ABB Installation Products K656SR-H0260 600 Amp, 15/25kV, 600 Series Astraight Receptacle with cable adapter, lug and retaining…
UPC: 783786797110
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 600 Amp continuous current rating for medium-voltage applications
- 15/25 kV voltage rating for flexible system compatibility
- Aluminum compression lug for reliable electrical and mechanical connection
- Supports cable insulation diameters from 0.850" to 1.050"
Specifications
Amperage Rating | 600 A |
Application | 15/25kV, 600 Amps |
Color | Black |
Conductor Range | 3/0 STR/COMPR AWG , 4/0 SOL/COMPT AWG |
Connection | Compression |
Environmental Conditions | All Weather Conditions, Fully Submersible |
Insulation | True |
Length | 16.98 in |
Length | 431.292 mm |
Material | Housing - EPDM-Rubber |
Special Features | Fully shielded, fully submersible molded rubber housing. 100 Percent peroxide-cured construction includes insulation and conductive EPDM materials. Can be easily connected or disconnected using standard hand tools and equipment in a de-energized state. Optional accessories allow visible external separation, by-pass, isolation, dead-ending, grounding, and testing as well as adding taps |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Straight Receptacle with Test Point |
Voltage Rating | 15 to 25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
376LR-J-5260
200 Amp, 35kV, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 0.980 inch to 1.180 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 3/0 /Solid 4/0 /mmSquared 85.01.K656SR-M0410
600 Amp, 15/25kV, 600 Series Straight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 1.370 inch to 1.630 inch. Aluminum Compression Lug. Conductor Size kcmil Compressed Stranded 1000.K656SR-H2260
600 Amp, 15/25kV, 600 Series Astraight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 0.850 inch to 1.050 inch. Copper Compression Lug. Conductor Size AWG Compressed Stranded 3/0 or Compacted Solid 4/0 or mmSquared Compact 95.K656SR-G5240
600 Amp, 15/25kV, 600 Series Straight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 0.760 inch to 0.950 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded 1/0 or Compacted Solid 2/0.K656SR-L0290
600 Amp, 15/25kV, 600 Series Straight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 1.180 inch to 1.465 inch. Aluminum Compression Lug. Conductor Size kcmil Compressed Stranded 300 or Compacted Solid 350 or mmSquared Compact 150.K656SR-J2270
600 Amp, 15/25kV, 600 Series Straight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 0.980 inch to 1.180 inch. Copper Compression Lug. Conductor Size AWG Compressed Stranded 4/0 or Compacted Solid 250 kcmil or mmSquared Compact 125.K656SR-J0270
600 Amp, 15/25kV, 600 Series Straight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 0.980 inch to 1.180 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 4/0 or Compacted Solid 250 kcmil or mmSquared Compact 125.K656SR-L0320
600 Amp, 15/25kV, 600 Series Straight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 1.180 inch to 1.465 inch. Aluminum Compression Lug. Conductor Size kcmil Compressed Stranded 450 or Compacted Solid 500/550.Frequently Asked Questions
What items are included in each K656SR kit?
Each kit contains a straight receptacle housing, silicon lubricant, straight receptacle adapter, installation instructions, cable adapter, aluminum compression lug, adapter retaining ring, crimp chart, and hardware prepack.
What is the impulse withstand rating for the K656SR?
For 15kV, the impulse withstand is 95kV BIL; for 28kV, it is 140kV BIL, both at 1.2 x 50 microsecond wave.
Which industry standards does the K656SR meet?
The K656SR meets ANSI/IEEE Standard 386, Latest Revision.
Can the K656SR be connected or disconnected while energized?
The K656SR can be easily connected or disconnected only in a de-energized state.
What cable insulation diameters does the K656SR support?
The K656SR supports cable insulation diameters ranging from 0.640 inches to 1.935 inches.
What conductor sizes and types are compatible?
The K656SR product range supports #2 AWG to 1250 kcmil for aluminum and copper conductors.
What is the continuous current rating for the K656SR?
The K656SR has a continuous current rating of 600 Amps for both 15kV and 28kV voltage classes.
What are the voltage class ratings for the K656SR?
The K656SR is rated for 15kV and 28kV voltage classes. For 15kV, max phase-to-ground is 8.3kV; for 28kV, it's 16.2kV.
What is the K656SR receptacle used for?
The K656SR provides a fully shielded, submersible cable connection on 15/25kV high-voltage apparatus bushings, allowing straight cable connections on switchgear or electrical apparatus with 600 Amp bushings.
What are the voltage class ratings for the K656SR?
The K656SR is rated for 15kV and 28kV voltage classes. For 15kV, max phase-to-ground is 8.3kV; for 28kV, it's 16.2kV.
How to Install K656SR and M656SR Straight Receptacles
This guide provides step-by-step instructions for the safe installation and wiring of K656SR and M656SR straight receptacles, connecting them to standard ANSI-386 600 amp 15kV, 25kV, or 35kV bushings. Ensure all apparatus is de-energized before beginning.
Estimated time: 1h 30m
Tools needed:
5/8-11 tap, Hex wrench, Torque wrench with 15/16 socket, Wire strippers, Brush, Suitable connector
Supplies needed:
Loctite, Tape marker, No. 14 AWG copper wire or equivalent, Lubricant (supplied or ELASTIMOLD approved)
- Prepare the Apparatus Bushing
DANGER: Ensure all apparatus is de-energized. If a stud is present in the apparatus bushing, remove it and re-tap the hole using a 5/8-11 tap. Clean and lubricate the apparatus bushing and bushing converter interface. Assemble the bushing converter onto the apparatus bushing. Apply 3-4 drops of Loctite to the threads of the brass bolt. Assemble the contact adapter to the apparatus bushing, with the bolt hole facing out, using the 5/8” brass bolt. Torque the bolt to 60 ft.-lbs.
- Prepare the Cable and Install Receptacle Housing
Train the cable end and straighten it into its final position, then cut the cable squarely to ensure maximum length for crimp growth. If applicable, unwrap the concentric neutral wires a distance of 30” (76cm); DO NOT CUT them, but bend and fold them back. Wipe the outer jacket clean a distance of 38” (96.5cm) or up to the concentric neutral wires. Slide the receptacle housing onto the cable a distance of 30” (76cm). Remove the semi-con shield and install a tape marker to dimensions 10-1/4” (26.04cm) and 11-1/4” (28.58cm); DO NOT cut or nick the cable insulation. Bevel the end of the cable insulation at a 45-degree angle, approximately 1/4” (6mm) back. Thoroughly clean and lubricate the cable insulation, working toward the semi-con shield. Install the cable adapter, small end first, until it is flush with the edge of the tape marker.
- Assemble and Crimp the Conductor
Remove the protruding cable insulation by cutting it even with the end of the cable adapter; DO NOT cut or nick the cable adapter or the conductor. Verify the exposed conductor length is 4 3/4” – 5” (12.06cm-12.7cm); if not, redo the assembly. Position the holding collar over the conductor and flush against the cable adapter, then tighten the setscrew using the supplied hex wrench. Remove the protective cap from the crimp connector. If using aluminum cable wire, brush the conductor and immediately insert it into the crimp connector (which contains inhibitor), ensuring it is fully inserted. Measure the distance from the end of the connector to the holding collar; if over 7” (17.8cm), redo all previous work. Confirm components are oriented correctly: Receptacle Housing, Cable Adapter, Crimp Connector, Contact Adapter. CONFIRM the bolt hole in the crimp connector is aligned with the bolt hole in the contact adapter. Crimp the connectors following their instructions, rotating each crimp 90 degrees. After crimping, measure the distance from the end of the connector to the holding collar; if over 7” (17.8cm), redo all previous work.
- Complete Final Assembly and Grounding
Assemble the washers and bolt in the following order: Flat washer against the spade contact, Belleville washer (concave side down), then the hex-head bolt. Hand tighten. Using a torque wrench with a 15/16 socket, tighten to 50-60 ft.-lbs.; DO NOT move or reposition any part of the assembly after the bolts are tightened. Generously apply supplied lubricant or ELASTIMOLD approved lubricant to the outside of the cable adapter and the bushing adapter area; DO NOT SUBSTITUTE other lubricants. Slide the receptacle housing over the cable adapter and up to the edge of the interface. Insert the supplied nylon venting rod. Slide the receptacle housing onto the bushing converter until fully seated, then remove the venting rod. Connect a short piece of No. 14 AWG copper wire (or equivalent) to the grounding eye of the receptacle housing, forming a small loop and twisting tightly. Gather the concentric neutral wires and, using a suitable connector, connect the neutral wires and the grounding wire. For 35kV only, position the hose clamp between the locator bumps on the receptacle housing and tighten until an audible click.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.