T15M4 Termination Kit (includes silicone rubber termination, lubricant, gray silicone rubber tape, constant force spring, preformed ground braid, sealing mastic, copper foil tape, gloves), Terminal lug or connector, Approved solvent, Oxide inhibitor, Vinyl electrical tape
- De-energize and Prepare for Installation
DANGER: All apparatus must be de-energized during installation or removal of parts. Do not touch or move energized products. Inspect all kit contents and components for completeness, damage, and compatibility with the cable and mating parts. Gather all required tools and maintain cleanliness throughout the procedure.
- Prepare Cable for Termination
Verify the cable size fits within the insulation range specified in the Termination Selection Chart. Train the cable into its final position and cut it to the required length. Prepare the cable by removing the jacket, semi-conductive layer, and insulation according to the dimensions provided in Table 1 and the diagram, allowing for terminal lug depth and aluminum lug growth. Secure the edge of the tape shield with a single wrap of the supplied copper foil tape to prevent unrolling.
- Install Ground Braid Assembly
Wrap one band of sealing mastic around the cable jacket 1/4 inch (6mm) from the jacket end, using 50% stretch. Position the preformed ground braid with its short tail over the tape shield and the solder block centered over the mastic strip. Secure the ground braid to the cable jacket with vinyl tape and press the solder block into the mastic. Apply a second mastic band over the solder block and previous mastic, maintaining the 1/4 inch (6mm) dimension. Wrap two half-lapped layers of vinyl tape around the mastic seal. Wrap the ground braid around the cable tape shield once, trim excess, and secure it with the constant force spring, wrapping in the same direction. Cinch the spring and secure it with two wraps of vinyl tape.
- Install Terminal Lug and Clean Cable
Ensure the termination assembly fits over the selected terminal lug. If not, clean the insulation and slide the termination onto the cable before installing the lug (do not remove the core yet). Position the terminal lug or connector and crimp it according to the manufacturer's directions, leaving the last 3/8 to 1/2 inch uncrimped. Remove any excess oxide inhibitor and all sharp crimp flashings or edges. Wipe the cable insulation with an approved solvent, ensuring no solvent touches the semi-conductive insulation shield. If necessary, use aluminum oxide abrasive (grit 120 or finer) on the insulation only, being careful not to reduce the cable insulation diameter.
- Install Silicone Rubber Termination Body
Create a track-resistant moisture seal between the termination insulator and the lug/connector by wrapping a band of gray silicone rubber electrical tape around the base of the terminal lug. The tape band should not exceed 2 layers if the barrel diameter is equal to or greater than the cable primary insulation; otherwise, build up the tape to match the insulation diameter. Liberally coat the edge of the semi-conductive insulation shield with silicone grease to fill the step at the semi-con cut-off. For lower terminations with a fold-down skirt, pull the loose end of the removable core through the top until it is flush with the bottom of the termination. Slide the termination body onto the cable, aligning its forward edge with the mastic seal. Carefully remove the core by unwinding it counter-clockwise from the loose end, ensuring the termination body remains butted against the mastic seal. Do not push or pull the termination assembly during core removal.
- Finalize Moisture Seal and Ground Connection
Apply a thin film of silicone lubricant to the skirt and mastic seal area, avoiding the skirt tabs. Carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal using the remaining gray silicone rubber electrical tape, overlapping the termination insulator by approximately 1 inch and extending the tape over a non-crimped region of the lug/connector barrel with a half-lap configuration. Connect the ground braid to the system ground. Finally, confirm that the High-K step does not exceed 1.5 inches.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.