ABB Installation Products K151SR-C0260 200 Amp, 15/25kV, Deadbreak Elbow, Straight Receptacle, Bails are required but not…
UPC: 783786844845
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 200 Amp continuous current rating with 10kA symmetrical momentary rating
- Supports 15kV and 25kV voltage classes per ANSI/IEEE Standard 386
- Accommodates cable insulation diameters from 0.805" to 1.060"
- Compatible with compressed stranded 3/0 AWG or solid 4/0 AWG conductors (85.01 mm²)
- Fully shielded, submersible molded rubber housing with EPDM materials
Specifications
Amperage Rating | 200 A |
Application | Designed to connect a cable to another cable or apparatus |
Color | Black |
Conductor Range | 3/0 STR/COMPR AWG , 4/0 SOL/COMPT AWG |
Connection Type | Deadbreak Elbow, Straight Receptacle |
Current Rating | 200 A |
Environmental Conditions | Fully Shielded, Fully Submersible |
Insulation | True |
Length | 9.54 in |
Length | 242.316 mm |
Material | Aluminum Compression Lug |
Material | Housing - EPDM-Rubber |
Series | K151SR |
Size | Cable Insulation Diameter 0.805 inch to 1.060 inch |
Special Features | Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provision for ground wire connection. Wide cable range with minimum number of sizes. No Test Point |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Straight Receptacle |
Voltage Rating | 15 to 25 kV |
Voltage Rating | 15/25kV |
Width | 2.74 in |
Width | 69.596 mm |
Package Dimensions (L x W x H) | 19 IN x 8.5 IN x 12.5 IN |
Package Dimensions (L x W x H) | 48.26 cm x 21.59 cm x 31.75 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
376LR-J-5260
200 Amp, 35kV, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 0.980 inch to 1.180 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 3/0 /Solid 4/0 /mmSquared 85.01.K151SR-A0250
200 Amp, 15/25kV, Deadbreak Elbow, Straight Receptacle, Bails are required but not included, order separately. Cable Insulation Diameter 0.575 inch to 0.740 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 2/0 or Solid 3/0 or mmSquared 67.43.376LR-L-5270-S
200 Amp, 35kV, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 1.180 inch to 1.465 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67. 200ECS Jacket Seal Included.
167RLR-G5230-S
200 Amp, 15kV, Loadbreak Replacement Elbow Connector without Test Point, Cable Insulation Diameter 0.760 inch to 0.950 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded #1/Solid 1/0 /mmSquared 42.41. Repair Elbow has extended length contact and elbow housing resulting in a net gain of 8-7/8 inches in length. Includes 00400X long Bi-Metal Contact. 200ECS Jacket Seal Included.
K151SP-C2250
200 Amp, 15/25kV, Deadbreak Elbow, Straight Plug, Bails are required but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Copper Compression Lug, Conductor Size AWG Compressed Stranded 2/0 /Solid 3/0 /mmSquared 67.43.
274ELR-88110-5250
200 Amp, 25kV, Loadbreak Repair Elbow Connector with Test Point, Repair Elbow has extended length contact and elbow housing resulting in a net gain of 3-1/4 inches in length. Includes 02509X long Bi-Metal Contact. Cable Insulation Diameter 0.880 inch to 1.100 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 2/0 /Solid 3/0 /mmSquared 67.43.
274FLR3-B0240
Molded Current Limiting Fuse Housing, Nominal Fuse Voltage Rating 17.2kV, Fuse Test Port - Two Capactive Test Ports, Large Housing, Cable Insulation Diameter 0.635 inch - 0.905 inch / 16-23mm, Aluminum Conductor size 1/0 AWG Stranded Compressed, 2/0 AWG Solid Compact
274FLR3-B0250
Molded Current Limiting Fuse Housing, Nominal Fuse Voltage Rating 17.2kV, Fuse Test Port - Two Capactive Test Ports, Large Housing, Cable Insulation Diameter 0.635 inch - 0.905 inch / 16-23mm, Aluminum Conductor size 2/0 AWG Stranded Compressed, 3/0 AWG Solid CompactFrequently Asked Questions
What is the maximum cable insulation diameter supported?
The ABB K151SR-C0260 deadbreak elbow receptacle supports cable insulation diameters ranging from 0.805 inch to 1.060 inch.
What conductor sizes are compatible with this receptacle?
This receptacle is compatible with compressed stranded conductors from 3/0 AWG (85.01 mm²) up to 4/0 AWG (85.01 mm²) or solid conductors up to 4/0 AWG.
Are bails included with the deadbreak elbow receptacle?
No, bails are required for installation but are not included with the K151SR-C0260. They must be ordered separately.
What is the voltage rating of this ABB deadbreak elbow?
The ABB K151SR-C0260 deadbreak elbow receptacle has a voltage rating of 15/25kV.
What type of lug is used for conductor connection?
The K151SR-C0260 utilizes an aluminum compression lug for secure conductor termination.
How to Install the Elastimold 151SR/K151SR Straight Receptacle
This guide provides step-by-step instructions for installing the Elastimold 151SR/K151SR Straight Receptacle, including cable preparation, conductor crimping, and connection to mating products. Ensure all apparatus are de-energized before starting.
Estimated time: 1h 30m
Tools needed:
Wire strippers, Cable cutting tools, Wire brush, Crimp tool, Rag, Approved solvent, Multimeter
Supplies needed:
Elastimold 151SR/K151SR Straight Receptacle, Conductor Contact (male), Lubricant (supplied), Nylon Venting Rod (supplied), Solid dielectric type cable, Silicone grease, #14 AWG (or equivalent) copper wire (for grounding), Sealing material (for grounding connections), Elastimold insulating plug (K150DP, optional), Elastimold bail, Inhibitor (typically pre-applied in crimp barrel)
- Safety First: De-energize and Inspect
Before beginning, ensure all apparatus are de-energized. Inspect all parts for damage, correct rating, and compatibility with mating products. This installation must only be performed by competent personnel trained in high-voltage safety practices. Failure to follow these instructions will result in damage to the product and serious or fatal injury.
- Prepare the Cable Jacket
For Jacketed Concentric Neutral cable, cut and remove the cable jacket 8 inches from the end, ensuring sufficient neutral wires for grounding. For Copper Tape Shield cable, cut and remove the jacket 7 1/2 inches from the end, then remove the copper tape shield 6 1/2 inches from the end. Follow specific instructions if using an ECS or MA grounding device for outer jacket cut back.
- Prepare Conductor Insulation and Shield
Remove 7/8 inch to 1 inch of cable insulation and conductive shield. For #1 stranded/compressed and #1/0 compressed/solid aluminum cable, remove 1 3/4 inches to 1 7/8 inches. Cut squarely, avoiding penciling. Wire brush bare aluminum conductors and immediately insert them into the crimp barrel, which contains inhibitor.
- Crimp the Socket Terminal
Crimp the socket terminal onto the bared conductor, ensuring it remains fully seated. Refer to the crimp chart provided with the contact. Start crimps at the imprinted crimp line and rotate each successive crimp or indent 90 degrees. If using aluminum cable, carefully wipe any excess inhibitor from the contact and cable insulation.
- Prepare and Clean Cable Insulation
Remove the semi-conductive shield 7 9/16 inches to 7 5/8 inches back from the end of the pin with a straight, smooth, squared cut, taking care not to cut or nick the insulation. Pencil the insulation 1/8 inch. Clean the outer jacket and thoroughly clean the insulation with a rag wet with an approved solvent, wiping from the cable end toward the outer jacket to remove all semi-conducting residue. Install an ECS or MA grounding device now if applicable.
- Lubricate and Insert Cable into Receptacle
Remove the protective cap from the straight receptacle, keeping the cable insulation and receptacle clean. Apply the supplied lubricant sparingly to the cable and the inside of the housing. Do not use substitute lubricants, as others may be harmful. Push the cable into the housing until the base of the pin chamfer is flush with the inside face of the receptacle. If not connecting immediately, replace with an Elastimold insulating plug (K150DP) as the shipping cover is not an insulating device.
- Connect to Mating Plug
Lubricate the nose of the mating plug with silicone grease. Insert the supplied nylon rod into the receptacle face until it bottoms (approx. 1 3/4 inches), ensuring it is not cut. Insert the plug assembly into the receptacle as far as possible, then pull out the nylon rod. Secure the electrical connection with an Elastimold bail. A bailing arrangement is required when this product is used with any mating Elastimold deadbreak product.
- Ground the Cable
If an ELASTIMOLD grounding device is not being used, connect a length of customer-supplied #14 AWG (or equivalent) copper wire through the grounding tab and twist tightly. Connect this grounding assembly to the system ground by merging it with the cable shield of each cable. Seal the grounding wires and connections to prevent corrosion.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.