ABB Installation Products J3-226-35 3 Point Junction, with two 200 Amp Bushing Well Interfaces and one 600 Amp Bushing…
UPC: 783786672387
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 35kV-rated 3-point junction for medium-voltage distribution systems
- Two 200 Amp and one 600 Amp bushing well interfaces for versatile connections
- Supports 200-ampere loadmake/break operation with 10kA symmetrical momentary rating
- Fully shielded, fully submersible, separable insulated assembly for energized operation
- Universal mounting hardware with 0° to 90° tilt adjustment in 15° increments
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Connection Type | Bushing Well Interfaces |
Current Rating | 200 A / 600 A |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Material | Insulated Assembly |
Mounting | No Tilt Mounting Bracket |
Mounting Type | No Tilt Mounting |
Poles | 3 |
Series | J3 |
Size | Overall Length 19 inches, Width 6-3/4 inches |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 3 Points |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
J6-622226-25
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.J3-626-15-N
3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 15kV, No Parking Stand.J3-266-35
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 35kV, No Tilt Mounting.
J4-6266-25
4 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well interface and two 600 Amp Bushing Interfaces, 25kV, No Tilt Mounting.J3-226-15-N
3 Point Junction, with two 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, No Parking Stand.J3-266-25-R
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 25kV, Right Parking Stand.Frequently Asked Questions
What are the voltage classes available for this product?
The product is available in 15kV, 25kV, and 35kV voltage classes.
What are the momentary and fault close ratings for 600 Amp?
For 600 Amp continuous, the momentary and fault close rating is 25kA Sym for 10 Cycles.
What is included in a standard junction kit?
Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.
How many points can the junction have?
The junction can have 2, 3, 4, 5, or 6 points.
What is the purpose of 304 stainless steel in the design?
304 stainless steel is utilized for brackets to prevent rusting and corrosion.
What are the available interface spacing options?
Units feature a modular design allowing selection of 200A deepwell or 600A bushing interfaces with 4 inches or 6.5 inches spacing.
What is the maximum operating voltage for the 25kV class?
For the 25kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV.
What types of connectors are compatible with the junction?
The junction provides mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp.
What standards do these junctions meet?
The junctions meet ANSI/IEEE Standard 386, Latest Revision.
What materials are used for the housing and brackets?
The product features a fully shielded, fully submersible molded rubber housing with 100% peroxide-cured EPDM materials. Brackets utilize 304 stainless steel.
How to Install the J3-226-35 Deadbreak Junction (Universal Mount)
This guide provides step-by-step instructions for installing the J3-226-35 deadbreak junction using the universal mount configuration. It covers mounting, assembly, and grounding procedures for safe operation, emphasizing de-energization before work.
Estimated time: 1h
Tools needed:
Wrench set (for 3/8" and 1/2" hex nuts/screws), Wire strippers, Marking tool, Drill
Supplies needed:
Suitable fasteners (for mounting brackets to surface), Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (if not all interfaces are used)
- Prepare Mounting Surface and Mark Locations
DANGER: All apparatus must be de-energized during installation or removal of part(s). Ensure the mounting surface is de-energized and safe for work. Using the base plate as a template, position it at the desired junction location and mark all four slot locations for the universal brackets.
- Install Initial Universal Brackets
Secure two universal brackets to the marked slot locations on the mounting surface using suitable fasteners. Tighten them securely to prevent any movement during operation.
- Assemble Remaining Universal Brackets
Attach the remaining two universal brackets to the two brackets already mounted on the surface at the desired angle. Use the supplied 3/8” hex head cap screws, external tooth lock washers, and 3/8” hex nuts. Tighten all hardware securely.
- Attach Junction to Base Assembly
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten securely.
- Mount Junction Assembly to Brackets
Attach the complete deadbreak junction assembly (with base bracket and base plate) to the universal brackets previously installed on the surface. Use the supplied 1/2” hex head cap screws, 1/2” split lock washers, and 1/2” hex nuts. Ensure the parking stand is in the upright position and tighten all hardware securely.
- Ground the Junction Assembly
Connect a grounding wire (No. 2 solid to 1/0 stranded) to the grounding lug provided on the base bracket. Ensure the base bracket assembly and the junction’s black conductive jacket are properly grounded according to local and national electrical codes.
- Prepare for Operation
Remove all protective shipping caps and clean the operating interfaces. Lubricate each interface with an ELASTIMOLD approved lubricant. If any operating interfaces are not utilized, install appropriate HV insulated caps before energization. Do not use shipping caps for this purpose.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.