Contact for Pricing
Overview
- 6-point junction box with 25 kV voltage rating
- Supports 200 A and 600 A current ratings
- One 200 A and four 600 A bushing well interfaces
- Right parking stand-only mounting for space efficiency
- Designed for medium-voltage power distribution systems
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | Right Parking Stand |
Size | Overall Length 28.5 inches, Width 6.75 inches |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 6 Points |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
J4-6226-15
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.
J5-66666-15-SV
15kV, Multi-Port Junction, 5 Points, Five 600 Amp Bushing Interfaces, Optional Spacing - 6-1/2 inch Centers, No Tilt Mounting
J2-66-35
35kV, 600 Amp, Multi-Port Junction, 2 Points, 2 X 600 Amp Bushing Interfaces, No Tilt Mounting, Standard Spacing - 4 inch CentersJ6-666666-15-N
25kV, Multi-Port Junction, 6 Points, Six 600 Amp Bushing Interface, Standard Spacing - 4 inch Centers, No Parking StandJ5-22226-15-N
15kV, Multi-Port Junction, 5 Points, Four 200 Amp Bushing Well Interfaces, and One 600 Amp Bushing Interface, No Parking Stand, Standard Spacing - 4 inch CentersJ6-622226-35-TMA
35 kV, 6 Pont Multi-Point Junction, 1 X 600 Amp Bushing Interface, 4 X 200 Amp Bushing Well Interface, 1 X 600 Amp Bushing Interface, Standard Spacing on 4 inch Centers, Tilt Mounting AdapterJ6-222622-25
25kV, Multi-Port Junction, 6 Points, Three 200 Amp Bushing Well Interfaces, One 600 Amp Bushing Interface, Two 200 Amp Bushing Well Interfaces, Standard Spacing - 4 inch Centers, No Tilt MountingFrequently Asked Questions
What are the typical applications for ELASTIMOLD junctions?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications, used for sectionalizing, looping, tapping, and equipment bypass.
What types of connectors are compatible with this junction?
The junction provides mating for Elastimold Elbow connectors, supporting both 600 Amp and 200 Amp types.
What interface options and spacings are available?
Units offer modular design flexibility with 200A deepwell or 600A bushing interfaces, available with 4'' or 6.5'' spacing.
What are the voltage and current ratings of the junction?
The junction is rated for 15/25/35kV voltage classes and continuous current ratings of 200 Amp or 600 Amp.
What is the maximum operating voltage for the 15kV class?
For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV.
What are the momentary and fault close current ratings?
For 600 Amp, it's 25kA Symmetrical for 10 cycles; for 200 Amp, it's 10kA Symmetrical for 10 cycles.
What is the maximum operating voltage for the 25kV class?
For the 25kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV.
What items are included in a standard junction kit?
Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.
Does the product comply with any industry standards?
Yes, the product meets ANSI/IEEE Standard 386, Latest Revision.
What is the maximum operating voltage for the 35kV class?
For the 35kV voltage class, the maximum phase-to-ground operating voltage is 21.1kV.
How to Install J6-266662-25-R Deadbreak Junction with Universal Mount
This guide provides detailed instructions for installing the J6-266662-25-R Deadbreak Junction using the Universal Mount method. It covers determining the mounting location, assembling the brackets, securing the junction, and grounding the assembly. Ensure all apparatus are de-energized before beginning installation to prevent serious injury or fatality.
Estimated time: 45m
Tools needed:
Wrench set (for 3/8" and 1/2" hex fasteners), Wire strippers, Marking tool, Drill (if required by suitable fasteners)
Supplies needed:
J6-266662-25-R Deadbreak Junction (includes Base Bracket, Base Plate, 4 Universal Brackets, Mounting Hardware Prepack), Suitable fasteners (for mounting universal brackets to surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated cap(s) or connector(s) (for unused interfaces)
- Determine Mounting Location
Determine the desired location for the junction assembly. Using the base plate as a template, place it on the mounting surface and mark all slot locations.
- Mount Initial Universal Brackets
Attach two (2) universal brackets to the flat surface using suitable fasteners. Tighten securely to ensure no movement during operation.
- Assemble Remaining Universal Brackets
Attach the remaining two (2) universal brackets to the two (2) universal brackets already mounted on the surface at the desired angle using the supplied hardware. Tighten securely.
- Attach Junction to Base Bracket Assembly
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two (2) 1/2” hex head cap screws, two (2) 1/2” split lock washers, and two (2) 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten securely.
- Secure Junction Assembly to Universal Brackets
Attach the deadbreak junction assembly to the universal brackets using the supplied hardware. Tighten securely. Ensure the parking stand is in the upright position.
- Ground the Junction Assembly
The base bracket assembly and the junction’s black conductive jacket must be grounded. A grounding lug is provided on the base bracket for this purpose. Connect a grounding wire (No. 2 solid to 1/0 stranded) to this lug and ensure it is properly grounded.
- Prepare Operating Interfaces
Remove all protective shipping caps from the operating interfaces and clean them thoroughly. Lubricate each interface with an ELASTIMOLD approved lubricant. DO NOT SUBSTITUTE, as other lubricants may be harmful to this product or its mating product(s).
- Install Insulated Caps on Unused Interfaces
If not all operating interfaces are utilized, appropriate HV insulated caps must be installed on the unused bushing(s) before energization. Do not use the protective shipping caps for this function, as they are not insulated and are only intended to keep the operating interfaces clean during handling and installation.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.