ABB Installation Products K656CCP-M0300 25kV, 600 Amps, Combo T connecting Plug with Bus Stud, Cable Adapter and Lug Kit, No…
UPC: 075114325967
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 25kV rated for medium-voltage power distribution
- 600 Amp continuous current rating
- Aluminum lug compatible with 300-strand compressed and 400-solid/compact conductors
- Cable insulation diameter range: 1.3701-1.630 inches (34.8-41.4mm)
- Includes bus stud and cable adapter for T-connection installations
Specifications
Application | 25 kV, 600 Amps |
Material | Aluminum |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Combo-T Connecting Plug |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
755LR-H0230
600 Amp, 35kV, 600 Series Deadbreak Elbow (with Insulated Plug, Cap, Stud, Lug and Cable Adapter). Cable Insulation Diameter 0.850 inch to 1.050 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded #1/ Compacted Solid 1/0 /mmSquared Compact 50.
K655CBW-M0380-BWP
15/25kV, 600 Amp, no test point, Combo T Bushing Well with Stud, Cable Adapter and Lug Kit. Cable Insulation Diameter 1.370 inch to 1.630 inch. Aluminum Compression Lug. Conductor Size Compressed/Stranded 750 kcmil or Compacted/Solid 900 kcmil. BWP - with Bushing Well Plug.K655LINKCLRL0270BDRG
600 Amp, 25kV, Deadbreak, Cam-Op Connector Kit. Cable Insulation Diameter 1.180 inch to 1.465 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 4/0 /Compacted Solid 250 /mmSquared Compact 125. With Insulated Cap.K655YASR-H0270-S
600 Amp, 15/25KV, Straight Receptacle, cable Insulation Diameter 0.850 - 1.050 inch. Aluminum Compression Lug. Conductor Size Compressed Stranded 4/0 AWG or Compact Solid 250 kcmil. Includes Cold-Shrinkable Jacket Seal.Frequently Asked Questions
What is a critical safety step before ComboT installation?
The system must be de-energized before initiating any ComboT installation. Always refer to the complete instruction sheet.
What is a critical safety step before ComboT installation?
The system must be de-energized before initiating any ComboT installation. Always refer to the complete instruction sheet.
What tools are needed for ComboT installation?
ComboT connectors install with standard assembly tools and use a standard 600 or 900 series stud.
How much does the ComboT reduce stack height?
Each combination elbow/connecting plug reduces the stack height by 2.67 inches.
What are the voltage ratings for CETP connectors?
CETP connectors are available for 15 kV and 25 kV voltage classes.
What is the continuous current rating for CETP?
CETP connectors have continuous current ratings of 600 A for deadbreak and 200 A for loadbreak interfaces, or 900 A for 900A deadbreak.
What is the maximum phase-to-phase operating voltage for CCP?
The maximum phase-to-phase operating voltage for CCP and CBW connectors is 28.0 kV.
What are the continuous current ratings for CCP and CBW?
CCP and CBW connectors have continuous current ratings of 600 A or 900 A.
What stud size is used for ComboT assembly?
ComboT connectors utilize a standard 5/8 in–11 stud that threads into the equipment bushing.
What are the voltage ratings for CETP connectors?
CETP connectors are available for 15 kV and 25 kV voltage classes.
How to Install K655/K656CCP Deadbreak Elbow Connectors
This guide provides instructions for preparing high voltage cable and installing K655/K656CCP Deadbreak Elbow Connectors to ensure fully shielded and submersible connections to apparatus.
Estimated time: 1h 30m
Tools needed:
Crimp tool, 600 ATM assembly tool, Hotstick (for K656CCP), Suitable voltage sensing device (for K656CCP), Wire brush (for aluminum conductors), Wire strippers, Measuring tape
Supplies needed:
K655/K656CCP Elbow Connector Kit (includes Elbow, Cable Adapter, Connector, Stud, Compression Lug, Lubricant), Grounding wire (min. No. 14 AWG Copper), Vinyl plastic tape (if applicable), Tape retainer/marker (if applicable), Silicone grease (for K656CCP test point cap)
- Prepare for Installation and Position Cable
DANGER: Ensure all apparatus is de-energized during installation or removal. All deadbreak connectors must be de-energized before operating. Position the cable so it is in its final assembled position with enough slack to allow for elbow removal. For concentric neutral cable, unwind the neutral wires. Cut the cable 1-3/4” (45mm) from the centerline of the mating product.
- Prepare the Cable Insulation and Shield
Clean the outer surface of the cable. Remove the outer jacket to 12 3/4" (324mm). Prepare the shield wires, metallic tape, fabric tape, corrugated shield, or semi-con shield according to your cable type and specified dimensions. Bevel the end of the cable insulation at a 45-degree angle, approximately 1/4" (6mm) back. Thoroughly clean and lubricate the cable insulation. Install the cable adapter, small end first, until it is flush with the edge of the tape marker. Remove the protruding cable insulation, cutting it even with the end of the cable adapter, ensuring the exposed conductor length is 4 3/8”---4 11/16” (111mm---119mm).
- Crimp the Compression Lug
For copper conductors, fully insert the conductor into the compression lug. For aluminum conductors, wire brush the conductor immediately before fully inserting it into the lug. Measure the “Check Dimension” before crimping; it must be less than 6 1/2” (165mm). Crimp the compression lug following the instructions supplied with the lug. Wipe all excess inhibitor from the lug and cable adapter surface after crimping. Verify the distance from the end of the compression lug to the cable adapter is 6 1/2”---7 1/4” (165mm ---184mm).
- Install the Elbow onto the Cable Adapter
Lubricate the cable adapter and the inside of the elbow's cable entrance. Install the elbow onto the cable adapter until it cannot advance further. Ensure the cable adapter remains flush with the tape marker. If not, reposition the cable adapter. Remove the tape marker.
- Connect the Elbow to the Mating Product
DANGER: DO NOT CONNECT OR DISCONNECT MATING PRODUCTS WHILE ENERGIZED. DO NOT ENERGIZE WHILE DISCONNECTED. Remove protective caps from the elbow and the mating part. Install the stud in the mating part. Clean and lubricate both the elbow and the mating part with the supplied lubricant. Push the elbow onto the mating part. Using the 600 ATM assembly tool, thread the connector into the mating part until it bottoms. Apply 50 to 60 foot-pounds of torque.
- Ground the Cable Shield
Insert one end of a grounding wire with ampacity at least equivalent to No. 14 AWG Copper through the grounding eye and twist to make a small loop, ensuring not to damage the eye. Connect this wire to ground using a suitable connector. The shield of the cable must be grounded according to the instructions supplied with any grounding device, or through an alternate method if no device is used. It is also recommended to waterproof the cable jacket at this point to prevent moisture ingress.
- Perform Voltage Test (K656CCP Only)
For K656CCP only: Remove the test point cap with a hotstick, peeling it off at an angle rather than pulling directly. WARNING: The voltage test point is a capacitance device and is NOT directly connected to the conductor. Do not use conventional voltage measuring equipment. Test with a suitable sensing device made for capacitive test points. Treat the elbow as energized until a “no voltage” indication is confirmed by other means, as contamination, moisture, dirt, or incorrect equipment can provide a false reading. After voltage detection, clean and lubricate the inside surface of the cap with silicone grease and replace it on the test point.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.