
ABB Installation Products J2-26-25 2 Point Junction, one - 200 Amp Bushing Well interface, one - 600 Amp Bushing interface…
UPC: 783786414062
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 25KV voltage rating for medium-voltage applications
- Dual interface: 200 Amp Bushing Well and 600 Amp Bushing Interface
- Accommodates #6-350 MCM line wire and #8-250 MCM load wire
- Includes triplex ground lug for #14-2 conductors
- Comes with a mounting bracket for secure installation
- Top/bottom overhead/underground line feed entry
Specifications
Application | Suited for Subsurface, Vault or Padmount Applications and can be used for Sectionalizing, Looping, Tapping and Equipment Bypass |
Connection | Push-In |
Material | EPDM-Rubber and Stainless Steel Mounting Brackets |
Mounting | No Tilt Mounting Bracket |
Size | Overall Length 15 inches, Width 6-3/4 inches |
Special Features | 4 inch Center Spacing |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Multi-Point Junction - 2 Points |
Package Dimensions (L x W x H) | 1 IN x 1 IN x 1 IN |
Package Dimensions (L x W x H) | 2.54 cm x 2.54 cm x 2.54 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

J4-6226-15
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.
J2-22-15-SV-R
2 Point Junction, 15kV, with two 200 Amp Bushing Well Interfaces, 6-1/2 inch centers. Right Parking Stand.
J6-66P6P6-35
35kV, 6 Point Junction, 2 X (600 Amp Bushing Interface), 2 X (Parking Stand, 600 Amp Bushing Interface).
J5-62226-15-TMA
5 Point Junction, with one 600 Amp Bushing Interfaces, three 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interfaces, 15kV, Tilt Mounting Adapter.
J5-62266-15-SV
5 Point Junction, with one 600 Amp Bushing Interfaces, two 200 Amp Bushing Well Interfaces and two 600 Amp Bushing Interfaces, 15kV, 6-1/2 inch centers. No Tilt Mounting.
J5-22226-25-TMA
5 Point Junction, with four 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 25kV, Tilt Mounting Adapter.
J6-22222B-25-TMA
6 Point Junction, 5 200 Amp Bushing Well Interfaces and one Blank position, 25/28kV, Standard spacing on 4 inch centers, with Tilt Mounting Adapter.
J3-626-15-SV-N
3 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 15kV, 6-1/2 inch centers. No Parking Stand.Frequently Asked Questions
What are the current ratings for the ABB J2-26-25 junction?
The ABB J2-26-25 junction features one 200 Amp Bushing Well interface and one 600 Amp Bushing interface.
What is the voltage rating of the J2-26-25 junction?
The ABB J2-26-25 junction is rated for 25KV operation.
Does the J2-26-25 include a mounting bracket?
Yes, the ABB J2-26-25 junction comes with a bracket for installation.
How to Install a J2, J3, or J4 Deadbreak Junction (Universal Mount)
This guide provides step-by-step instructions for installing a two-, three-, or four-point deadbreak junction using the universal mount method. It covers determining the location, attaching mounting brackets, assembling the junction, and grounding. IMPORTANT SAFETY NOTE: All apparatus must be de-energized during installation. This product should only be installed by competent personnel trained in good safety practices involving high voltage electrical equipment.
Estimated time: 1h 30m
Tools needed:
Wrench or Socket Set (for 3/8 inch and 1/2 inch hex hardware), Measuring Tape, Marker, Wire Strippers
Supplies needed:
J2, J3, or J4 Deadbreak Junction, Base Bracket, Base Plate, 4 Universal Brackets, Mounting Hardware Prepack (3/8" and 1/2" hex screws, washers, nuts), Suitable Fasteners (for attaching universal brackets to mounting surface, user supplied), Grounding Wire (No. 2 solid to 1/0 stranded), ELASTIMOLD Approved Lubricant, HV Insulated Cap(s) or Connector(s) (for unused interfaces)
- Determine Location and Mark Mounting Slots
Determine the desired location for the junction assembly. Use the base plate as a template, place it on the mounting surface, and mark all slot locations for drilling or fastener placement.
- Attach Initial Universal Brackets to Surface
Attach two (2) universal brackets to the flat mounting surface using suitable fasteners (user supplied). Tighten these fasteners securely to prevent any movement of the brackets during operation.
- Attach Remaining Universal Brackets
Attach the remaining two (2) universal brackets to the two (2) universal brackets already mounted on the surface. Position them at the desired angle using the supplied hardware, which includes 3/8 inch hex head cap screws, external tooth lock washers, and 3/8 inch hex nuts. Tighten all connections securely.
- Assemble Junction to Base Bracket and Base Plate
Assemble the deadbreak junction to the base bracket assembly and the base plate. Use two (2) 1/2 inch hex head cap screws, two (2) 1/2 inch split lock washers, and two (2) 1/2 inch hex nuts. Attach these components to the center mounting holes on the bracket assembly. Tighten all hardware securely.
- Attach Junction Assembly to Universal Brackets
Attach the complete deadbreak junction assembly to the universal brackets using the supplied hardware, consisting of 1/2 inch split lock washers, 1/2 inch hex nuts, and 1/2 inch hex head cap screws. Tighten all connections securely. Ensure that the parking stand on the junction is in the upright position.
- Ground the Assembly
Ground the base bracket assembly and the black conductive jacket of the junction. A grounding lug is provided on the base bracket for this purpose; it is designed to accommodate grounding wire sizes from No. 2 solid to 1/0 stranded.
- Prepare Operating Interfaces for Energization
Remove all protective shipping caps from the operating interfaces and clean them thoroughly. Lubricate each interface with an ELASTIMOLD approved lubricant (do not substitute). If any operating interfaces are not utilized, install appropriate HV insulated caps on these unused bushings before energizing the circuit. Do NOT use the protective shipping caps for this function as they are not insulated.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.