Contact for Pricing
Overview
- 5-point junction box with 2x200 Amp and 3x600 Amp bushing well interfaces
- Rated for 15kV service, compatible with standard 15kV class terminations
- Right-hand parking stand configuration for organized cable routing
- Corrosion-resistant construction for outdoor and industrial environments
- Part of ABB Installation Products line, compliant with ANSI/IEEE C57.12.28
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Connection Type | Bushing Well Interfaces |
Current Rating | 200 A / 600 A |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | Right Parking Stand |
Mounting Type | Right Parking Stand Only |
Series | 5 Point Junction |
Size | Overall Length 24.5 inches, Width 6.75 inches |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 5 Points |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
J6-222666-15L
15kV, 200/600 Amp Multipoint Junction. 6-Points, Three 200 Amp Bushing Well Interfaces, Three 600 Amp Bushing Interfaces, 15 kV, Standard 4 inch Spacing, Left Parking Stand Only
J6-222226-15-N
6 Point Junction, with five 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, No-parking standJ5-22222-15-SV-TMA
5 Point Junction, with five 200 Amp Bushing Well Interfaces, 15kV, 6-1/2 inch centers. Tilt Mounting Adapter.J6-266662-25-R
6 Point Junction, with one 200 Amp Bushing Well Interfaces, four 600 Amp Bushing Interface and one 200 Amp Bushing Well Interface, 25kV, Right Parking Stand OnlyJ5-66666-15-SV
15kV, Multi-Port Junction, 5 Points, Five 600 Amp Bushing Interfaces, Optional Spacing - 6-1/2 inch Centers, No Tilt Mounting
J2-66-35
35kV, 600 Amp, Multi-Port Junction, 2 Points, 2 X 600 Amp Bushing Interfaces, No Tilt Mounting, Standard Spacing - 4 inch CentersJ6-666666-15-N
25kV, Multi-Port Junction, 6 Points, Six 600 Amp Bushing Interface, Standard Spacing - 4 inch Centers, No Parking StandFrequently Asked Questions
What are the typical applications for these junctions?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications, used for sectionalizing, looping, tapping, and equipment bypass.
What connectors are compatible with this junction?
It provides mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp.
What interface options and spacings are available?
Units offer modular design flexibility, allowing 200A deepwell or 600A bushing interfaces with 4 in or 6.5 in spacing.
What are the voltage and current ratings?
The junction is rated for 15/25/35kV and 200/600 Amp.
What is the maximum operating voltage for 15kV class?
For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV.
What is the BIL rating for the 25kV class?
The 25kV voltage class has a 140kV BIL impulse withstand rating.
What is the momentary and fault close rating for 600 Amp?
For 600 Amp, the momentary and fault close rating is 25kA Sym for 10 cycles.
What is the momentary and fault close rating for 200 Amp?
For 200 Amp, the momentary and fault close rating is 10kA Sym for 10 cycles.
What is the maximum operating voltage for 35kV class?
For the 35kV voltage class, the maximum phase-to-ground operating voltage is 21.1kV.
What items are included in each kit?
Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.
How to Install a 15/25/35kV Deadbreak Junction (Universal Mount)
This guide provides step-by-step instructions for installing a 15/25/35kV, 600/900 Ampere Deadbreak Junction using the universal mount method. It covers mounting, assembly, grounding, and initial preparation. Ensure all apparatus is de-energized during installation.
Estimated time: 1h
Tools needed:
Wrench, Wire strippers, Marking tool
Supplies needed:
Deadbreak Junction, Base Bracket, Base Plate, Universal Brackets (4), Mounting Hardware Prepack (screws, washers, nuts), Suitable fasteners (user supplied), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated cap(s) or connector(s)
- Determine Mounting Location and Mark Slots
Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark the slot locations. Ensure the mounting surface is flat and suitable for the installation.
- Attach Initial Universal Brackets
Attach two universal brackets to the flat surface using suitable fasteners. Tighten them securely to prevent movement during operation. DANGER: Ensure all apparatus is de-energized before starting installation to prevent serious injury.
- Attach Remaining Universal Brackets
Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle using the supplied hardware (3/8” Hex Head Cap Screw, Ext. Tooth Lock Washer, 3/8” Hex Nut). Tighten securely.
- Assemble Deadbreak Junction to Base Bracket and Base Plate
Assemble the deadbreak junction to the base bracket assembly and base plate using two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts. Attach them to the center mounting holes on the bracket assembly and tighten securely.
- Attach Junction Assembly to Universal Brackets
Attach the assembled deadbreak junction to the universal brackets using the supplied hardware (1/2” Split Lock Washer, 1/2” Hex Nut, 1/2” Hex Head Cap Screw). Ensure the parking stand is in the upright position and tighten securely.
- Ground the Assembly
Ground the base bracket assembly and the junction’s black conductive jacket. A grounding lug is provided on the base bracket for this purpose, accommodating wire sizes from No. 2 solid to 1/0 stranded. Verify proper grounding before proceeding to the next steps.
- Prepare Operating Interfaces
Remove all protective shipping caps and clean the operating interfaces. Lubricate each interface with an ELASTIMOLD approved lubricant. Do not substitute other lubricants, as they may harm the product or its mating parts. Inspect all parts for damage, rating, and compatibility with mating parts.
- Install Insulated Caps on Unused Bushings
If not all operating interfaces are utilized, install appropriate HV insulated caps or connectors on the unused bushing(s) before energizing the circuit. Do not use the protective shipping caps for this function as they are not insulated. DANGER: Ensure all deadbreak connectors are de-energized before operating.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.