ABB Installation Products J3-266-35 3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing…
UPC: 075114166263
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 35kV rated for medium-voltage applications
- One 200 Amp and two 600 Amp bushing interfaces
- No-tilt mounting for simplified installation
- Compatible with standard cable terminations
- Part of ABB Installation Products line
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Current Rating | 200 A, 600 A |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | No Tilt Mounting Bracket |
Mounting Type | No Tilt Mounting |
Size | Overall Length 19 inches, Width 6-3/4 inches |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 3 Points |
Voltage Rating | 35kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
J4-2266-35-N
4 Point Junction, with two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing interfaces, 35kV, No Parking Stand.
J4-6266-25
4 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well interface and two 600 Amp Bushing Interfaces, 25kV, No Tilt Mounting.J3-226-15-N
3 Point Junction, with two 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 15kV, No Parking Stand.J3-266-25-R
3 Point Junction, with one 200 Amp Bushing Well Interface and two 600 Amp Bushing Interface, 25kV, Right Parking Stand.J4-6226-15-R
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, Right Parking Stand.J4-6226-15-SV
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, 6-1/2 inch centers. No Tilt Mounting.J4-2666-15-N
4 Point Junction, with one 200 Amp Bushing Well Interface and three 600 Amp Bushing interfaces, 15kV, No Parking Stand.J4-2666-25-SV
4 Point Junction, with one 200 Amp Bushing Well Interface and three 600 Amp Bushing interfaces, 15kV, 6-1/2 inch centers. No Tilt Mounting.Frequently Asked Questions
What are the primary applications for these junctions?
ELASTIMOLD junctions are designed for subsurface, vault, or padmount applications. They can be used for sectionalizing, looping, tapping, and equipment bypass.
What are the available interface spacing options?
Units feature a modular design allowing selection of 4'' or 6.5'' spacing for interfaces.
What items are included in a standard kit?
Each kit contains a basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and a protective cap.
What standards do these junctions meet?
The junctions meet ANSI/IEEE Standard 386, Latest Revision.
What is the maximum operating voltage for a 35kV class junction?
For a 35kV voltage class junction, the maximum phase-to-ground operating voltage is 21.1kV.
What is the maximum operating voltage for a 25kV class junction?
For a 25kV voltage class junction, the maximum phase-to-ground operating voltage is 16.2kV.
What is the maximum operating voltage for a 15kV class junction?
For a 15kV voltage class junction, the maximum phase-to-ground operating voltage is 8.3kV.
What connectors are compatible with these junctions?
These junctions provide mating for Elastimold Elbow connectors, both 600 Amp and 200 Amp.
What materials are used for corrosion prevention?
The construction includes 100% peroxide-cured EPDM materials, and 304 stainless steel is used for brackets to prevent rusting and corrosion.
What type of housing does the junction use?
The junction features a fully shielded, fully submersible molded rubber housing.
How to Install a Deadbreak Junction with Universal Mount
This guide provides step-by-step instructions for installing a two-, three-, or four-point deadbreak junction (J3-266-35) using the universal mount method, including initial setup, grounding, and preparing operating interfaces. All apparatus must be de-energized during installation.
Estimated time: 1h
Tools needed:
Wrench set, Wire strippers
Supplies needed:
Suitable fasteners (for mounting brackets to surface), 3/8" Hex Head Cap Screws, 3/8" Ext. Tooth Lock Washers, 3/8" Hex Nuts, 1/2" Hex Head Cap Screws, 1/2" Split Lock Washers, 1/2" Hex Nuts, Grounding wire (No. 2 solid to 1/0 stranded), ELASTIMOLD approved lubricant, HV insulated caps (for unused bushings)
- De-energize Apparatus and Determine Location
Ensure all apparatus is de-energized before beginning installation. Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark all slot locations for drilling or fastener placement.
- Attach First Universal Brackets to Surface
Attach two universal brackets to the flat mounting surface using suitable fasteners. Tighten these fasteners securely to ensure there is no movement of the brackets during operation.
- Attach Remaining Universal Brackets
Attach the remaining two universal brackets to the two brackets already mounted on the surface. Position them at the desired angle using the supplied hardware, which includes 3/8” Hex Head Cap Screws, External Tooth Lock Washers, and 3/8” Hex Nuts. Tighten securely.
- Assemble Junction to Base Bracket and Plate
Assemble the deadbreak junction to the base bracket assembly and base plate. Use two 1/2” hex head cap screws, two 1/2” split lock washers, and two 1/2” hex nuts, attaching them to the center mounting holes on the bracket assembly. Tighten all components securely.
- Attach Junction Assembly to Universal Brackets
Attach the fully assembled deadbreak junction to the universal brackets that are mounted on the surface. Use the supplied hardware, including 1/2” Split Lock Washers, 1/2” Hex Nuts, and 1/2” Hex Head Cap Screws. Tighten securely and ensure the parking stand is in the upright position.
- Ground the Assembly
Ground the base bracket assembly and the junction’s black conductive jacket. A grounding lug is provided on the base bracket for this purpose. Connect a grounding wire (No. 2 solid to 1/0 stranded) to this lug and ensure a secure, low-resistance connection to earth ground.
- Prepare Operating Interfaces
Remove all protective shipping caps from the operating interfaces of the deadbreak junction. Clean each interface thoroughly and lubricate with an ELASTIMOLD approved lubricant. Do NOT substitute with other lubricants, as they may harm the product or its mating components.
- Install Insulated Caps on Unused Bushings
If not all operating interfaces will be utilized, install appropriate HV insulated caps on any unused bushing(s) before energizing the circuit. Do not use the protective shipping caps for this function, as they are not insulated and are only for keeping interfaces clean during handling.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.