Authorized ABB Distributor (Installation Products)
ABB - Installation Products J4-6226-35 - 4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 35kV, No Tilt Mounting.

ABB Installation Products J4-6226-35 4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing…

UPC: 783786669684


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB J4-6226-35 is a 4-point junction designed for 35kV electrical systems. This unit features a versatile interface configuration, incorporating two 600 Amp bushing interfaces and two 200 Amp bushing well interfaces. This specific arrangement allows for flexible connection points within a high-voltage distribution network. The junction is built for reliable operation in electrical substations and industrial power distribution systems where precise power management and connectivity are essential. Its construction supports the safe and efficient termination of multiple power cables. The absence of tilt mounting simplifies installation in standard configurations. This ABB Installation Products component, SKU J4-6226-35, is engineered to facilitate the interconnection of primary power circuits, supporting critical infrastructure. The unit's rating of 35kV signifies its suitability for medium-voltage applications. The inclusion of both 200 Amp and 600 Amp interfaces provides adaptability for varying load requirements and equipment connections within a substation or industrial facility. This product is a key component for ensuring the integrity and functionality of electrical distribution networks.
  • 4-point junction for 35kV systems
  • Includes two 600 Amp bushing interfaces
  • Includes two 200 Amp bushing well interfaces
  • No tilt mounting design
  • Manufacturer: ABB - Installation Products

Specifications

Application
Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass
Connection
Push-In
Current Rating
200 A, 600 A, 200 A
Material
EPDM-Rubber and Stainless Steel Mounting Brackets
Mounting
No Tilt Mounting Bracket
Mounting Type
No Tilt Mounting
Size
Overall Length 23 inches, Width 6-3/4 inches
Special Features
4 inch Center Spacing
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Multi-Point Junction - 4 Points
Voltage Rating
35 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
20.8800 L
Package Weight (Metric)
9.4710 kg
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 35kV, No Parking Stand.

J4-2266-35-N

4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 35kV, No Parking Stand.
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 25kV, No Tilt Mounting.

J4-6226-25

4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 25kV, No Tilt Mounting.
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 25kV, Right Parking Stand.

J4-6226-25-R

4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 25kV, Right Parking Stand.
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 25kV, No Parking Stand.

J4-6226-25-N

4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 25kV, No Parking Stand.
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.

J4-6226-15

4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, Tilt Mounting Adapter.

J4-6226-15-TMA

4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, Tilt Mounting Adapter.
Multi-Point Junction - 5 Points. 15kv, (5) 200-Amp Bushing Well Interfaces. Any Customer Modification - CS1185 - 600/200 Amp junction with short bracket, no parking stands and bushing inserts installed. (1601A4(1) inserts installed).

J5-22222-15-CS1185

Multi-Point Junction - 5 Points. 15kv, (5) 200-Amp Bushing Well Interfaces. Any Customer Modification - CS1185 - 600/200 Amp junction with short bracket, no parking stands and bushing inserts installed. (1601A4(1) inserts installed).
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 25kV, No Parking Stand.

J3-266-25-N

3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 25kV, No Parking Stand.

Frequently Asked Questions

What interface options and spacings are available?

Units offer 200A deepwell or 600A bushing interfaces, available with 4'' or 6.5'' spacing.

What items are included in each junction kit?

Each kit includes a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.

What are the primary applications of these junctions?

They can be used for sectionalizing, looping, tapping, and equipment bypass.

Where can these junctions be installed?

ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications.

What connectors are compatible with this junction?

The junction provides mating for both 600 Amp and 200 Amp Elastimold Elbow connectors.

What is the maximum operating voltage for the 15kV class?

For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV.

What are the continuous current ratings?

The continuous current ratings are either 600 Amp or 200 Amp.

What are the voltage and current ratings of the junction?

The junction is rated for 15/25/35kV voltage classes and 200 Amp or 600 Amp continuous current.

What are the momentary and fault close ratings?

For 600 Amp, it's 25kA Sym for 10 cycles; for 200 Amp, it's 10kA Sym for 10 cycles.

How many points are available for the junction?

The junction is available with 2, 3, 4, 5, or 6 points.

How to Install the J4-6226-35 Deadbreak Junction (Universal Mount)

This guide provides step-by-step instructions for installing the J4-6226-35 Deadbreak Junction using the Universal Mount method. It covers mounting, assembly, grounding, and initial preparation for operation. Ensure all apparatus is de-energized before starting.

Estimated time: 1h

Tools needed:

Wrench/Socket Set, Drill (if needed for mounting holes), Wire Strippers, Multimeter/Voltage Tester, Torque Wrench

Supplies needed:

Suitable Fasteners (for mounting to surface), Mounting Hardware Prepack (includes screws, washers, nuts), Grounding Wire (No. 2 solid to 1/0 stranded), ELASTIMOLD Approved Lubricant, HV Insulated Caps (for unused bushings)

  1. De-energize Apparatus and Ensure Safety

    Before beginning installation, ensure all apparatus is de-energized and verified with appropriate testing equipment. This product should only be installed by competent personnel trained in high voltage electrical equipment safety practices. Failure to follow these instructions will result in serious or fatal injury.

  2. Determine Mounting Location and Mark

    Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark the slot locations for drilling or fastener placement.

  3. Mount Initial Universal Brackets

    Attach two universal brackets to the marked flat surface using suitable fasteners. Tighten them securely to prevent any movement during operation.

  4. Assemble Remaining Universal Brackets

    Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle using the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten securely.

  5. Assemble Deadbreak Junction to Base Bracket

    Assemble the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten securely.

  6. Attach Junction Assembly to Universal Brackets

    Attach the complete deadbreak junction assembly to the universal brackets using the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten securely.

  7. Ground the Junction Assembly

    Ground the base bracket assembly and the junction’s black conductive jacket. A grounding lug is provided on the base bracket, accommodating wire sizes from No. 2 solid to 1/0 stranded. Connect a suitable grounding wire and secure it firmly.

  8. Prepare Operating Interfaces

    Remove any protective shipping caps and thoroughly clean all operating interfaces. Lubricate each interface with an ELASTIMOLD approved lubricant. Do not substitute with other lubricants, as they may harm the product or its mating parts.

  9. Install Insulated Caps

    If not all operating interfaces will be utilized immediately, install appropriate HV insulated caps on any unused bushings before energizing the circuit. Do not use the protective shipping caps for this purpose, as they are not insulated.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.